V2.0 Readme.txt Driver File Contents (BCA2000-driver-setup-


New Features:

- greatly improved stability 

- drastic reduction in system load

- new switchable USB1.1 mode (for USB2.0 hosts only) with full support for ASIO/WDM 
  ideal for applications where system load is critical. 

- new WDM settings page in BCA2000 Control Panel 
  allows user to select recommended bit depth, sample rate and number of output channels. 

- new INFO page in BCA2000 Control Panel 
  Displays error messages for simplified diagnosis of system faults
  allows for fast and effective troubleshooting 

- greatly simplified driver installation process - only one set-up.exe file is needed

Absolute minimum system requirements

Windows® XP with Service Pack 2 (or SP1 + MS Hotfix KB822603) 
Minimum 256 MB RAM (recommended 512 MB) 
CPU 1.2GHz or faster 

please close all applications before starting the set-up.exe 
This includes any virus scanners. 
We recommend installing directly after booting Windows®. 

Unzip the set-up.exe file and double click the icon to start. 
follow the instructions on the splash-screen and the Windows® device manager. 


1. the installation routine is repeated three times (different driver components) 
There is no need to interrupt or restart the computer - simply follow the install wizard. 

2. If you are prompted to search the internet for drivers, please select "no, not this time" (third option) 

3. For each "Windows Logo Test" message, click "continue installation". 

4. The hardware installation is "offline" - during the installation you will be prompted to switch the BCA2000 off and later on again. 
The installation will not procede unless you follow these prompts. 

5. The entire installation is repeated on selection of "forced" USB1.1 Mode

New Forced USB1.1 Mode (Full Speed) 

This mode is available on all modern USB2.0 host computers. Older hosts will support the "true" USB1.1 mode only. 

You can select this mode on the USB-INFO page in the BCA2000 control panel. 
It is necessary to restart the BCA2000 to force USB1.1. 
The first time you do this, the device will re-install automatically. 
There is no need to re-run the set-up.exe
When switching between modes, please be absolutely sure that there are no other applications open during the installation. 

Some functions are not available in USB1.1 mode (eg. SMUX or 96kHz operation) 
The associated buttons are deactivated in the control panel.

New WDM-Page:

Please note that all settings on this page affect only the WDM driver (in both USB Modes) 

These settings are "recommendations" for the Windows® Operating System. 
These settings may be overriden by Windows® or by the host audio software. 


Your Behringer-Team
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web3, load: 1.20