1. G250_106.zip Driver
2. Config.INI File Contents

Config.INI Driver File Contents (G250_106.zip)

;-----------------------------------------------------------;
; Config.INI                                                ;
;                                                           ;
; Config --- ZINWELL Wireless LAN Configuration Tool        ;
;                                                           ;
; Company: ZINWELL Technology Corporation                   ;
; Author : ZINWELL 					    ;						
; Date   : 2004-1-29                                       ;
;-----------------------------------------------------------;

;-----------------------------------------------------------;
[Languages]
Language-1=English
Language-2=Chinese(Traditional)

[English]
UseDevice = "1"
DeviceName1 = "ZPlus-G250 802.11g WLAN USB2.0 Adapter"

;;;;;;;;;;;;;;;;;;;;;;;;;;;
; System Tray
;;;;;;;;;;;;;;;;;;;;;;;;;;;
TrayShow = "Show"
TrayAbout = "About"
TrayHide = "Hide"
TrayExit = "Exit"
TrayTip1 = "Connect to:"
TrayTip2 = "Signal Strength:"

;;;;;;;;;;;;;;;;;;;;;;;;;;;
; Main Menu
;;;;;;;;;;;;;;;;;;;;;;;;;;;
TabGeneral = "General"
TabSetting = "Setting"
TabSecurity = "Security"
TabSiteSurvey = "Site Survey"
TabStatistics = "Statistics"
TabProfile = "Profile"
TabInfo = "Info"
MainCancel = "Cancel"
MainApply = "OK"
MainHide = "Hide"



;;;;;;;;;;;;;;;;;;;;;;;;;;;
; General
;;;;;;;;;;;;;;;;;;;;;;;;;;;
GenTitle = "Connection"
ConnStatus = "Connect Status:"
SSID = "SSID:"
OpeMode = "Operation Mode:"
Channel = "Channel:"
Frequency = "Frequency:"
Security = "Security:"
BSSID = "BSSID:"
LinkRate = "Link Rate:"
GENNetworkType = "Network Type:"
LinkTitle = "Link Status"
Signal = "Signal Strength:"
Sent = "Sent:"
Received ="Received:"

;;;;;;;;;;;;;;;;;;;;;;;;;;;
; Settings
;;;;;;;;;;;;;;;;;;;;;;;;;;;
SetOpeMode = "Operation Mode:"
SetSSID = "SSID:"
SetChannel = "Channel:"
SetNetworkType = "Network Type:"
PowerSave = "Power Save Mode:"
FragThresh = "Fragmentation Threshold:"
RTSThresh = "RTS/CTS Threshold:"
SetCancel = "Cancel"
SetApply = "Apply"
SetRadio = "Radio ON/OFF:"
SetRadioStatus = "Status:"
SetRadioOn = "ON"
SetRadioOff = "OFF"

;;;;;;;;;;;;;;;;;;;;;;;;;;;
; Security
;;;;;;;;;;;;;;;;;;;;;;;;;;;
AuthenticationTitle = "Authentication"
AuthenticationMode = "Authentication Mode:"
KeyTitle = "WEP Setting"
KeyStatus = "WEP Enable / Disable"
KeyLength = "WEP Key Length:"
KeyFormat = "WEP Key Format:"
KeyDef = "Default Key:"
Key1 = "Key1:"
Key2 = "Key2:"
Key3 = "Key3:"
Key4 = "Key4:"
1XTitle = "IEEE 802.1x"
1XStatus = "802.1x Enable / Disable"
KeyCancel = "Cancel"
KeyApply = "Apply"

;;;;;;;;;;;;;;;;;;;;;;;;;;;
; Site Survey
;;;;;;;;;;;;;;;;;;;;;;;;;;;
ScanInfo1 = "11a"
ScanInfo2 = "11b"
ScanInfo3 = "11g"
ScanInfo4 = "Ad-Hoc"
ScanInfo5 = "Connect"
ScanButton = "Re-Scan"

;;;;;;;;;;;;;;;;;;;;;;;;;;;
; Profiles
;;;;;;;;;;;;;;;;;;;;;;;;;;;
ProfileTitle = "Profile"
ProfileList = "Profile List:"
ProfileDetail = "Detail:"	
ProfileManagement = "Profile Management:"	
ProfileNew = "New"
ProfileSave = "Save to file"
ProfileDelete = "Delete file"
ProfileLoad = "Apply value"


;;;;;;;;;;;;;;;;;;;;;;;;;;;
; Profiles Detail
;;;;;;;;;;;;;;;;;;;;;;;;;;;
PDSSID = "SSID:"
PDOperationMode = "Operation Mode:"
PDChannel = "Channel:"
PDAuthentication = "Authentication Mode:"
PDWepEnabled = "WEP Status:"
PD1X = "802.1x Status:"
PDKeyIndex = "Default KEY:"
PDKeyLength = "Key Length:"
PDKeyFormat = "Key Format:"
PDPowerSaveMode = "Power Save Mode:"
PDFragThreshold = "Fragmentation Threshold:"
PDRTSThreshold = "RTS/CTS Threshold:"
PDRadio = "Radio Status:"

;;;;;;;;;;;;;;;;;;;;;;;;;;;
; Info
;;;;;;;;;;;;;;;;;;;;;;;;;;;
Info = "System Information"
DeviceName = "Device Name:"
DriverVersion = "Driver Version:"
MacAdd = "MAC Address:"
UtilityVersion = "Configuration Utility Version:"
LanguageTitle = "Language Setting"
ApplyButton = "Apply Change"
CompanyNameTitle = "Company Name:"
CompanyName = "ZINWELL Inc."

;;;;;;;;;;;;;;;;;;;;;;;;;;;
; Profiles-Main 
;;;;;;;;;;;;;;;;;;;;;;;;;;;
PGTitle = "General"
PSTitle = "Security"
PMOK = "OK"
PMCancel = "Cancel"
PMApply = "Apply"



;;;;;;;;;;;;;;;;;;;;;;;;;;;
; Site menu
;;;;;;;;;;;;;;;;;;;;;;;;;;;
SiteConn = "Connect"
SiteSave = "Save as Profile"
SiteEdit = "Edit Connect"
SiteScan = "Rescan"


;;;;;;;;;;;;;;;;;;;;;;;;;;;
; Error Message
;;;;;;;;;;;;;;;;;;;;;;;;;;;
LanguageChange = "Language change Successfully!!"
AppRunning = "Application is already running!"
ApplySuccess = "Apply successfully!"
PDError1 = "Profile name can't be empty !"
PDError2 = "Profile name can't be "Active"!"
PDError3 = "Profile name can't be "Default"!"
PDError4 = "Profile name already exist!"
PDError5 = "You can't save to "Default"!"
PDError6 = "Profile name don't exist!"
PDError7 = "You can't delete "Default" !"


;;;;;;;;;;;;;;;;;;;;;;;;;;;;
; status
;;;;;;;;;;;;;;;;;;;;;;;;;;;;
StatusMessage1 = "Can't Find Adapter...."
StatusMessage2 = "Try to connect AP : "
StatusMessage3 = "AP not found! Use "Site Survey" for a new AP."
StatusMessage4 = "Connecting.."


[Chinese(Traditional)]
UseDevice = "1"
DeviceName1 = "ZPlus-G250 802.11g WLAN USB2.0 Adapter"

;;;;;;;;;;;;;;;;;;;;;;;;;;;
; System Tray
;;;;;;;;;;;;;;;;;;;;;;;;;;;
TrayShow = "Åã¥Ü"
TrayAbout = "Ãö©ó"
TrayHide = "ÁôÂÃ"
TrayExit = "°h¥X"
TrayTip1 = "³s½u¦Ü:"
TrayTip2 = "«H¸¹±j«×:"


;;;;;;;;;;;;;;;;;;;;;;;;;;;
; Main Menu
;;;;;;;;;;;;;;;;;;;;;;;;;;;
TabGeneral = "¤@¯ë"
TabSetting = "³]©w"
TabSecurity = "¥[±K"
TabSiteSurvey = "·j´M"
TabStatistics = "²Î­p"
TabProfile = "ÀÉ®×"
TabInfo = "¸ê°T"
MainCancel = "¨ú®ø"
MainApply = "½T©w"
MainHide = "ÁôÂÃ"

;;;;;;;;;;;;;;;;;;;;;;;;;;;
; General
;;;;;;;;;;;;;;;;;;;;;;;;;;;
GenTitle = "ºô¸ôª¬ºA"
ConnStatus = "³s½uª¬ºA:"
SSID = "SSID:"
OpeMode = "¾Þ§@¼Ò¦¡:"
Channel = "ÀW¹D:"
Frequency = "ÀW²v:"
Security = "¥[±Kª¬ºA:"
BSSID = "BSSID:"
LinkRate = "³s½u³t²v:"
GENNetworkType = "ºô¸ô¼Ò¦¡:"
LinkTitle = "³s½uª¬ºA"
Signal = "°T¸¹±j«×:"
Sent = "¶Ç°e:"
Received ="±µ¦¬:"

;;;;;;;;;;;;;;;;;;;;;;;;;;;
; Settings
;;;;;;;;;;;;;;;;;;;;;;;;;;;
SetOpeMode = "¾Þ§@¼Ò¦¡:"
SetSSID = "SSID:"
SetChannel = "ÀW¹D:"
SetNetworkType = "ºô¸ô¼Ò¦¡:"
PowerSave = "¬Ù¹q¼Ò¦¡:"
FragThresh = "¸ê®Æ¤À³ÎÁ{¬É­È:"
RTSThresh = "RTS/CTS Á{¬É­È:"
SetCancel = "¨ú®ø"
SetApply = "®M¥Î"
SetRadio = "µL½u¹q ¶}/Ãö:"
SetRadioStatus = "¥Ø«eª¬ºA:"
SetRadioOn = "¶}±Ò"
SetRadioOff = "Ãö³¬"

;;;;;;;;;;;;;;;;;;;;;;;;;;;
; Security
;;;;;;;;;;;;;;;;;;;;;;;;;;;
AuthenticationTitle = "¨­¥÷»{ÃÒ"
AuthenticationMode = "¨­¥÷»{ÃҤ覡:"
KeyTitle = "WEP ³]©w"
KeyStatus = "WEP ¶}±Ò / Ãö³¬"
KeyLength = "¥[±Kªø«×:"
KeyFormat = "¥[±K®æ¦¡:"
KeyDef = "¹w³] WEP Key:"
Key1 = "Key1:"
Key2 = "Key2:"
Key3 = "Key3:"
Key4 = "Key4:"
1XTitle = "IEEE 802.1x"
1XStatus = "802.1x ¶}±Ò / Ãö³¬"
KeyCancel = "¨ú®ø"
KeyApply = "®M¥Î"

;;;;;;;;;;;;;;;;;;;;;;;;;;;
; Site Survey
;;;;;;;;;;;;;;;;;;;;;;;;;;;
ScanInfo1 = "11a"
ScanInfo2 = "11b"
ScanInfo3 = "11g"
ScanInfo4 = "Ad-Hoc"
ScanInfo5 = "³s½u¤¤"
ScanButton = "­«·s·j´M"
;;;;;;;;;;;;;;;;;;;;;;;;;;;
; Profiles
;;;;;;;;;;;;;;;;;;;;;;;;;;;
ProfileTitle = "¹w³]­È"
ProfileList = "ÀɮײM³æ:"
ProfileDetail = "¸Ô²Ó¸ê®Æ:"	
ProfileManagement = "Àɮ׺޲z:"	
ProfileNew = "·s¼W"
ProfileSave = "Àx¦s¦ÜÀÉ®×"
ProfileDelete = "§R°£ÀÉ®×"
ProfileLoad = "®M¥Î³]©w"

;;;;;;;;;;;;;;;;;;;;;;;;;;;
; Profiles Detail
;;;;;;;;;;;;;;;;;;;;;;;;;;;
PDSSID = "SSID:"
PDOperationMode = "¾Þ§@¼Ò¦¡:"
PDChannel = "ÀW¹D:"
PDAuthentication = "¨­¥÷»{ÃҤ覡:"
PDWepEnabled = "WEP ª¬ºA:"
PD1X = "802.1x ª¬ºA:"
PDKeyIndex = "¹w³] WEP Key:"
PDKeyLength = "¥[±Kªø«×:"
PDKeyFormat = "¥[±K®æ¦¡:"
PDPowerSaveMode = "Power Save Mode:"
PDFragThreshold = "¸ê®Æ¤À³ÎÁ{¬É­È:"
PDRTSThreshold = "RTS/CTS Á{¬É­È:"
PDRadio = "µL½u¹qª¬ºA:"

;;;;;;;;;;;;;;;;;;;;;;;;;;;
; Info
;;;;;;;;;;;;;;;;;;;;;;;;;;;
Info = "¨t²Î¸ê°T:"
DeviceName = "¸Ë¸m¦WºÙ:"
DriverVersion = "ÅX°Êµ{¦¡ª©¥»:"
MacAdd = "MAC Address:"
UtilityVersion = "³nÅ骩¥»:"
LanguageTitle = "»y¨t³]©w"
ApplyButton = "®M¥Î»y¨t"
CompanyNameTitle = "¤½¥q¦WºÙ:"
CompanyName = "ZINWELL Inc."

;;;;;;;;;;;;;;;;;;;;;;;;;;;
; Site menu
;;;;;;;;;;;;;;;;;;;;;;;;;;;
SiteConn = "³s½u"
SiteSave = "Àx¦s¦Ü³]©wÀÉ"
SiteEdit = "½s¿è"
SiteScan = "­«·s·j´M"

;;;;;;;;;;;;;;;;;;;;;;;;;;;
; Error Message
;;;;;;;;;;;;;;;;;;;;;;;;;;;
LanguageChange = "»y¨t§ó§ï¦¨¥\!!"
AppRunning = "µ{¦¡¤w¸g°õ¦æ!"
ApplySuccess = "³]©w§¹¦¨!"
PDError1 = "ÀɦW¤£¥i¬°ªÅ¥Õ!"
PDError2 = "ÀɦW¤£¥i¬° "Active"!¡A¦¹¬°¥X¼t³]©w­È"
PDError3 = "ÀɦW¤£¥i¬° "Default"¡A¦¹¬°¥X¼t³]©w­È!"
PDError4 = "ÀɦW¤w¸g¦s¦b!"
PDError5 = "±z¤£¥i±N­È¦s¬° "Default"¡A¦¹¬°¥X¼t³]©w­È!"
PDError6 = "ÀɦW¨Ã¤£¦s¦b!"
PDError7 = "±z¤£¥i§R°£ "Default"¡A¦¹¬°¥X¼t³]©w­È !"

;;;;;;;;;;;;;;;;;;;;;;;;;;;;
; status
;;;;;;;;;;;;;;;;;;;;;;;;;;;;
StatusMessage1 = "©|¥¼µo²{ºô¸ô¥d...."
StatusMessage2 = "¹Á¸Õ³sµ²°ò¦a¥x : "
StatusMessage3 = "µLªk³sµ²!½Ð¨Ï¥Î"·j´M"´M§ä°ò¦a¥x."
StatusMessage4 = "¥¿¦b³s½u¤¤..."