;***************************************************************************** ; ; Name: zebrserw.inf ; ; Function: ; Install the Sony Ericsson Port (WDM) ; ; Copyright (c) 1997-2006 MCCI ; ; MCCI is a registered trademark of Moore Computer Consultants, Inc ; ; NOTICE: This software is licensed, not sold. Any modification of this ; inf file to change the reference to an operating system or to change the ; reference to a device is not permitted unless authorized in writing by ; Moore Computer Consultants, Inc.. ; ;***************************************************************************** [Version] signature="$CHICAGO$" Class=USB ClassGuid={36FC9E60-c465-11cf-8056-444553540000} Provider=%Provider% DriverVer=05/31/2006, 4.38.6.212 CatalogFile=zebrmdm.cat [ControlFlags] ExcludeFromSelect = * ;----------------------------------------------------------------------------- ; Change A:\ to source drive (or omit to always (?) be prompted) ;----------------------------------------------------------------------------- [SourceDisksNames] ; diskid = description[, [tagfile] [, <unused>, subdir]] ; having the tagfile non-null seems to help... 1=%DiskString%,"zebrmdm.sys",, [SourceDisksFiles] ; filename = diskid[,[ subdir][, size]] zebrmdm.sys = 1 zebrcr.sys = 1 zebrvcr.vxd = 1 zebrcm95.sys = 1 zebrcmnt.sys = 1 zebrcomm.vxd = 1 zebrvcd.vxd = 1 ;----------------------------------------------------------------------------- ; Specify target paths... ;----------------------------------------------------------------------------- [DestinationDirs] DefaultDestDir = 11 ; LDID_SYS ;----------------------------------------------------------------------------- ; Table of Contents ;----------------------------------------------------------------------------- [Manufacturer] %SEMC%=SEMC ;----------------------------------------------------------------------------- ; Device-by-device entries ;----------------------------------------------------------------------------- [SEMC] %SerialA1%=Install.1,USB\VID_0FCE&PID_E012&MI_01&OS_9X %SerialB1%=Install.2,USB\VID_0FCE&PID_E012&MI_03&OS_9X %SerialA1%=Install.1,USB\VID_0FCE&PID_E011&MI_01&OS_9X %SerialB1%=Install.2,USB\VID_0FCE&PID_E011&MI_03&OS_9X %SerialA1%=Install.1,USB\VID_0FCE&PID_E010&MI_01&OS_9X %SerialB1%=Install.2,USB\VID_0FCE&PID_E010&MI_03&OS_9X ;----------------------------------------------------------------------------- ; Installation instructions ;----------------------------------------------------------------------------- [Install.1] AddReg = SEMC.AddReg, SEMC.W95.AddReg, SEMC.W95.AddReg.1 CopyFiles = CopyFiles, CopyFiles.W95, CopyFiles.sys, CopyFiles.W95.sys, CopyFiles.W95.Inf DriverVer=05/31/2006, 4.38.6.212 [SEMC.W95.AddReg.1] HKR,,CrGuid,,{8272F932-117D-48be-A878-32CA24F6718D} [Install.2] AddReg = SEMC.AddReg, SEMC.W95.AddReg, SEMC.W95.AddReg.2 CopyFiles = CopyFiles, CopyFiles.W95, CopyFiles.sys, CopyFiles.W95.sys, CopyFiles.W95.Inf DriverVer=05/31/2006, 4.38.6.212 [SEMC.W95.AddReg.2] HKR,,CrGuid,,{8272F931-117D-48be-A878-32CA24F6718D} ;----------------------------------------------------------------------------- ; Registry ;----------------------------------------------------------------------------- ; common registry entries [SEMC.AddReg] HKR,,NTMPDriver,,zebrmdm.sys HKR,,CRUpperDescription,,%UpperDescription% HKR,,OverrideDefaultPortSettings, 0x10001, 01,00,00,00 HKR,,InitialBaudRate, 0x10001, 00,C2,01,00 ;115200 initial baud rate HKR,,InitialLineControl,, "8N1" ;8-bits, No parity, 1 stop bit ; only for Win95.... [SEMC.W95.AddReg] HKR,,DevLoader,,*ntkern ;----------------------------------------------------------------------------- ; Copy lists ;----------------------------------------------------------------------------- [CopyFiles] [CopyFiles.W95] zebrvcr.vxd zebrcomm.vxd zebrvcd.vxd [CopyFiles.sys] zebrmdm.sys zebrcr.sys [CopyFiles.W95.sys] zebrcm.sys,zebrcm95.sys zebrcm95.sys zebrcmnt.sys [Copyfiles.W95.inf] ;----------------------------------------------------------------------------- ; STRINGS ;----------------------------------------------------------------------------- [Strings] ;BEGIN ENG - US English Strings Provider = "Sony Ericsson Mobile Communications AB" SEMC = "Sony Ericsson Mobile Communications AB" DiskString = "Sony Ericsson Port Installation Disk" UpperDescription = "Sony Ericsson Port Driver (VCOMM)" SerialA1 = "Sony Ericsson Master Port" SerialB1 = "Sony Ericsson Slave Port" CustomerDataPath = "Sony Ericsson" DriverSet = "Sony Ericsson Symbian 9 Drivers" UninstallFile = "ZEBRUninstall.exe" McciOptions = "Uninstallable NotInstallOnWinVer5" ;END ENG - US English Strings ;----------------------------------------------------------------------------- ; The following are symbolic constants which don't change per locale. ;----------------------------------------------------------------------------- ;*** end of file ***Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.