;============================================================================ ; Current Version %VER 4.0.0.2 ;============================================================================ [Identification] OptionType = NetTransport [Options] S24TRANS [FileConstants] UtilityInf = "UTILITY.INF" subroutineinf = "SUBROUTN.INF" SoftwareType = "transport" InfName = "OEMNXP24.inf" Exit_Code = 0 NetEventDLL = "%SystemRoot%\System32\netevent.dll" Manufacturer = "Symbol Technologies, Inc." ProductMajorVersion = "4" ProductMinorVersion = "01" ProductVersion = $(ProductMajorVersion)"."$(ProductMinorVersion) ProductSoftwareName = "s24trans" ProductSoftwareImagePath = "\SystemRoot\System32\drivers\s24trans.sys" NetRuleSoftwareType = "s24trans lmNetService ndisTransport" NetRuleSoftwareClass = {"rasCapableTransport netBiosTransport"} NetRuleSoftwareUse = $(SoftwareType)" yes yes" NetRuleSoftwareBindForm = """s24trans"" yes yes simple" ProductKeyName = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(ProductSoftwareName)"\CurrentVersion" ParamKeyName = $(!NTN_ServiceBase)"\"$(ProductSoftwareName)"\Parameters" [GeneralConstants] from = "" to = "" ExitCodeOk = 0 ExitCodeCancel = 1 ExitCodeFatal = 2 KeyNull = "" MAXIMUM_ALLOWED = 33554432 RegistryErrorIndex = NO_ERROR KeyProduct = "" KeyParameters = "" TRUE = 1 FALSE = 0 NoTitle = 0 ExitState = "Active" OldVersionExisted = $(TRUE) DriverPath = $(!STF_NTPATH)\drivers [date] Now = {} ? $(!LIBHANDLE) GetSystemDate [Identify] read-syms Identification set Status = STATUS_SUCCESSFUL set Identifier = $(OptionType) set Media = #("Source Media Descriptions", 1, 1) Return $(Status) $(Identifier) $(Media) [ReturnOptions] set Status = STATUS_FAILED set OptionList = {} set OptionTextList = {} set LanguageList = ^(LanguagesSupported, 1) Ifcontains(i) $($0) in $(LanguageList) goto returnoptions else set Status = STATUS_NOLANGUAGE goto finish_ReturnOptions endif returnoptions = + set OptionList = ^(Options, 1) set OptionTextList = ^(OptionsText$($0), 1) set Status = STATUS_SUCCESSFUL finish_ReturnOptions = + Return $(Status) $(OptionList) $(OptionTextList) [InstallOption] Set !G:DebugOutputControl = 1 Set !DebugOutputControl = 1 Set !STF_DISPLAYDEBUGOUTPUT = 1 set Option = $($1) set SrcDir = $($2) set AddCopy = $($3) set DoCopy = $($4) set DoConfig = $($5) set szDLLPath = $($6) Debug-Output "OEMNXP24.INF: szDLLPath is: "$(szDLLPath) set LanguageList = ^(LanguagesSupported, 1) Ifcontains(i) $($0) NOT-IN $(LanguageList) Debug-Output "OEMNXP24.INF: STATUS_NOLANGUAGE"$($0) Return STATUS_NOLANGUAGE endif Debug-Output "OEMNXP24.INF: STF_CWDDIR is: "$(!STF_CWDDIR) Debug-Output "OEMNXP24.INF: STF_LANGUAGE is: "$(!STF_LANGUAGE) set-subst LF = "\n" read-syms GeneralConstants read-syms FileConstants read-syms DialogConstants$(!STF_LANGUAGE) ifstr(i) $(!NTN_Origination) == "NCPA" set Continue = $(OK) endif read-syms FileConstants$(!STF_LANGUAGE) detect date set-title $(FunctionTitle) set to = Begin set from = Begin set CommonStatus = STATUS_SUCCESSFUL EndWait Begin = + Ifstr(i) $(!NTN_InstallMode) == deinstall set StartLabel = removeadapter else-Ifstr(i) $(!NTN_InstallMode) == Update set StartLabel = UpgradeSoftware else-Ifstr(i) $(!NTN_InstallMode) == bind set StartLabel = bindingadapter else-Ifstr(i) $(!NTN_InstallMode) == configure Shell $(UtilityInf),RegistryErrorString,CANNOT_CONFIGURE_SOFTWARE ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "OEMNXP24.INF: ShellCode error: cannot get an error string." goto ShellCodeError endif set Error = $($R0) set from = end set to = end goto nonfatalinfo else set StartLabel = installadapter endif set RadioDefault = 2 set RadioIn = {$(RadioDefault)} set from = $(fatal) set to = $(fatal) goto $(StartLabel) installadapter = + Debug-Output "OEMNXP24.INF: installadapter" OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct Ifstr $(KeyProduct) != $(KeyNull) Debug-Output "OEMNXP24.INF: Found an already installed version - exit" CloseRegKey $(KeyProduct) Shell $(UtilityInf), VerExistedDlg, $(ProductSoftwareTitle), $(ProductVersion) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error: cannot get an error string." goto ShellCodeError endif goto end endif CloseRegKey $(KeyProduct) goto installproduct installproduct = + Debug-Output "OEMNXP24.INF: installproduct" StartWait ifint $(OldVersionExisted) == $(FALSE) Ifstr(i) $(DoCopy) == "YES" Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES Ifint $($ShellCode) != $(!SHELL_CODE_OK) Goto ShellCodeError Else-Ifstr(i) $($R0) == STATUS_FAILED Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL" ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) Goto fatal Else-Ifstr(i) $($R0) == STATUS_USERCANCEL Goto successful Endif Set SrcDir = $($R1) Endif Endif ;install "Install-Option" ;ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS ; Shell $(UtilityInf) RegistryErrorString "UNABLE_COPY_FILE" ; ifint $($ShellCode) != $(!SHELL_CODE_OK) ; goto ShellCodeError ; endif ; Set Error = $($R0) ; Goto fatal ;Endif Debug-Output "OEMNXP24.INF: call UtilityInf to add TDI component" Set OEM_ABANDON_ON = TRUE Shell $(UtilityInf), AddSoftwareComponent, $(Manufacturer), + $(ProductSoftwareName), + $(ProductSoftwareName), + $(ProductSoftwareDisplayName), $(STF_CONTEXTINFNAME), + $(ProductSoftwareImagePath), "kernel", "TDI", {}, "",+ $(NetEventDLL) Set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR EndWait CloseRegKey $($R1) CloseRegKey $($R2) CloseRegKey $($R3) CloseRegKey $($R4) CloseRegKey $($R5) goto fatalRegistry endif Set SoftProductKey = $($R1) Set SoftNetRuleKey = $($R2) Set SoftServiceKey = $($R3) Set KeyParameters = $($R4) Set SoftLinkageKey = $($R5) Set NewValueList = {{SoftwareType,$(NoTitle),$(!REG_VT_SZ),$(SoftwareType)},+ {MajorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMajorVersion)},+ {MinorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMinorVersion)},+ {Title,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareTitle)},+ {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareDescription)},+ {ServiceName,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareName)},+ {hidden,$(NoTitle),$(!REG_VT_DWORD),1}, + {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}} Debug-Output "OEMNXP24.INF: call UtilityInf to add Service component" Shell $(UtilityInf), AddValueList, $(SoftProductKey), $(NewValueList) Set RegistryErrorIndex = $($R0) Ifstr $(RegistryErrorIndex) != NO_ERROR CloseRegKey $(SoftProductKey) CloseRegKey $(SoftNetRuleKey) CloseRegKey $(SoftServiceKey) CloseRegKey $(SoftLinkageKey) CloseRegKey $(KeyParameters) Goto fatalRegistry endif Set NewValueList = {{type ,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareType)}, + {use ,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareUse)}, + {bindform,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareBindForm)}, + {Infname ,$(NoTitle),$(!REG_VT_SZ),$(InfName)}, + {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}} Debug-Output "OEMNXP24.INF: call UtilityInf to add Transport component" Shell $(UtilityInf), AddValueList, $(SoftNetRuleKey), $(NewValueList) Set RegistryErrorIndex = $($R0) Ifstr $(RegistryErrorIndex) != NO_ERROR CloseRegKey $(SoftProductKey) CloseRegKey $(SoftNetRuleKey) CloseRegKey $(SoftServiceKey) CloseRegKey $(SoftLinkageKey) CloseRegKey $(KeyParameters) Goto fatalRegistry endif Set NewValueList = {{NbProvider,$(NoTitle),$(!REG_VT_SZ),"_nb"}} Shell $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList) Ifstr $(RegistryErrorIndex) != NO_ERROR CloseRegKey $(SoftProductKey) CloseRegKey $(SoftNetRuleKey) CloseRegKey $(SoftServiceKey) CloseRegKey $(SoftLinkageKey) Goto fatalRegistry endif CloseRegKey $(SoftProductKey) CloseRegKey $(SoftNetRuleKey) CloseRegKey $(SoftServiceKey) CloseRegKey $(SoftLinkageKey) ; Install service ; Set serviceBin = $(!STF_WINDOWSSYSPATH)\S24EvMon.exe ; Debug-Output "OEMNXP24.INF: call LoadLibrary to get LibHand" ; LoadLibrary "Setup Disk #1" $(szDLLPath) LibHand ; Debug-Output "OEMNXP24.INF: call LibraryProcedure to add SERVICE: "$(serviceBin) ; LibraryProcedure ResultList, $(LibHand), CmdInstallService $(serviceBin) ; Debug-Output "OEMNXP24.INF: Service Added free library" ; Free DLL ; FreeLibrary $(LibHand) goto writeparameters writeparameters = + CloseRegKey $(KeyParameters) EndWait goto successful bindingadapter =+ set Error = "Binding: Sorry, not yet implemented." goto fatal removeadapter = + Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), + $(ProductSoftwareName) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error" goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR goto fatalregistry endif ; Remove service ; LoadLibrary "x" $(szDLLPath) LibHand ; LibraryProcedure ResultList, $(LibHand), CmdRemoveService "" ; Free DLL ; FreeLibrary $(LibHand) ; remove installed files AddfileToDeleteList $(!STF_WINDOWSSYSPATH)"\drivers\S24Trans.SYS" Debug-Output "Remove Adapter file "$(!STF_WINDOWSSYSPATH)"\drivers\S24Trans.SYS" AddfileToDeleteList $(!STF_WINDOWSSYSPATH)"\S24Evmon.exe" Debug-Output "Remove Adapter file "$(!STF_WINDOWSSYSPATH)"\S24Evmon.exe" AddfileToDeleteList $(!STF_WINDOWSSYSPATH)"\S24MuDll.dll" Debug-Output "Remove Adapter file "$(!STF_WINDOWSSYSPATH)"\S24MuDll.dll" AddfileToDeleteList $(!STF_WINDOWSSYSPATH)"\oemnxp24.inf" Debug-Output "Remove Adapter file "$(!STF_WINDOWSSYSPATH)"\oemnxp24.inf" goto end UpgradeSoftware = + ifstr(i) $(ProductKeyName) == $(!NTN_RegBase) OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct Ifstr $(KeyProduct) != $(KeyNull) GetRegValue $(KeyProduct),"MajorVersion", VersionInfo set Version = *($(VersionInfo), 4) Shell $(UtilityInf), GetInfFileNameFromRegistry, $(KeyProduct) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error" goto ShellCodeError endif set !UG_Filename = $($R0) ifstr(i) $(!UG_Filename) != "" install "Install-Update" ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS goto fatal endif endif SetRegValue $(KeyProduct) {MajorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMajorVersion)} SetRegValue $(KeyProduct) {MinorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMinorVersion)} ifint $(Version) != $(ProductVersion) endif CloseRegKey $(KeyProduct) else goto fatalregistry endif endif goto end successful = + goto end warning = + Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "WARNING", $(Error) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif ifstr(i) $($R1) == "OK" goto $(to) else-ifstr(i) $($R1) == "CANCEL" goto $(from) else goto "end" endif nonfatalinfo = + Set CommonStatus = STATUS_USERCANCEL Set Severity = STATUS goto nonfatalmsg nonfatal = + Set Severity = NONFATAL goto nonfatalmsg nonfatalmsg = + ifstr(i) $(Error) == "" Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL" ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) endif Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), $(Severity), $(Error) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif ifstr(i) $($R1) == "OK" goto $(from) else goto "end" endif fatalregistry = + Shell $(UtilityInf) RegistryErrorString $(RegistryErrorIndex) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) goto fatal fatal = + ifstr(i) $(Error) == "" Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL" ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) endif Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "FATAL", $(Error) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif goto setfailed ShellCodeError = + set DlgType = "MessageBox" set STF_MB_TITLE = $(ShellCodeErrorTitle) set STF_MB_TEXT = $(ShellCodeErrorText) set STF_MB_TYPE = 1 set STF_MB_ICON = 3 set STF_MB_DEF = 1 ui start "Error Message" goto setfailed setfailed = + set CommonStatus = STATUS_FAILED ifstr(i) $(OEM_ABANDON_ON) == TRUE set OEM_ABANDON_ON = FALSE goto removeadapter endif goto end end = + goto term term = + Return $(CommonStatus) [Install-Option] set STF_VITAL = "" ifstr(i) $(AddCopy) == "YES" AddSectionFilesToCopyList Files-$(Option) $(SrcDir)Protocol\$(!STF_PLATFORM) $(!STF_WINDOWSSYSPATH)\drivers AddSectionFilesToCopyList Files-Inf $(SrcDir) $(!STF_WINDOWSSYSPATH) endif ifstr(i) $(DoCopy) == "YES" set !STF_NCPA_FLUSH_COPYLIST = TRUE CopyFilesInCopyList endif ifstr(i) $(DoConfig) == "YES" endif Exit [Install-Update] set STF_VITAL = "" set STF_OVERWRITE = "VERIFYSOURCEOLDER" AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers AddSectionFilesToCopyList Files-Inf $(SrcDir) $(!STF_WINDOWSSYSPATH) set !STF_NCPA_FLUSH_COPYLIST = TRUE CopyFilesInCopyList exit [Source Media Descriptions] ; 1 = "Spectrum24 Packet Driver Installation Disk" , TAGFILE = s24trans [ProductType] STF_PRODUCT = Winnt STF_PLATFORM = I386 [Files-Inf] ;1,oemnxp24.inf, SIZE=3000 [Files-S24TRANS] ;1,s24trans.sys, SIZE=70000 ;1,S24EvMon.exe, OVERWRITE=ALWAYS, COPY, DESTINATION=$(!STF_WINDOWSSYSPATH), SIZE=80000 ;1,S24MuDll.dll, OVERWRITE=ALWAYS, COPY, DESTINATION=$(!STF_WINDOWSSYSPATH), SIZE=80000 [LanguagesSupported] ENG [OptionsTextENG] NDISPERF = "Wireless LAN Transport Driver" [FileConstantsENG] ProCaption = "Windows NT Setup" ProCancel = "Cancel" ProCancelMsg = "Windows NT Networking is not correctly installed. "+ "Are you sure you want to cancel copying files?" ProCancelCap = "Network Setup Message" ProText1 = "Copying:" ProText2 = "To:" FunctionTitle = "Packet Driver" ProductSoftwareDescription = "Wireless LAN Transport Driver" ProductSoftwareDisplayName = "Wireless LAN Transport Driver" ;ProductSoftwareTitle = "Wireless LAN Transport Driver" ProductSoftwareTitle = "WLAN Transport" ShellCodeErrorTitle = "Error: "$(FunctionTitle) ShellCodeErrorText = "Shell Code Error." [DialogConstantsENG] Help = "&Help" Exit = "Cancel" OK = "OK" HelpContext = "" Continue = "Continue" Cancel = "Cancel" [FileDependentDlgENG] GroupLabel = "Optimization:" Radio1 = "&Minimize Memory Used" Radio2 = "&Balance" Radio3 = "M&aximize Throughput && Connections" DlgType = "Radio" DlgTemplate = "NBF" Caption = $(FunctionTitle) OptionsGreyed = {} HelpContext = $(!IDH_DB_OEMNXP24_INS)Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.