INSTALL.TXT Driver File Contents (MB123LND.ZIP)

   SCO UnixWare 7.x

      This document describes the procedure to install the SCO UnixWare 7
      driver for Realtek RTL8139C+/8139/810x Family Fast Ethernet Adapter.

   Location of Driver:     \uw7\rtspkg.tar

   Installing driver procedure on SCO UnixWare7 :
      Before you start with the installation  process,  make sure that the
      SCO UNIX system is properly installed. Similarly, your adapter should
      also be properly installed in your machine.

     1. Installation Diskette in DOS format.
        Put RTL SCO UnixWare Driver diskette to floppy A: and use doscp
        command to copy RTL SCO UnixWare Driver into UNIX's directories.
        NOTE: In UnixWare 7.1.1, you must install the "mtools" package included
              within the OS and use "mcopy" instead of "doscp".

       # cd /
       # doscp A:uw7/rtspkg.tar  /tmp

     2. Run 'tar' utility to extract the driver.

       # cd /tmp
       # tar -xvf rtspkg.tar

     3. Run 'pkgadd' utility to add the driver software to system.

       # pkgadd -d /tmp/pkg
         => Select "RTL8139" to add the driver package to the system.
         => quit

     4. Use 'scoadmin' utility to add adapters.

       # scoadmin
         => Select "Networking" item from the item list and press enter.
         => Select "Network Configuration Manager" item from the item list
            and press enter.
         => Select "Add New Lan Adapter" menu item from "Hardware".
         => Select the Realtek RTL8139C+/8139/810x item from the item list.
         => Add protocol(s) to the adapter.

     5.  Return to the command prompt.

     6.  Shutdown the system and reboot.

     NOTE: 1. If you want to install more than one network adapter, you
              should do the 4th, 5th, 6th steps above for each network card
           2. This driver can support up to four network adapters.
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web2, load: 1.12