LANMAN.TXT Driver File Contents (lan-driver_all-os.zip)

*****************************************************************************
*                                                                           *
*                     32-Bit PCI Fast Ethernet Adapter                      *
*                                                                           *
*                 NDIS/2 Driver for Microsoft LAN MANAGER                   *
*                                                                           *
*****************************************************************************

The driver named RTSND in the MSLANMAN.DOS and MSLANMAN.OS2 directories
conforms to the Network Driver Interface Specification (NDIS) 2.0.1
as defined by Microsoft/3Com.

NDIS/2 Driver Installation on LAN Manager v2.0
==============================================
 1. Type "Setup" in the LAN Manager directory and press Enter.

 2. Choose "Import Network Drivers..." in the "Action" field.
    Press <Enter> to continue.

 3. Insert your Driver Diskette into either drive A: or B:.
    Then press <Enter> to see the list of Imported Network
    Drivers appear on the screen.

 4. Press the <Space> Bar to select the appropriate Network Adapter
    (i.e.  "32-Bit PCI Fast Ethernet Adapter"),
    then press <Enter> to confirm your choice.

 5. Follow screen instructions to complete the process, until the Network
    Driver appears on the screen.

 6. Identify your Network Adapter if asked. For example, select

         "32-Bit PCI Fast Ethernet Adapter"

 7. Select the <Add driver> and the <Add protocol> options.
    Then select <OK> to confirm your choices. The Workstation's
    primary parameters should appear on the screen.

 8. Respond to all prompts issued on the screen to complete the process.
    Select <OK> to confirm a choice.

 9. Save all selections. Choose "Save" from the "Action Menu"

10. Press <F3> to exit.



NDIS/2 Driver Installation on LAN Manager v2.1
==============================================
 1. Type "lmsetup" in the LAN Manager directory and press <Enter>.
    The Microsoft LAN Manager Setup screen should appear.

 2. Choose "Network Drivers..." in the "Configuration" field. Press
    <Enter> to confirm your choice.

 3. Choose <Add New Configs> and press <Enter> to display a list of
    Network Adapter Drivers.

 4. Choose <Other Driver> and press <Enter>.

 5. Insert the Driver Diskette into drive A: or B: of your PC.
    Indicate the drive location of the diskette and select <OK>
    to proceed.

 6. Select the appropriate Network Adapter Driver from the list.
    For example, select

         "32-Bit PCI Fast Ethernet Adapter"

    Select <OK> to confirm your choice.

 7. Select an appropriate protocol. Use the <Space> bar to highlight
    your choice.

 8. Select <OK> to confirm your choice.  A Configuration Complete message
    should appear on the screen.

 9. Save the configuration. Select <Save>.

10. Press <F3> to exit.



NDIS/2 Driver Installation on LAN Manager v2.2
==============================================
 1. Type setup in the LAN Manager directory and press <Enter>.
    The Microsoft LAN Manager Setup screen should appear.

 2. Choose "Network Drivers" from the "Configuration" field.
    Press <Enter> to confirm your choice.

 3. Choose <Add New Config> and press <Enter> to display a list
    of Network Adapter Drivers.

 4. Choose <Other Driver> and press <Enter>.

 5. Insert the Driver Diskette into drive A: or B: of your PC.
    Indicate the drive location of the diskette and select <OK>
    to proceed.

 6. Select the appropriate Network Adapter Driver from the list.
    For example, select

         "32-Bit PCI Fast Ethernet Adapter"

    Select <OK> to confirm your choice.

 7. Select an appropriate protocol. Use the <Space bar> to highlight your
    choice. If you have chosen the TCP/IP protocol, you will be prompted to
    key-in the IP address, the subnet mask, and the default gateway (router).
    By the default, the workstation number of NetBios session is set to 6.
    Please consult Microsoft LAN Manager Installation Manual for more details,
    or check the online help.

 8. Select <OK> to confirm your choice.  A Configuration Complete messages
    should appear on the screen.

 9. Save the configuration. Select <Save>.

10. Press <F3> to exit.



If you are installing the LAN Manager for the first time, you will be prompted
to key-in the default user name and domain of the workstation, as well as to
answer the questions concerning Windows environment and memory management. Just
follow the instructions on the screen.


Sample Configuration Files
==========================

LAN Manager 2.0

  CONFIG.SYS File

      LASTDRIVE=Z
      BUFFERS = 35
      FILES = 35
      SHELL=C:\DOS50\COMMAND.COM C:\DOS50 /p /E:1024
      DEVICE=C:\HIMEM.SYS
      DEVICE=C:\DOS\SETVER.EXE
      DOS=HIGH,UMB
      DEVICE=C:\LANMAN.DOS\DRIVERS\PROTMAN\PROTMAN.DOS /i:C:\LANMAN.DOS
      DEVICE=C:\LANMAN.DOS\DRIVERS\ETHERNET\RTL8139\RTSND.DOS
      DEVICE=C:\LANMAN.DOS\DRIVERS\PROTOCOL\NETBEUI\NETBEUI.DOS

  PROTOCOL.INI File

      [PROTOCOL MANAGER]
       DRIVERNAME = PROTMAN$
      [NETBEUI_XIF]
       Drivername = netbeui$
       BINDINGS = "RTSND_NIF"
      [RTSND_NIF]
     ;----------------------------------------------------------------------
     ; Sample Protocol.ini file for NDIS/2 driver
     ;----------------------------------------------------------------------
       DriverName = RTSND$
     ;----------------------------------------------------------------------
     ; End of this sample file

  AUTOEXEC.BAT File

        @echo off
        PROMPT $P$G
        PATH=c:\PE2;C:\DOS;C:\NC;
        REM ====== LANMAN 2.0 === DO NOT MODIFY BETWEEN THESE LINES
        SET PATH=C:\LANMAN.DOS\NETPROG;%PATH%
        C:\LANMAN.DOS\DRIVERS\PROTMAN\NETBIND
        NET START WORKSTATION
        REM ====== LANMAN 2.0 === DO NOT MODIFY BETWEEN THESE LINES

LAN Manager 2.1 or LAN Manager 2.2

  CONFIG.SYS File

        LASTDRIVE=Z
        BUFFERS = 35
        FILES = 35
        SHELL=C:\DOS\COMMAND.COM C:\DOS /p /E:1024
        DEVICE=C:\HIMEM.SYS
        REM DEVICE=C:\LANMAN.DOS\DRIVERS\DOSUTILS\EMM386.EXE NoEMS ;;delete this
        DEVICE=C:\DOS62\SETVER.EXE                                 ;;line
        DOS=HIGH,UMB
        DEVICE=C:\LANMAN.DOS\DRIVERS\PROTMAN\PROTMAN.DOS /i:C:\LANMAN.DOS
        DEVICE=C:\LANMAN.DOS\DRIVERS\ETHERNET\RTL8139\RTSND.DOS

  PROTOCOL.INI File

        [PROTMAN]
         DRIVERNAME = PROTMAN$
         DYNAMIC = YES
         PRIORITY = NETBEUI
        [NETBEUI_XIF]
         Drivername = netbeui$
         SESSIONS = 6
         NCBS = 12
         BINDINGS = "RTSND_NIF"
         LANABASE = 0

        [RTSND_NIF]
        ;----------------------------------------------------------------------
        ; Sample Protocol.ini file for NDIS/2 driver
        ;----------------------------------------------------------------------
          DriverName = RTSND$
        ;----------------------------------------------------------------------
        ; End of this sample file

  AUTOEXEC.BAT File

        @echo off
        PROMPT $P$G
        PATH=c:\PE2;C:\DOS;C:\NC;
        @REM ====== LANMAN 2.1 === DO NOT MODIFY BETWEEN THESE LINES
        @REM=== LANMAN 2.1 ===
        SET PATH=C:\LANMAN.DOS\NETPROG;%PATH%
        NET START WORKSTATION
        LOAD NETBEUI
        @REM ====== LANMAN 2.1 === DO NOT MODIFY BETWEEN THESE LINES
        @REM === LANMAN 2.1 ===

-----
All trademarks or brand names mentioned are properties
of their respective companies.


Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web1, load: 0.86