*****************************************************************************
* *
* 32-Bit PCI Fast Ethernet Adapter NDIS/2 Driver *
* *
*****************************************************************************
The drivers you need are in the directories MSLANMAN.DOS, MSLANMAN.OS2
and NDIS. The NDIS drivers contained in these subdirectories are used with
3Com 3+Open, Microsoft OS/2 LAN Manager OEM distribution Release 2.x,
and other compatible OEM versions of LAN Manager. The driver can also used
with IBM LAN Server 3.0, 4.0, Banyan VINES, ARTISOFT LANtastic 5.0, 6.0,
Microsoft Windows for Workgroups v3.1, DEC PATHWORKS, Sun PC-NFS etc.
The drivers named RTSND conform to the Network Driver Interface Specification
(NDIS) defined by Microsoft/3Com.
Included in MSLANMAN.DOS, and NDIS2 subdirectories are the following files:
\MSLANMAN.DOS\DRIVERS\ETHERNET\RTL8139
RTSND.DOS The DOS NDIS MAC driver
PROTOCOL.INI A sample section of PROTOCOL.INI file
\MSLANMAN.DOS\DRIVERS\NIF\
RTSND.NIF Network Information File
Included in MSLANMAN.OS2, and NDIS subdirectories are the following files:
\MSLANMAN.OS2\DRIVERS\ETHERNET\RTL8139
RTSND.OS2 The OS2 NDIS MAC driver
PROTOCOL.INI A sample section of PROTOCOL.INI file
\MSLANMAN.OS2\DRIVERS\NIF\
RTSND.NIF Network Information File
\NDIS2
NDIS.TXT This readme file
WFW31.TXT The Installation guide for
Windows for Workgroups v3.1
LANMAN.TXT The Installation guide for LAN Manager
LANSVR.TXT The Installation guide for Lan Server
BANYAN.TXT The Installation guide for Banyan VINES
LANTASTI.TXT The Installation guide for ARTISOFT LANtastic 5.0, 6.0
PATHWORK.TXT The Installation guide for DEC PATHWORKS
PCNFS.TXT The Installation guide for Sun PC-NFS
\NDIS2\DOS
RTSND.NIF Network Information File for IBM Lan Support Program
RTSND.DOS The DOS NDIS/2 MAC driver
OEMSETUP.INF Network Information File for Windows for Workgroups
v3.1
PROTOCOL.INI A sample section of PROTOCOL.INI file
\NDIS2\OS2
RTSND.NIF Network Information File for IBM LAN Server 3.0, 4.0
RTSND.OS2 The OS2 NDIS/2 MAC driver
PROTOCOL.INI A sample section of PROTOCOL.INI file
Sample PROTOCOL.INI Files and Parameters
----------------------------------------
[RTSND_NIF]
DriverName = RTSND$
MEDIUM=_AUTO ;Specify adapter's medium which identifys
;adapter's speed and duplex mode.
; MEDIUM=_AUTO operate on auto negotiation mode
; MEDIUM=_10HALF operate on 10M/HalfDuplex mode
; MEDIUM=_10FULL operate on 10M/Fullduplex mode
; MEDIUM=_100HALF operate on 100M/HalfDuplex mode
; MEDIUM=_100FULL operate on 100M/Fullduplex mode
;Multiple adapters keyword "EtherID" or "BusNo" & "DeviceNo"
;EtherID=@00123456789A ;The keyword "EtherID" is used to desinate a adapter's
;ethernet address when multiple adapters exist.
;BusNo=0 ;The keyword "BusNo" & "DeviceNo" are used together
;DeviceNo=10 ;to desinate a adapter when multiple adapters exist.
There are several parameters included in the RTSND_NIF section of the
PROTOCOL.INI file. However, the only parameter that you should specify
is the "drivername."
If you change other parameter settings, such as the _100FULL, make sure
that it matches the hardware setting. Otherwise, the adapter may fail.
If you don't specify these settings, the NDIS/2 driver
will automatically detect them.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.