; Internal Version 1.06b [Identification] OptionType = NetAdapter [PlatformsSupported] PCI "Jazz-Internal Bus" [LanguagesSupported] ENG [FileConstants] UtilityInf = "UTILITY.INF" ParamInf = "NCPARAM.INF" subroutineinf = "SUBROUTN.INF" NwSubsInf = "NWSUBS.INF" Exit_Code = 0 NetEventDLL = "%SystemRoot%\System32\netevent.dll" IoLogMsgDLL = "%SystemRoot%\System32\IoLogMsg.dll" Manufacturer = "Compaq" ClientProvider = "Novell" ProductMajorVersion = "1" ProductMinorVersion = "0" ProductVersion = $(ProductMajorVersion)"."$(ProductMinorVersion) DriverName = "OdiLoad" OdiModules = "ODI_Modules" NE3200_1BYTE = 511034 NetRuleHardwareType = "nwDriver nwAdapter" NetRuleHardwareBindForm = " yes yes container" ProductKeyName = $(!NTN_SoftwareBase)"\"$(ClientProvider)"\"$(DriverName)"\CurrentVersion" [GeneralConstants] from = "" to = "" ExitCodeOk = 0 ExitCodeCancel = 1 ExitCodeFatal = 2 KeyNull = "" MAXIMUM_ALLOWED = 33554432 RegistryErrorIndex = NO_ERROR KeyProduct = "" KeyParameters = "" TRUE = 1 FALSE = 0 NoTitle = 0 ExitState = "Active" OldVersionExisted = $(FALSE) DriverPath = $(!STF_NTPATH)\netware [ODIParameters] ODINodeAddress = "" ODIDriverAdditionalParms = {} ODICustomList = {} ODITokenRing = "" ODITokenRingSnap = "" ODISlotList = {} ODIDefaultSlot = "" [date] Now = {} ? $(!LIBHANDLE) GetSystemDate [Identify] read-syms Identification set Status = STATUS_SUCCESSFUL set Identifier = $(OptionType) set Media = #("Source Media Descriptions", 1, 1) Return $(Status) $(Identifier) $(Media) [ReturnOptions] read-syms ODIStrings$(!STF_LANGUAGE) set Status = STATUS_FAILED set OptionList = {} set OptionTextList = {} set LanguageList = ^(LanguagesSupported, 1) Ifcontains(i) $($0) in $(LanguageList) ifstr(i) $($1) == "" goto returnoptions endif set PlatformList = ^(PlatformsSupported, 1) Ifcontains(i) $($1) in $(PlatformList) goto returnoptions else set Status = STATUS_NOTSUPPORTED goto finish_ReturnOptions endif else set Status = STATUS_NOLANGUAGE goto finish_ReturnOptions endif returnoptions = + set OptionList = ^(Options, 1) set OptionTextList = {} ForListDo $(OptionList) set OptionTempString = " ODI "#($($),Title,1)$(AdapterForNetWare) set OptionTextList = >($(OptionTextList), $(OptionTempString)) EndForListDo set Status = STATUS_SUCCESSFUL finish_ReturnOptions = + Return $(Status) $(OptionList) $(OptionTextList) [InstallOption] set Option = $($1) set SrcDir = $($2) set AddCopy = $($3) set DoCopy = $($4) set DoConfig = $($5) set LanguageList = ^(LanguagesSupported, 1) Ifcontains(i) $($0) NOT-IN $(LanguageList) Return STATUS_NOLANGUAGE endif set-subst LF = "\n" read-syms GeneralConstants read-syms FileConstants read-syms ODIParameters read-syms DialogConstants$(!STF_LANGUAGE) read-syms ODIStrings$(!STF_LANGUAGE) ifstr(i) $(!NTN_Origination) == "NCPA" set Continue = "OK" endif read-syms FileConstants$(!STF_LANGUAGE) detect date set to = Begin set from = Begin set CommonStatus = STATUS_SUCCESSFUL EndWait Begin = + set CurrentInstallMode = "" Ifstr(i) $(!NTN_InstallMode) == deinstall set StartLabel = removeadapter goto skipmakingthelists else-Ifstr(i) $(!NTN_InstallMode) == Update set StartLabel = UpgradeSoftware set CurrentInstallMode = configure set DoCopy = YES set AddCopy = YES else-Ifstr(i) $(!NTN_InstallMode) == bind set StartLabel = bindingadapter goto skipmakingthelists else-Ifstr(i) $(!NTN_InstallMode) == configure set StartLabel = configureadapter set CurrentInstallMode = configure else set DoCopy = YES set AddCopy = YES set StartLabel = installadapter set OEM_ABANDON_OPTIONS = {} set OEM_ABANDON_SOFTWARE = FALSE set OEM_ABANDON_ON = TRUE endif set ParameterListNames = ^(DefaultParameterLists, 1) set ListNames = ^(ODIListNamesSection, 1) set ODIKeywordList = ^(ChoicesNamesList, 1) set ODITitleList = ^(ChoicesNamesList, 2) set MSParameterList = ^(ChoicesNamesList, 3) set DriverListNames = {} set ODINumberofDriverLists = 0 ForListDo ^($(Option),0 ) ifcontains(i) $($) IN $(ListNames) set DriverListNames = >($(DriverListNames), $($)) else-ifstr(i) $($) == "CUSTOM" set ODICustomList = #($(Option), Custom, 1) endif EndForListDo QueryListSize ODINumberofDriverLists $(DriverListNames) ForListDo $(DriverListNames) set $($)Keyword = #($(Option), $($), 1) ifstr $($($)Keyword) != "" set $($)Default = #($(Option), $($), 3) ifcontains(i) $($($)Keyword) IN $(ODIKeywordList) set $($)Title = *($(ODITitleList), ~($(ODIKeywordList), $($($)Keyword))) set ThisListName = #($(Option), $($), 2) set MSParameterName$(#) = *($(MSParameterList), ~($(ODIKeywordList), $($($)Keyword))) set FinalList = {} ifcontains(i) $(ThisListName) IN $(ParameterListNames) ifstr(i) #($(Option), $($), 4) == "ALL" set FinalList = ^($(ThisListName), 1) else set CountUpTo = #($(Option), $($), 5) ifstr(i) $(CountUpTo) == "END" set CountUpTo = $(MAXIMUM_ALLOWED) endif set StartNumber = #($(Option), $($), 4)) ForListDo ^($(ThisListName), 1) ifint $(#) >= $(StartNumber) ifint $(#) <= $(CountUpTo) set FinalList = >($(FinalList), $($)) endif endif EndForListDo endif else set $($)Title = #($(Option), $($), 2) set FinalList = #($(Option), $($), 4) endif else set $($)Title = #($(Option), $($), 2) set MSParameterName$(#) = "" set FinalList = #($(Option), $($), 4) endif set $($)List = $(FinalList) endif EndForListDo skipmakingthelists = + set ODILANDriverTitle = #($(Option), Title, 1) Split-String #($(Option), DriverName, 2) "." SplitFileNameList set ODILANDriverName = *($(SplitFileNameList), 1) set ODIMediaType = #($(Option), MediaType, 1) set ODICardType = #($(Option), CardType, 1) set ODICardId = #($(Option), CardId, 1) ifstr(i) $(ODICardType) == "PCI" set ODIVendor = #($(Option), Vendor, 1) endif ifstr(i) #($(Option), CanShareSlot, 1) == "YES" set SkipDescriptionCheck = "NO" else set SkipDescriptionCheck = "YES" endif ifstr(i) $(ODIMediaType) == "ETHERNET" set NdisMediaType = "1" else-ifstr(i) $(ODIMediaType) == "TOKEN-RING" set NdisMediaType = "2" else-ifstr(i) $(ODIMediaType) == "FDDI" set NdisMediaType = "4" else set NdisMediaType = "" endif set from = $(fatal) set to = $(fatal) goto $(StartLabel) installadapter = + install "Install-Option" goto adapteroptions configureadapter = + Ifstr $(KeyProduct) == $(KeyNull) OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) $(MAXIMUM_ALLOWED) KeyProduct Ifstr $(KeyProduct) == $(KeyNull) set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE goto fatalregistry Endif Endif Set AdapterNumber = "" Shell $(UtilityInf) FindService, $(KeyProduct) Ifint $($ShellCode) != $(!SHELL_CODE_OK) Goto ShellCodeError Endif Ifstr(i) $($R0) != NO_ERROR Goto fatalregistry endif set KeyParameters = $($R2) set ServiceAreaHandle = $($R1) Ifstr $(KeyParameters) == $(KeyNull) set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE goto fatalregistry endif set OldVersionExisted = $(TRUE) set ValueName = "" set ValueData = "" set ValueStr = "" set ValueList = {} GetRegValue $(KeyParameters) ODILoadName ODILoadName Set CardInstanceName = *($(ODILoadName),4) Ifstr $(CardInstanceName) == $(KeyNull) set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE goto fatalregistry endif set KeyToFind = $(!NTN_ServiceBase)"\ODILOAD\ODI_MODULES\"$(CardInstanceName) OpenRegKey $(!REG_H_LOCAL) "" $(KeyToFind) $(MAXIMUM_ALLOWED) DriverKey Ifstr $(DriverKey) == $(KeyNull) set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE goto fatalregistry Endif GetRegValue $(DriverKey) Parameters ParameterList set ParameterList = *($(ParameterList), 4) ForListDo $(ParameterList) set ThisParameterList = $($) Split-String $($) " " SplitList set KeyToSearchFor = *($(SplitList), 1) set ValueToUse = *($(SplitList), 3) set ValueFound = 0 ifstr(i) $(KeyToSearchFor) == "FRAME" set ValueFound = 1 QueryListSize SplitListSize $(SplitList) ifstr(i) *($(SplitList), 3) == "TOKEN-RING" set LastParameter = *($(SplitList), $(SplitListSize)) ifstr(i) $(LastParameter) == "MSB" set ODITokenRing = "MSB" else-ifstr(i) $(LastParameter) == "LSB" set ODITokenRing = "LSB" else set ODITokenRing = "MSB" endif else-ifstr(i) *($(SplitList), 3) == "TOKEN-RING_SNAP" set LastParameter = *($(SplitList), $(SplitListSize)) ifstr(i) $(LastParameter) == "MSB" set ODITokenRingSnap = "MSB" else-ifstr(i) $(LastParameter) == "LSB" set ODITokenRingSnap = "LSB" else set ODITokenRingSnap = "MSB" endif endif else-ifstr(i) $(KeyToSearchFor) == "NODE" set ODINodeAddress = $(ValueToUse) set ValueFound = 1 else-ifstr(i) $(KeyToSearchFor) == "SLOT" set ODIDefaultSlot = $(ValueToUse) set ValueFound = 1 else-ifstr(i) $(KeyToSearchFor) == "BUSNAME" set ValueFound = 1 else-ifstr(i) $(KeyToSearchFor) == "BUSTYPE" set ValueFound = 1 set BusInterfaceType = $(ValueToUse) else-ifstr(i) $(KeyToSearchFor) == "BUS" set ValueFound = 1 set BusNumber = $(ValueToUse) endif ForListDo $(DriverListNames) ifstr(i) $(KeyToSearchFor) == $($($)Keyword) set $($)Default = $(ValueToUse) set ValueFound = 1 ifcontains(i) $(ValueToUse) NOT-IN $($($)List) set $($)List = >($($($)List), $(ValueToUse)) endif endif EndForListDo ifint $(ValueFound) == 0 set FoundInCustom = 0 ForListDo $(ODICustomList) ifstr(i) $($) == $(ThisParameterList) set FoundInCustom = 1 endif EndForListDo ifint $(FoundInCustom) == 0 ifstr $(ODIDriverAdditionalParms) == {} set ODIDriverAdditionalParms = $(KeyToSearchFor)" "$(ValueToUse) else set ODIDriverAdditionalParms = >($(ODIDriverAdditionalParms), $(KeyToSearchFor)" "$(ValueToUse)) endif endif endif EndForListDo adaptersetup =+ goto adapteroptions adapteroptions = + set from = adapteroptions set NovellParameters = $(!NTN_SoftwareBase)"\"$(ClientProvider)"\Parameters" OpenRegKey $(!REG_H_LOCAL) "" $(NovellParameters) $(MAXIMUM_ALLOWED) KeyNovellParameters ifint $(RegLastError) == $(!REG_ERROR_SUCCESS) GetRegValue $(KeyNovellParameters) "NWLanguage" LanguageList ifint $(RegLastError) == $(!REG_ERROR_SUCCESS) set NLSDirName = *($(LanguageList), 4) LoadLibrary $(NetWareForWindowsNT) $(!STF_WINDOWSSYSPATH)"\nls\"$(NLSDirName)"\nwsetupr.dll" NwLibHandle SetHelpFile $(!STF_WINDOWSSYSPATH)"\nls\"$(NLSDirName)"\nwnthelp.hlp" $(!MinimumID) $(!MaximumID) else goto fatalregistry endif CloseRegKey $(KeyNovellParameters) else goto fatalregistry Endif dothedialog = + ifint $(ODINumberofDriverLists) == 0 ifstr(i) $(CurrentInstallMode) == configure read-syms NoParms$(!STF_LANGUAGE) ui start "WorkstationDLG" $(NwLibHandle) ifstr(i) $(DLGEVENT) == "CONTINUE" else-ifstr(i) $(DLGEVENT) == "EXIT" goto doadvancedsettings endif endif else read-syms LANDriverDlg$(!STF_LANGUAGE) set NotifyFields = {} set ComboListItemsIn = {} set ComboListItemsOut = {} ForListDo $(DriverListNames) set NotifyFields = >($(NotifyFields), "NO") set ComboListItemsIn = >($(ComboListItemsIn), $($)List) ifstr $($($)Value) == "" set $($)Value = $($($)Default) endif set ComboListItemsOut = >($(ComboListItemsOut), $($)Value) EndForListDo ui start "LANDriverParms" $(NwLibHandle) ifstr(i) $(DLGEVENT) == "CONTINUE" else-ifstr(i) $(DLGEVENT) == "BACK" set CommonStatus = STATUS_USERCANCEL ui pop 1 FreeLibrary $(NwLibHandle) goto end else-ifstr(i) $(DLGEVENT) == "EXIT" doadvancedsettings =+ read-syms AdvancedDialog$(!STF_LANGUAGE) set RadioIn = {} set ComboListItemsIn = {} set ComboListItemsOut = {} set ComboOut = $(ODIDefaultSlot) ifstr(i) $(ODIMediaType) == "TOKEN-RING" ifstr(i) $(ODISlotList) == {} set DlgTemplate = "DLG_ADVANCEDDRIVER3" else set ComboListItemsIn = { ODISlotList } set ComboListItemsOut = { ComboOut } set DlgTemplate = "DLG_ADVANCEDDRIVER1" endif ifstr(i) $(ODITokenRing) == "LSB" set RadioIn = { 2 } else set RadioIn = { 1 } endif ifstr(i) $(ODITokenRingSnap) == "LSB" set RadioIn = >($(RadioIn), "4") else set RadioIn = >($(RadioIn), "3") endif else ifstr(i) $(ODISlotList) == {} set DlgTemplate = "DLG_ADVANCEDDRIVER4" else set ComboListItemsIn = { ODISlotList } set ComboListItemsOut = { ComboOut } set DlgTemplate = "DLG_ADVANCEDDRIVER2" endif endif ui start "AdvancedDialog" $(NwLibHandle) ui pop 1 ifstr(i) $(DLGEVENT) == "CONTINUE" set ODINodeAddress = *($(EditTextOut), 1) set ODIDefaultSlot = *($(ComboOut), 1) ifcontains "2" IN $(RadioOut) set ODITokenRing = "LSB" else set ODITokenRing = "MSB" endif ifcontains "4" IN $(RadioOut) set ODITokenRingSnap = "LSB" else set ODITokenRingSnap = "MSB" endif else-ifstr(i) $(DLGEVENT) == "BACK" endif goto dothedialog else ui pop 1 FreeLibrary $(NwLibHandle) goto end endif ui pop 1 ForListDo $(DriverListNames) EndForListDo endif FreeLibrary $(NwLibHandle) ifint $(OldVersionExisted) == $(TRUE) ifstr(i) $(CurrentInstallMode) == configure goto writeconfigureparameters endif endif StartWait goto writeparameters writeparameters = + set NTBusType = 5 Shell $(UtilityInf), GetPCIInformation, $(ODIVendor) $(ODICardId) ifint $($ShellCode) != $(!SHELL_CODE_OK) EndWait goto ShellCodeError endif set AdapterList = $($R0) set ProductHardwareDescription = + "ODI "$(ODILANDriverTitle)$(AdapterForNetWare) ForListDo $(AdapterList) set NTBusNumber = *($($),1) set NTSlotNumber = *($($),2) Shell $(UtilityInf), IsNetCardAlreadyInstalled, $(NTBusNumber), + $(NTSlotNumber), $(ProductHardwareDescription), + $(ODILANDriverName), $(SkipDescriptionCheck) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif ifstr $($R0) != "NO_ERROR" set Error = $($R0) goto fatal endif ifstr(i) $($R1) != "YES" Shell $(UtilityInf), AddHardwareComponent, $(ODILANDriverName),+ $(STF_CONTEXTINFNAME),$(ProductKeyName) ifint $($R4) != -1 Set OEM_ABANDON_OPTIONS = >($(OEM_ABANDON_OPTIONS),+ $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$($R4)) endif ifint $($ShellCode) != $(!SHELL_CODE_OK) EndWait goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR EndWait CloseRegKey $($R1) CloseRegKey $($R2) CloseRegKey $($R3) goto fatalregistry endif set KeyParameters = $($R3) set KeyAdapterRules = $($R2) set AdapterNumber = $($R4) Set-add TempAdapterNumber = $(AdapterNumber),0 set CardInstanceName = $(ODILANDriverName)" #"$(TempAdapterNumber) set NewValueList = {{ClientProvider,$(NoTitle),$(!REG_VT_SZ),+ $(ClientProvider)}, {Title,$(NoTitle),$(!REG_VT_SZ),+ "["$($R4)"] ODI "$(ODILANDriverTitle)$(AdapterForNetWare)},+ {Description,$(NoTitle),$(!REG_VT_SZ),+ $(ProductHardwareDescription)},+ {ProductName,$(NoTitle),$(!REG_VT_SZ),$(ODILANDriverName)},+ {ServiceName,$(NoTitle),$(!REG_VT_SZ),$($R5)},+ {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)},+ {OdiAdapter,$(NoTitle),$(!REG_VT_DWORD),1}} Shell $(UtilityInf), AddValueList, $($R1), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) EndWait goto ShellCodeError endif CloseRegKey $($R1) set TempProdName = """"$(ODILANDriverName)$(AdapterNumber)"""" set TempBindForm = $(TempProdName)$(NetRuleHardwareBindForm) set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),+ $(NetRuleHardwareType)},{bindform,$(NoTitle),$(!REG_VT_SZ),+ $(TempBindForm)}, {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}} Shell $(UtilityInf), AddValueList, $(KeyAdapterRules), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) EndWait goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR EndWait CloseRegKey $(KeyParameters) CloseRegKey $(KeyAdapterRules) goto fatalregistry endif CloseRegKey $(KeyAdapterRules) SetRegValue $(KeyParameters) {OdiLoadName,$(NoTitle),$(!REG_VT_SZ),$(CardInstanceName)} SetRegValue $(KeyParameters) {BusNumber,$(NoTitle),$(!REG_VT_DWORD),$(NTBusNumber)} SetRegValue $(KeyParameters) {SlotNumber,$(NoTitle),$(!REG_VT_DWORD),$(NTSlotNumber)} writeconfigureparameters = + ifstr(i) $(NdisMediaType) == "" set NdisMediaType = "1" endif set NewValueList = {{MediaType,$(NoTitle),$(!REG_VT_DWORD), + $(NdisMediaType)}} ForListDo $(DriverListNames) ifstr $(MSParameterName$(#)) != "" set-hextodec DecValue = $($($)Value) set ValueToAdd = {$(MSParameterName$(#)),$(NoTitle), + $(!REG_VT_DWORD), $(DecValue)} set NewValueList = >($(NewValueList), $(ValueToAdd)) endif EndForListDo Shell $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) EndWait goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR EndWait goto fatalregistry endif set PromptForSrcRouting = "FALSE" Ifstr(i) $(ODIMediaType) == "ETHERNET" set ODIParmList = {"Frame ETHERNET_802.2", + "Frame ETHERNET_802.3", + "Frame ETHERNET_II", + "Frame ETHERNET_SNAP" } else-Ifstr(i) $(ODIMediaType) == "TOKEN-RING" set ODIParmList = {"Frame TOKEN-RING "$(ODITokenRing), + "Frame TOKEN-RING_SNAP "$(ODITokenRingSnap) } else-Ifstr(i) $(ODIMediaType) == "FDDI" set ODIParmList = {"Frame FDDI_802.2", + "Frame FDDI_SNAP" } else set ODIParmList = {} endif ForListDo $(DriverListNames) ifstr $($($)Value) == $(Present) set ODIParmList = >($(ODIParmList), $($($)Keyword)) else-ifstr $($($)Value) != $(NotPresent) set ODIParmList = >($(ODIParmList), $($($)Keyword)" "$($($)Value)) endif EndForListDo ifstr $(ODINodeAddress) != "" set ODIParmList = >($(ODIParmList), "Node "$(ODINodeAddress)) endif ifstr $(ODIDefaultSlot) != "" set ODIParmList = >($(ODIParmList), "Slot "$(ODIDefaultSlot)) endif ForListDo $(ODIDriverAdditionalParms) ifstr $($) != "" set ODIParmList = >($(ODIParmList), $($)) endif EndForListDo ForListDo $(ODICustomList) ifstr $($) != "" set ODIParmList = >($(ODIParmList), $($)) endif EndForListDo Shell $(NwSubsInf) NwAddOdiLoadModule $(CardInstanceName) + $(AdapterNumber) $(ODIParmList) Ifint $($ShellCode) != $(!SHELL_CODE_OK) Goto ShellCodeError Endif Set ErrorString = $($R0) Ifstr(i) $(ErrorString) != NO_ERROR EndWait goto fatalregistry Endif Ifstr(i) $(PromptForSrcRouting) == "TRUE" Shell $(NwSubsInf) NwConfigureSourceRouting Endif Ifstr(i) $(!NTN_InstallMode) == install set KeyToFind = + $(!NTN_ServiceBase)"\ODILOAD\ODI_MODULES\"$(CardInstanceName) OpenRegKey $(!REG_H_LOCAL) "" $(KeyToFind) $(MAXIMUM_ALLOWED) + DriverKey set NewValueList = + {{BusNumber,$(NoTitle),$(!REG_VT_DWORD),$(NTBusNumber)},+ {BusType,$(NoTitle),$(!REG_VT_DWORD),$(NTBusType)},+ {HIN,$(NoTitle),$(!REG_VT_DWORD),1},+ {SlotNumber,$(NoTitle),$(!REG_VT_DWORD),$(NTSlotNumber)}} Shell $(UtilityInf), AddValueList, $(DriverKey), $(NewValueList) CloseRegKey $(DriverKey) Set OdiAdapterInstalledOkay = "1" Endif ifstr(i) $(CurrentInstallMode) == configure goto endwriteparameters endif endif EndForListDo endwriteparameters = + CloseRegKey $(KeyParameters) EndWait goto successful bindingadapter =+ set Error = $(BindingError) goto fatal removeadapter = + Shell $(NwSubsInf) NwRemoveAdapter $(!NTN_RegBase) Ifint $($ShellCode) != $(!SHELL_CODE_OK) Endif Shell $(NwSubsInf) NwRemoveNtAdapter $(ProductKeyName) $(ClientProvider) Ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError Endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR Ifstr(i) $(RegistryErrorIndex) == "SHELL_CODE_ERROR" goto ShellCodeError Endif goto fatalregistry Endif goto end UpgradeSoftware = + Ifstr(i) $(DoCopy) == "YES" Ifstr(i) $(SrcDir) == "" Shell $(NwSubsInf), DoAskLANSource, $(!STF_CWDDIR), $(SrcDir) YES Ifint $($ShellCode) != $(!SHELL_CODE_OK) Goto ShellCodeError Else-Ifstr(i) $($R0) == STATUS_FAILED Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL" ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) Goto fatal Else-Ifstr(i) $($R0) == STATUS_USERCANCEL Goto end Endif Set SrcDir = $($R1) Endif Endif install "Install-Option" Ifstr(i) $(DoConfig) == "YES" goto configureadapter else goto end endif successful = + goto end abandon = + ForListDo $(OEM_ABANDON_OPTIONS) Shell $(NwSubsInf) NwRemoveNtAdapter $(ProductKeyName) $(ClientProvider) $($) Ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError Endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR goto fatalregistry endif EndForListDo goto end warning = + Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "WARNING", $(Error) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif ifstr(i) $($R1) == "OK" goto $(to) else-ifstr(i) $($R1) == "CANCEL" goto $(from) else goto "end" endif nonfatalinfo = + Set CommonStatus = STATUS_USERCANCEL Set Severity = STATUS goto nonfatalmsg nonfatal = + Set Severity = NONFATAL goto nonfatalmsg nonfatalmsg = + ifstr(i) $(Error) == "" Set Severity = NONFATAL Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL" ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) endif Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), $(Severity), $(Error) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif ifstr(i) $($R1) == "OK" goto $(from) else goto "end" endif fatalregistry = + Shell $(UtilityInf) RegistryErrorString $(RegistryErrorIndex) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) goto fatal fataldetect = + Shell $(UtilityInf),RegistryErrorString,CANNOT_DETECT ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) Goto fatal fatal = + ifstr(i) $(Error) == "" Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL" ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) endif Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "FATAL", $(Error) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif goto setfailed ShellCodeError = + set DlgType = "MessageBox" set STF_MB_TITLE = "Error: "$(Function$(Option)Title) set STF_MB_TEXT = "Shell Code Error" set STF_MB_TYPE = 1 set STF_MB_ICON = 3 set STF_MB_DEF = 1 ui start "Error Message" goto setfailed setfailed = + set CommonStatus = STATUS_FAILED ifstr(i) $(OEM_ABANDON_ON) == TRUE set OEM_ABANDON_ON = FALSE goto abandon endif goto end end = + goto term term = + Shell $(NwSubsInf), CheckIfODINSUPIsNeeded Return $(CommonStatus) [Install-Option] set STF_VITAL = "" ifstr(i) $(AddCopy) == "YES" AddSectionKeyFileToCopyList $(Option) DriverName $(SrcDir) $(!STF_WINDOWSSYSPATH)\netware endif ifstr(i) $(DoCopy) == "YES" set !STF_NCPA_FLUSH_COPYLIST = TRUE CopyFilesInCopyList endif ifstr(i) $(DoConfig) == "YES" endif Exit [Source Media Descriptions] 1 = $(NetWareODILANDriversDisk) [ProductType] STF_PRODUCT = Winnt STF_PLATFORM = I386 [ChoicesNamesList] "AutoDetect", "Auto Detect Media", "AutoDetectMediaConnected" "TP", "TP (RJ-45 Connector)", "RJ45Connector" "BNC", "BNC Connector", "BNCConnector" "TP_Full_Duplex", "Full Duplex Mode", "TPFullDuplexMode" "Line_Speed", "Line Speed", "LineSpeed" [ODIListNamesSection] List1 List2 List3 List4 List5 List6 [KeyOnlyList] Num1 = $(Present) Num2 = $(NotPresent) [Line_SpeedList] Num1 = $(NotPresent) Num2 = 100 Num3 = 10 [DefaultParameterLists] KeyOnlyList Line_SpeedList [Options] ODI_N100 [ODI_N100] Title = "Compaq Ethernet or Fast Ethernet NIC" DriverName = 1, N100.LAN MediaType = "ETHERNET" CardType = "PCI" CardId = 4649 Vendor = 32902 Custom = {} List1 = "SPEED" , "Speed" , "0", { "0", "10", "100"} List2 = "FORCEDUPLEX" , "ForceDuplex", "0", {"0", "1", "2"} CanShareSlot = "NO" [Strings] [ODIStringsENG] AdapterForNetWare = " for NetWare" NetWareForWindowsNT = "NetWare for Windows NT" Present = "Present" NotPresent = "Not Present" NetWareODILANDriversDisk = "NetWare ODI LAN Drivers Disk" BindingError = "Binding: Sorry, not yet implemented." [DialogConstantsENG] Help = "&Help" OK = "OK" HelpContext = "" Continue = "&Continue" Cancel = "&Cancel" Advanced = "&Advanced" IDH_NETWAREWRKSTATIONPARMS = 901 IDH_NETWAREIPXBIND = 902 IDH_IPXSPXPARMS = 903 IDH_NETWORKPROTOCOL = 904 IDH_NETWAREODISETTINGS = 905 IDH_NETWARECLIENTINSTALL = 906 IDH_NETWARENDISODI = 907 IDH_NODEADDRESSOVERIDE = 908 IDH_RESMGRCONFIG = 951 [LANDriverDlgENG] DlgType = "RadioCombination" DlgTemplate = "List"$(ODINumberofDriverLists) Caption = "ODI "$(ODILANDriverTitle)" Adapter Configuration" EditTextIn = "" EditTextLim = "" CBOptionsGreyed = {} HelpContext = $(IDH_NETWAREODISETTINGS) [NoParmsENG] DlgType = "RadioCombination" DlgTemplate = "NO_PARAMETERS" Caption = "ODI "$(ODILANDriverTitle)" Adapter Configuration" EditTextIn = "" EditTextLim = "" CBOptionsGreyed = {} HelpContext = "" CBOptionsGreyed = {} ComboListItemsIn = {} ComboListItemsOut = {} NotifyFields = {} [AdvancedDialogENG] DlgType = "RadioCombination" Caption = "Advanced Settings" EditTextIn = $(ODINodeAddress) EditTextLim = 13 CBOptionsGreyed = {} HelpContext = $(IDH_NODEADDRESSOVERIDE) NotifyFields = {} [FileConstantsENG] ProCaption = "NetWare ODI LAN Drivers Setup" ProCancel = "Cancel" ProCancelMsg = "NetWare for Windows NT is not correctly installed. "+ "Are you sure you want to cancel copying files?" ProCancelCap = "Network Setup Message" ProText1 = "Copying:" ProText2 = "To:"Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.