Choose the correct ROM file.
# A360NTSC128.ROM for WinFasst A360 NTSC 128MB product
# A360NTSC256.ROM for WinFasst A360 NTSC 256MB product
# A360PAL128.ROM for WinFasst A360 PAL 128MB product
# A360PAL256.ROM for WinFasst A360 PAL 256MB product
Please follow the steps below to update the BIOS.
(Note: Under Windows NT, the BIOS is only allowed to be upgraded by this way.)
1. Reboot into DOS or Command Prompt Only.
2. Change to the directory which the WFFLASH.exe, Dos4gw.exe and the BIOS
binary file locate in.
For example, change to the folder you downloaded C:\A360_BIOS>
3. Type the following command:
WFFLASH.EXE [FILENAME] ([Filename] means the file name of BIOS binary
file, usually XXX.ROM)
4. A dialog box will appear on the screen, asking you if you want to update
the BIOS. Type Y to update the BIOS. Type N if you don't want to update
the BIOS.
5. The screen will disappear for 5 ~ 10 seconds during the updating process.
Do not take any action before the updating is finished. Otherwise you may
encounter severe problems and need to have the card sent for repair.
6. After the updating is completed, you must reboot your computer.
Note: The updating must be done under the DOS prompt. Please start your system
with your startup disk to enter the DOS environment.
(The folder name and the file name may become different names, like A360_~1,
because of the long character length. It's recommended to use "dir" command
to see the exact name to type.)
Under Windows XP/2K/ME/9x, you can easily upgrade the BIOS of your display
adapter with VGA BIOS Flash Utility of WinFox 2.0 (you can download WinFox 2.0
on Leadtek website) in Windows.(If you want to upgrade the BIOS in Windows, please
refer to VGA BIOS Flash Utility section of your physical manual).
Or you can follow the steps below in DOS as well.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.