Additional Information
Multimedia Pro16 Audio Setup V1.20
This file contains additional information and changes about the
various software that was not available at printing time.
Multimedia Sound Card Easy Start
================================
There is an amendment to the above-mentioned documentation
(Page 5):
"Your sound includes 3 built-in AT-Bus CD-ROM Drive interface
connectors. This allows you to connect either a Aztech, Mitsumi,
Mitsumi, Panasonic or Sony AT-Bus CD-ROM drive to your sound
card."
Multimedia Sound Card User's Manual
===================================
There is an amendment to the above-mentioned documentation
(Page B-5).
The CD-ROM Drive Options for the configuration program have been
changed to the following:
- Mitsumi LU005
- Mitusmi FX001
- Panasonic CR56x
- Sony CDU33A
- Aztech CDA268
- Aztech IDE CDRom
- No CD-ROM
AT-BUS CD-ROM Drive Support
===========================
The bundled CD-ROM device drivers supports only the following drives:
Driver CD-ROM Model
------ ------------
CR56X.SYS - Panasonic CR562 & CR563
SGCDM.SYS - Mitsumi LU005S
MTMCDAE.SYS - Mitsumi FX001
SGCD268.SYS - Aztech CDA268-01A
For MotherBoards with IDE Drive Support
=======================================
The bundled CD-ROM device driver supports only Aztech IDE CD-ROM:
SGIDECD.SYS - Aztech CDA268-03I / CDA268-03ISE / CDA468-01I /CDA668-01I
CD-ROM Drives Support
=====================
The sound card supports the following CD-ROM drives:
Brand Models
----- ------
Panasonic - Model CR522/ 523/ 562 and 563
Mitsumi - Model LU005S/ FX001D
Sony - Model CDU31A/ 33A
Aztech - Model CDA268-01A
The bundled CD-ROM device drivers supports only the following drives:
Driver CD-ROM Model
------ ------------
CR56X.SYS - Panasonic CR562 & CR563
SGCDM.SYS - Mitsumi LU005S
SGCD268.SYS - Aztech CDA268-01A
Mitsumi CD-ROM Drivers
======================
The original Mitsumi CD-ROM device driver does not support the CD-ROM
Port Addresses (63xH & 65xH) used by your sound card. To overcome this
problem, a patch program (CDPATCH.EXE) is bundled together with the
utility disk which can be found under the {...\DRIVERS} directory after
installing the sound card software. This program will search and patch
the original Mitsumi CD-ROM drivers (i.e. MTMCDAE.SYS, MTMCDAS.SYS or
MTMCDE.SYS) in the {...\DRIVERS} directory automatically.
The program will prompt the user before it proceed to modify the driver,
and a message "... has been modified!" will be displayed upon successfully
modifying of the drivers. If the driver is not the original version or
it had been modified previously, the program will prompted "the file is
not modified!".
Therefore, Please run this program immediately after the installation of
the original Mitsumi CD-ROM driver (via CONFIG.EXE utility and SETUP.EXE)
before rebooting your system to load the Mitsumi driver.
Microsoft CD-ROM Extensions (MSCDEX.EXE)
========================================
The above file is needed for operation of CD-ROM drives under the DOS
environment. This file is only bundled with DOS version 6.x. Therefore,
if you are using DOS version 5, please contact your local Microsoft's
dealers for a copy of MSCDEX.EXE (for DOS version 5 usage).
Installation on Win3.1x Platform
================================
On Windows 3.1x Operating System, choose 'Run' from the 'File' menu. Insert
the Audio Installation Disk#1 into Drive A: (or Drive B:) and change the path
to A:\setup (or B:\setup). For more details, you can refer to the Easy Start
Manual.
Installation on Windows 95 Platform
===================================
Start up Windows 95 Operating System. Choose 'Run' from the 'Start' menu and
insert the Audio Installation Disk#1 into Drive A: (or Drive B:) and change
the path to 'A:\setup.exe' (or B:\setup.exe) and click OK to install the
audio drivers as well as the application software.
Upgrading from Win3.x to Win95 platform
=======================================
If you have set up your audio card on a Win3.x platform and want to upgrade
to Windows 95, remember to remove the audio drivers by doing a deinstallation
first. For more details, you can refer to the Appendix section in the User's
Manual.
Latest Windows NT and OS/2 Azt2316/R Audio Drivers
==================================================
For the latest Windows NT and OS/2 audio drivers, please download from
our Aztech BBS or at our internet site.
*************************************************************
* In case you encounter any problem with our products, *
* please quote the following model(s) when calling our *
* Technical Support: *
* P16(WH)-A/-AP/AD Sound Card *
*************************************************************
------- The End ---------
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.