#-------------------------------------- #-------------------------------------- # AT100 Configuration File: #-------------------------------------- #--------------------------------------- # # #-------------------------------------- # WAN SETUP CONFIGURATION #-------------------------------------- # Encapsulation is LLC or VC # ENCAPSULATION = VC VPI = 8 VCI = 35 # # Adsl standard can be the combinaiton of the following separated by '+' or ' ' : # ANNEXA_T1_413 + ANNEXA_G_DMT + ANNEXB_G_DMT + ANNEXA_DSL2 + ANNEXB_DSL2 # + ANNEXL_DSL2 + ANNEXM_DSL2 + ANNEXB_DSL2PLUS + ANNEXA_DSL2PLUS # #ADSL_STANDARD = # # Protocol: PPPOA or PPPOE or BRIDGE or ROUTED_BRIDGE or MER # PROTOCOL = PPPOE WAN_IP = null WAN_NETMASK = null WAN_ENABLE_NAT = YES WAN_ENABLE_DHCP = NO # PPP_USERNAME = defuser@isp : this will set the default tab to wizard PPP_USERNAME = sagem@jazztel PPP_PASSWORD = sagem # # Authentication: Can be CHAP or PAP # PPP_AUTH = CHAP # # Dialing Mode: Can be AUTO or DIRECT # PPPOE_DIALING_MODE = DIRECT # # Idle Time Out: In minutes # PPPOE_IDLE_TIMEOUT = 2 # #-------------------------------------- # LAN SETUP CONFIGURATION #-------------------------------------- # DEFAULT_ETH0_IP = 192.168.1.1 DEFAULT_ETH0_SUBNET_MASK = 255.255.255.0 ETH0_DHCP_ENABLE = YES ETH0_DHCP_START_IP = 192.168.1.10 ETH0_DHCP_END_IP = 192.168.1.50 ETH0_DHCP_SUBNET_MASK = 255.255.255.0 ETH0_DHCP_GATEWAY = 192.168.1.1 ETH0_DHCP_PRIMARY_DNS = 62.14.2.1 ETH0_DHCP_SECONDARY_DNS = 62.14.63.145 ETH0_DHCP_LEASE_DAYS = 7 # ETH0_USB0_BRIDGE_ENABLE = YES # DEFAULT_USB0_IP = 192.168.2.1 DEFAULT_USB0_SUBNET_MASK = 255.255.255.0 USB0_DHCP_ENABLE = NO USB0_DHCP_START_IP = 192.168.2.10 USB0_DHCP_END_IP = 192.168.2.50 USB0_DHCP_SUBNET_MASK = 255.255.255.0 USB0_DHCP_GATEWAY = 192.168.2.1 USB0_DHCP_PRIMARY_DNS = 62.14.2.1 USB0_DHCP_SECONDARY_DNS = 62.14.63.145 USB0_DHCP_LEASE_DAYS = 7 #-------------------------------------- # GENERAL SETUP CONFIGURATION #-------------------------------------- LANGUAGE = null DEFAULT_ADMIN_USERNAME = root DEFAULT_ADMIN_PASSWORD = 1234Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.