LANSVR.TXT Driver File Contents (lan-driver_all-os.zip)

*****************************************************************************
*                                                                           *
*                     32-Bit PCI Fast Ethernet Adapter                      *
*                                                                           *
*                       NDIS/2 Driver for LAN Server                        *
*                                                                           *
*****************************************************************************

The driver named RTSND contained in the directory \NDIS2 conform to the
Network Driver Interface Specification (NDIS) defined by Microsoft/3Com.

Content of the file:
====================
        A) DOS LAN Requester Installation for LSP V1.30 to V1.37
        B) LAN Server 4.0 DOS Client Installation
        C) OS/2 LAN Server 3.0 Installation
        D) OS/2 LAN Server 4.0 Installation
        E) OS/2 LAN Server 4.0 Installation (Multiple LAN Adapters)


A) DOS LAN Requester Installation for LSP V1.30 to V1.37
   ======================================================
   1. Insert the IBM LAN Support Program (LSP) Version 1.30 (or 1.31 to 1.37)
      Diskette into your floppy drive (drive A: or B:).

   2. Type the following at your DOS prompt and press <Enter>:

      A:>dxmaid

   3. The screen will display the IBM logo. Press <Enter> twice until
      "Environment Information" appears onscreen.

   4. Respond to the screen prompts, specifying the following values for each
      field:

        Use the <Space Bar> to toggle between choices:
        Configuration for this computer?          Yes
        Use existing configuration information?   Yes
        Do you have adapter option diskettes?     Yes
        Are you configuring for two adapters?     No
        Do you need 802.2 interface support?      No

        Type changes as needed to the drive and directory information below:

        Source for LSP                           A:\
        Target for new configuration             C:\lsp

   5. Make sure that the values given above are correct.  Press <Enter> to
      store your choices.

   6. Insert the Driver Diskette in your source drive.  Specify the path and
      press <Enter> to proceed.  Examples:

        A:\NDIS2\DOS or B:\NDIS2\DOS

   7. Upon pressing <Enter> the necessary drives from the Driver Diskette are
      copied onto you target directory in the hard disk.

   8. Follow screen instructions to complete the process. Simply pressing
      <Enter> for each screen display will select the default options.  Press
      <Enter> three times, until you reach the display prompting you to insert
      the LSP diskette.

   9. Insert the LSP diskette as prompted. Press <Enter> to acknowledge
      completion of the action.

  10. A screen showing the current configuration detected will be displayed.
      It should show the PCI Fast Ethernet Adapter and the protocols
      already selected (i.e., "IBM IEEE 802.2" and "IBM OS/2 NETBIOS").

  11. Press <F4> to save the new configuration. This completes the LSP
      installation.

      ************************************************************
      *    NOTE:                                                 *
      *                                                          *
      *    You should have defined in your CONFIG.SYS a          *
      *    minimum of 20 files, i.e., FILES=20, to run the       *
      *    software properly. Change the FILES line using        *
      *    a text editor if needed.                              *
      *                                                          *
      *    If installing LSP for the first time, you should      *
      *    complete the installation by typing install and       *
      *    following the instructions on the screen.             *
      ************************************************************

  12. Use a text editor to edit the CONFIG.SYS file.  Specify at least 20
      files in the FILES= line. Modify it to the following:

        FILES=20

  13. Save the configuration and reset your computer.

  14. Insert the DOS LAN Requester Install Diskette into your floppy drive.

  15. Type the following and press <Enter>:

        INSTALL <Enter>

  16. The IBM logo will again appear on the screen.  Press <Enter> to move on
      to the next screen.

  17. Follow screen instructions, pressing <Enter> to move from screen-to-
      screen until you are prompted to indicate the pathname of the DOS LAN
      Requester directory.

        TIP: After the IBM logo appears on the screen,
             press <Enter> twice to reach this screen.

  18. Specify the pathname for the DOS LAN Requester directory (C:\DOSLAN is
      the default). Then press <Enter> to continue.

  19. The program will ask you for the services that you require.

  20. Highlight the appropriate option. Select either "Send messages" or
      "Send, View, Edit, and Log message" option.

        TIP: Normally, second option "Send, View, Edit
             and Log message" is selected.

  21. Specify the PC's ID and domain ID.  The domain ID is the domain server
      ID; it should be the same for all workstations on the network.

  22. Follow screen prompts to complete the installation.



B) LAN Server 4.0 DOS Client Installation
   =======================================
   1. Under the DOS environment, change the directory to the LAN Server DOS
      Client subdirectory; that is, enter the following command

        CD \NET

      Note: \NET is the default directory name of the LAN Server 4.0 DOS
            Client.
      Note: Before installing the LAN driver, you should install the IBM LAN
            Server DOS Client first.

   2. Type INSTALL and press <Enter> to enter the DOS LAN installation program.

   3. When the "Install for DOS LAN Services" screen appears, highlight
      "the listed options are correct" choice and press <Enter>.

   4. On the second screen, you will see the following information:

        Machine ID, User name, Domain name, ... and Network card information.

      Highlight the "Network card: No network card was selected" choice and
      press <Enter>.

   5. Select the first choice from the following two selections

        "Add driver for network card",
        "Driver configuration is correct".

   6. Select "Network card not shown in list below ..." from a listing of
      network adapters on the next screen.

   7. Insert the PCI Fast Ethernet driver diskette into drive A: and
      specify the path of driver installation file (OEMSETUP.INF) by typing
      A:\NDIS2\DOS and press <Enter>.


   8. Highlight "32-Bit PCI Fast Ethernet Adapter" and press <Enter>.

   9. If necessary, choose "Edit settings for network card driver", otherwise
      choose "Driver configuration is correct".

      Note: Please see NDIS.TXT for the parameter settings.

  10. Highlight "The listed options are correct" and press <Enter> on the next
      screen.

  11. Then, the Installation Program will ask you to insert the DOS LAN
      Services Disk 1. Be careful, do not follow the screen instruction here,
      that is, you should not insert the DOS LAN Services Disk.
      All you have to do is press <Enter> and wait for installation to complete.

  12. Remove the diskette from driver A: and press <Enter> to restart the
      machine.


C) OS/2 LAN Server 3.0 Installation
   =================================
   1. Copy RTSND.OS2 and RTSND.NIF files from your Driver diskette
      (A:\NDIS2\OS2) to C:\IBMCOM\MACS.

   2. Click the OS/2 LAN Service icon.

   3. Select "Installation and configuration." The IBM logo should
      appear on the screen.

   4. Click <OK>.

   5. Select <Advance> and press <Enter>.

   6. Select "Install or Configure this Workstation."

   7. Select server type, adding a server or domain controller.
     The "install or remove" selections should appear.

   8. Select "Configure a component."

   9. Click the "Configure" button.

  10. Select "Configure workstation."

  11. Select "32-Bit PCI Fast Ethernet Adapter" when prompted to identify your
      Network Adapter, Then click the <Add> button.

  12. Select "802.2" from the list and click the <Add> button.

  13. Select IBM NETBIOS from the list and click the <Add> button.

  14. Select <OK> to confirm all selections.

  15. Follow screen instructions to complete the process, selecting <OK> to
      accept default selections.

  16. Continue pressing <OK> until your screen prompts you to backup the old
      CONFIG.SYS and AUTOEXEC.BAT and create a new CONFIG.SYS and AUTOEXEC.BAT.
      Also select <OK> to confirm this.

  17. Installation is complete now. Reset your PC by turning it off and on.



D) OS/2 LAN Server 4.0 Installation
   =================================
   1. In OS2 desktop, click the MPTS (Multi-Protocol Transport Service)
      icon.  The IBM logo should appear on screen.

   2. Click the <OK> button.

   3. Click the <Configure> button.

   4. Select the "LAN adapters and protocols" item, then click the <Configure>
      button.

   5. Click the <Other adapters...> button.

   6. Insert the PCI Fast Ethernet Adapter driver diskette into
      a specified drive (A: or B:), then enter the driver path like

         A:\NDIS2\OS2  or B:\NDIS2\OS2

      and click the <OK> button

   7. Select "32-Bit PCI Fast Ethernet Adapter" from the Network Adapters list
      when prompted to identify you Network Adapter. Then click the <Add>
      button.

   8. Select "IBM 802.2" from the Protocols list and click the <Add> button.

   9. Select "IBM OS2 NETBIOS" from the Protocols list and click the <Add>
      button.

  10. Select "IBM Netware Requester Support" from the Protocols list and
      click the <Add> button if you need to log onto the NETWARE server.

  11. Select <OK> to confirm all selections.

  12. Click the <Close> button in the Configure window.

  13. Click the <Exit> button in the MPTS window.

  14. Click the <Exit> button, then your screen will prompt you to backup
      the old CONFIG.SYS and AUTOEXEC.BAT, and create a new CONFIG.SYS
      and AUTOEXEC.BAT. Also select <OK> to confirm this.

  15. Installation is complete now. Reset your PC by turning it off and on.



E) OS/2 LAN Server 4.0 Installation (Multiple LAN Adapters)
   =========================================================
   For multiple adapters installation, you must do as follows:
       a. configure <LAN Services>
       b. configure <MPTS>

   a. Configure <LAN Services>
   ---------------------------
   1. From the OS/2 desktop, click <LAN Services>.

   2. In the LAN Services windows, click
      <OS/2 LAN Services Installation/Configuration>.

   3. click <OK> when the IBM logo appears.

   4. In the "Basic or Advanced Installation/Configuration" dialog box,
      click <Advanced>.

   5. Select "Install or configure this workstation" in the "Installation Tasks"
      dialog box, and click <OK>.

   6. Select Server Type (like, Domain controller) then click <OK>.

   7. Select "Configure a component" from the "Installation and Configuration"
      dialog box, and click <OK>.

   8. Select "LAN Services Adapters" from the "Configure" dialog box, and click
      <Configure...>.

   9. Select the LAN adapters to be used by LAN Services (for 2 adapters,
      select Adapter 0, Adapter 1 ) and click <OK>.

  10. Assign the NETBIOS Resources like Sessions, Commands & Names (you can use
      the default value) and click <OK> for different adapters.

  11. Click <OK> from the "Configure" dialog box.

  12. Select "Apply the changes" and click <OK> from the "Installation and
      Configuration" dialog box.

  13. Follow screen instructions to complete the installation.

  14. Shut down and reboot the machine.


   b. Configure <MPTS>
   -------------------
     If you have more than one adapter, you need to configure each of them
     for different adapters by clicking <Edit> in the "Configure" windows.
     You can desinate a adapter's etherid(ex. @0010B5123456) in "Network
     Adapter Address" or BusNo & DeviceNo in "Bus Number" and "Device Number".


----
All trademarks or brand names mentioned are properties
of their respective companies.


Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web1, load: 0.98