//********************** C-Media AC97 UDA driver Release Note ***********************// 5.12.1.0029 ----------------- Library version 026 0029-1 1. improve high pass filter for recording 2. hide front/rear exchange forever 3. synchronization for Hyper-threading 4. fix card retrival noise on VIA 0029-2 1. Interrupt for Timer (based on VIA) 2. Mic as Rear 0029-3 1. setup h/w register while volume < RecordTH 2. fix bug on center/bass sharing 3. default boost disable & gain to 3dB 4. enable S/PDIF valid while enable analog input monitoring 5. rsolve AC/3 encoder hang problem 6. add i/o delay on VIA 5.12.1.0028 ----------------- 1.Configuration Interface Revision (1)Add in "Microphone" tab (2)Move XeaR 3D function to an independent tab (3)Must click radio button to activate the switch of speaker types (4)Add Loudness (3-12dB) and Auto-Gain-Control in volume control (5)Add information for new audio controller (south-bridge) (6)Use Windows XP standard window in WinXP 2.Add "wave" slider for recording wave 4.Support ALI1563 south-bridge 5.15 languages support 5.12.1.0027 ----------------- 1.S-Bracket Auto-Detection 2.Driver installation/update without setup program will contain Xear 3D Advanced program 3.Support ICH5 south-bridge 5.12.1.0026 ----------------- 1. Microsoft Mixer Wave can control all channels 2. support SCMS (S/PDIF CopyRight bit) 3. improve DC offset 4. version (6.6) for property interface 5. support 5.1 & 4 channel on ALI5451, SiS7018 5.12.1.0025 ---------------- 1. add S/PDIF Valid control in mixer for recording 2. add "Room Size" for Global Reverb 3. mute MIC while multi-channel mode and share mode 4. S/PDIF Loop support on new 9739 codec 5. fix some bugs on Jacks info 6. registry key "FrontRearXchg" for ear phone plus 5.12.1.0024 ---------------- 1. support XeaR speaker shifter 2. 10-band equalizer support 3. dynamic phone jacks architecture 4. two options for XeaR mode, one is front/rear exchanging the other is defining XeaR 3D mode 5.12.1.0023 ---------------- 1. fix SiS 961B/962B power management problem on S/PDIF 2. fix a bug on read/write registry 5.12.1.0022 ----------------- 1. fix the problem that multi-channel audio demo crash 5.12.1.0021 ---------------- 1. fix the click noise while speaker mode swapping (costomer complain the click noise while changing speaker mode) 2. chip version can be get by user mode program (CPL can show chip info by the feature) 3. Alternate MIC (MIC2) support (Advanced button in Microphone source in Mixer) 4. Center/Bass content can be swapped by user interface (controlled by CPL) 5 9739, Analog signal (LineIn, Mic ...) can be translated to S/PDIF OUT (controlled by CPL) 6. new way for S/PDIF control 7. fix SiS961B S/PDIF clock misfunction problem. 8. add switch for "Bass Enhancement" (controlled by CPL) 9. fix the bug 9739 cannot pass Wave DSound HCT test 10. remove Validity selection for S/PDIF on Mixer. 11. S/PDIF Validity is controlled by audio format (PCM:0, Non-PCM:1) 12. separate registry key for each speaker configuration.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.