PCNFS.TXT Driver File Contents (lan-driver_all-os.zip)

*****************************************************************************
*                                                                           *
*                     32-Bit PCI Fast Ethernet Adapter                      *
*                                                                           *
*                       NDIS/2 Driver for SUN PC-NFS                        *
*                                                                           *
*****************************************************************************

The driver named RTSND contained in the directory \NDIS2 conform to the
Network Driver Interface Specification (NDIS) defined by Microsoft/3Com.

NDIS/2 Driver Installation on SUN PC-NFS
========================================
 1. Edit the CONFIG.SYS file to include the following command line, and
    reboot the PC:
           Device=c:\dos\ansi.sys

 2. Insert the PC-NFS Installation diskette into the PC's floppy drive.
    Type the following from DOS and press <Enter> to bring up the PC-NFS
    installation screen:

           INSTALL      <Enter>

 3. Follow screen prompts to configure your screen display. For example, press
    <M> to choose mono display, or press <C> to choose color display, or press
    <ESC> to cancel the installation.

 4. When the "Install the Basic PC-NFS files" window appears on screen, select
    "Install Full PC-NFS" from the choice list.

 5. "Specify the target PC-NFS installation directory," by typing the
    appropriate path in the field provided. For example, C:\NFS. Then press
    <Enter> to continue.

 6. Carefully read and respond to each prompt that appears on screen,
    indicating the suitable selections for your system.

 7. When you reach the prompt that reads,
    "Configure an Ethernet network connection,"
    choose "Ethernet" from the choice list. Then press <Enter> to confirm your
    choice.

 8. Choose the network adapter you will use. Select "NDIS" from the list shown
    onscreen.  Then press <Enter> to confirm your choice.

 9. Follow screen instructions to complete the process. You will be prompted
    to insert some PC-NFS distribution diskettes. And during the process,
    files from the diskettes will be copied into your hard disk drive.

10. When prompted to update your AUTOEXEC.BAT and CONFIG.SYS files, press "Y".

11. Your system will prompt you when the installation process is complete.
    It will display the following message,

        "PC-NFS installation is complete."

12. The system will create two subdirectories in the destination drive,
    namely, \LANMAN and \NFS.

13. Create the NETWORK.BAT, DRIVES.BAT and HOSTS files.  Specify the PC name,
    IP address, server name and server IP address in these files.  See the
    section on Sample Configuration Files for examples.

14. Copy the NETWORK.BAT, DRIVES.BAT and HOSTS files into the \NFS directory
    of your server.

15. Copy the RTSND.DOS file from the \NDIS2\DOS of your driver diskette to
    the newly created subdirectory (\LANMAN) on your destination drive.

16. Edit the CONFIG.SYS file using a text editor. Add the following command
    line before the NFS_NDIS driver specification:

           DEVICE=C:\LANMAN\RTSND.DOS

17. Edit the PROTOCOL.INI file in the \LANMAN directory, replacing the
    following:

    a. Replace the section name [your-mac-module] with [RTSND_NIF]
    b. Replace the command line "drivername = YOURMAC$" with
       "drivername = RTSND$"
    c. Replace the command line "bindings = YOUR-MAC-MODULE"
       with "bindings = RTSND_NIF"
    d. Assign the media type and line speed as used in sample
       PROTOCOL.INI file.

18. Reboot your computer. Then start the application you need.
    For example:

    a. Run NFSCONF.EXE to configure the system, such as
       mounting a virtual drive E:
    b. Run TELNET.EXE to do terminal emulation


Sample Configuration Files
--------------------------
 1. NETWORK.BAT

    REM stc* is a sample PC-NFS workstation name
    REM test1 is a sample PC-NFS server address
    NET START RDR stc*
    NET PCNFSD test1
    NET NAME stc*

 2. DRIVES.BAT

    REM specify connections to remote directory
    NET USE l:test1:/usr2/down
    NET USE k:test1:/mnt

 3. HOSTS

    REM specify gateway address
    192.72.24.201 <gateway # updated>
    REM specify workstation's IP address
    192.72.24.102 stc
    REM specify server's IP address
    192.72.24.202 test1

 4. CONFIG.SYS

    Device=c:\dos\himem.sys
    shell=c:\command.com /P /E:526
    dos=high, UMB
    rem ----pcnfs install
    Device=c:\dos\ansi.sys
    DEVICE=C:\NFS\PCNFS.SYS  /m
    DEVICE=C:\NFS\SOCKDRV.SYS
    REM Specify PROTOCOL.INI directory
    DEVICE=C:\LANMAN\PROTMAN.SYS /i:C:\LANMAN
    REM  NDIS driver name
    device=C:\LANMAN\RTSND.DOS
    DEVICE=C:\LANMAN\NFS-NDIS.SYS
    FILES=50
    BUFFERS=50
    LASTDRIVE=v
    STACKS=9,256

 5. PROTOCOL.INI file at the \LANMAN directory

    [protocol manager]
       drivername = PROTMAN$
    [RTSND_NIF]
       drivername = RTSND$
    [NFS-NDIS]
       drivername = NFSLINK$
       bindings = RTSND_NIF

 6. AUTOEXEC.BAT
    ...
    SET TZ=PST8
    SET path=C:\;C:\NFS;C:\LANMAN
    SET NFSDRIVE=D
    REM Add the following line to bind NDIS driver
    C:lanman\netbind
    PRT *
    REM Execute application you need, e.g. NFSRUN
    NFSNET INIT
    NFSRUN

----
All trademarks or brand names mentioned are properties
of their respective companies.


Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web1, load: 1.20