Nov 1995 AR-2000 Series Ethernet Card Windows for Workgroups V3.11 Driver Installation ================================================ ********************************************************** * README for Windows for Workgroups V3.11 Installation * ********************************************************** The AR-2000 Series Ethernet LAN drivers cards for Windows for Workgroups 3.11 contained in this diskette are as follows: \WFW311\EZ2000.386 NDIS 3.0 WFW driver for Windows for Workgroups \WFW311\EZ2000.DOS NDIS 2.0 DOS driver for Windows for Workgroups \WFW311\EZODI.COM NetWare 3.X ODI driver for Windows for Workgroups \WFW311\NET.CFG NET.CFG file for Windows for Workgroups \WFW311\OEMSETUP.INF OEMSETUP file for Windows for Workgroups \DISK1 Installation Procedure: (1) When a LAN driver is installed, Windows for Workgroups will present a list of all available drivers. Since there will be no AR-2000 Series drivers (EZ2000.386, EZ2000.DOS and EZODI.COM driver programs ) initially, select UNLIST for 3rd party adapters not in the driver list. (2) Windows for Workgroups will ask for the drive/path containing the AR-2000 Windows for Workgroups drivers. Insert the driver diskette in drive A and respond with the following A:\WFW311 (3) Windows for Workgroups will attempt to locate an OEMSETUP.INF file in the specified path. If you have entered the path name correctly, Windows for Workgroups should copy the appropriate drivers to the Windows for Workgroups system. (4) At this point, the driver would have been properly copied and the installation would proceed to the next step. Please refer to your Windows for Workgroups installation guide for correct procedures. (5) After the initial installation, the AR-2000 drivers will be permanently copied to the Windows for Workgroups system. Subsequent network driver lists will already contain AR-2000 drivers. Note: If you can't install AR-2000 drivers on windows for workgroup, please check your windows\system subdirectory the OEMx.inf file. If the OEMx.inf counter is more than 10, please delete all OEMx.inf files.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.