Arppe2600va v2.2 MIDI Controller Assignments Any CC# assignment can be overridden by using the MIDI LEARN function. Just click the MIDI LEARN button, move a control on the softsynth, then move a knob or slider on your hardware controller. Control CC# Type Control CC# Type --------------------- --- --------------- ------------------------ --- --------------- Preamp Gain 23 knob VCF > Ring Mod 109 Range 9 3-position switch VCF > VCO1 Square 110 VCO1 Freq 14 VCF > VCO2 Pulse 111 VCO1 Finetune 15 VCF > VCO3 Saw 112 VCO1 Sync > VCO2 96 on/off toggle VCF > Noise Gen 113 VCO2 Freq 16 VCF > ADSR 114 VCO2 Finetine 17 VCF > VCO2 Sine 115 VCO2 Pulsewidth 18 AR Attack 116 VCO3 Freq 19 AR Release 117 VCO3 Finetine 20 AR > Kbd Trig or S/H Gate 83 switch VCO3 Pulsewidth 21 Manual Start 22 on/off toggle VCF Freq (Cutoff) 74 VCA > VCF 85 VCF Finetune 3 VCA > Ring Mod 86 VCF Resonance 71 VCA > AR 87 VCF Filter Color 8 VCA > ADSR 88 ADSR Attack 73 Mixer > VCF 118 ADSR Decay 75 Mixer > VCA 119 ADSR Sustain 70 Kbd CV Out 13 on/off toggle ADSR Release 72 Pitch Bend Range 12 knob Global Output 7 Trigger Mode 89 switch FX Type 84 LFO Speed 76 FX Time 90 knob LFO Delay 77 FX Damp 95 knob LFO Vibrato Depth 1 Pan 10 LFO Key Trig 97 on/off toggle Reverb Left 91 Noise Gen Color 78 Reverb Right 92 Noise Gen Level 79 Envelope Follower 25 Volt Proc Mix 1 > 2 120 Ring Mod VCO1 Saw 26 Volt Proc Mix 3 > 4 121 Ring Mod VCO2 Sine 27 Volt Proc Mix 5 > 6 122 VCO1 Audio/LFO 80 switch Volt Proc Mix 7 > 8 123 VCO1 > S/H Out 28 Volt Proc Link 3 > 4 124 on/off toggle VCO1 > ADSR 29 Volt Proc Link 5 > 6 125 on/off toggle VCO1 > VCO2 Sine 30 Volt Proc Link 7 > 8 126 on/off toggle VCO2 Audio/LFO 81 switch S/H Level 93 VCO2 > S/H Out 102 S/H Rate 94 VCO2 > ADSR 103 Repeat Type 24 3-position switch VCO2 > VCO1 Square 104 Repeat Rate 11 knob VCO2 > Noise Gen 105 2 Octaves 31 3-position switch VCO3 Audio/LFO 82 switch Portamento 5 VCO3 > Noise Gen 106 VCO3 > ADSR 107 VCO3 > VCO2 Sine 108Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.