>>>>>> M800lmr Rev.1.1 <<<<<< Relesae bios file name :2k0201s.rom check sum :059Eh release date :2000/02/01 ECN :SNG-2K0011 1.First released. Relesae bios file name :2k0210s.rom check sum :491ch release date :2000/02/10 ECN :SNG-2K0014 1.Fixed system can't boot when both enable "USB for DOS" and "Chipaway AntiVirus". 2.Fixed USB port1 can't wakeup at legacy DOS mode. Relesae bios file name :2k0221s.rom check sum :6825h release date :2000/02/21 ECN :SNG-2K0018 1. Added "Beep" function during POST. 2. Fixed NT40 can't install completely. 3. Added "Ultra DMA Support" item in CMOS Setup Menu. 4. Fixed CPU temperature had improper value when enetring "Hardware Monitor" item in CMOS Setup Menu. Relesae bios file name :2k0303s.rom check sum :4E4Dh release date :2000/03/03 ECN :SNG-2K0021 1. Fixed that when turning on the AC Power, causing the system directly power on the machine. Relesae bios file name :2k0316s.rom check sum :57ABh release date :2000/03/16 ECN :SNG-2K0028 1. Auto detect ALPS USB keyboard. 2. Fixed character repeat until keyboard buffer full when system wakes up from DOS mode by USB keyboard. 3. Added ATMEL 49F002T 5V 256K flash & 5V SST39SF020 flash parts. Relesae bios file name :2k0327s.rom check sum :5CBAh release date :2000/03/31 ECN :SNG-2K0031 1. MAXTOR 36GB HDD support. 2. Supporting the following Flash parts: A) ATMEL AT49F002NT B) PMC PM29F002T C) SST 39SF020 D) ASD AE49F2008 Relesae bios file name :2k0412s.rom check sum :D733h release date :2000/04/14 ECN :SNG-2K0040 1. Enabled Silent Boot function. 2. To support AMDK7 Thunder Bird CPU. 3. Adjusting DIMM1's memory buffer strength. 4. Added BIOSLOCK Function 5. To change Suspend LED behavior: ON : Working Blink: Suspend Relesae bios file name :2k0523s.rom check sum :1219h release date :2000/06/02 ECN :SNG-2K0053 1. Filling PCCHIPS SVID/VID to AMD756. 2. Don't stop CPU FAN when entering suspend mode. 3. Supporting EON En29f002T flash ROM. 4. Fixed that PS2 devices can't work properly when entering suspend mode. 5. Correcting BIOSLOCK function.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.