; Symbian USB Phone Setup File ; Copyright (c) 2002 Symbian ltd. ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ;; LICENSEES - SEE END OF FILE FOR CONFIGURATION SECTION ;; ;; ========= THE REST OF THIS FILE SHOULD NOT REQUIRE ;; ;; MODIFICATION FOR STANDARD DISTRIBUTIONS ;; ;; ;; ;; Comments with licensee instructions are preceeded by ;; ;; >>> so that they can be easily found and removed. ;; ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; [Version] LayoutFile=layout.inf Signature=$WINDOWS NT$ Class=Modem Provider=Symbian CLASSGUID={4D36E96D-E325-11CE-BFC1-08002BE10318} DriverVer =07/01/2001,5.1.2535.0 [Manufacturer] Symbian=Models [ControlFlags] ExcludeFromSelect= * [DestinationDirs] FakeModemCopyFileSection=12 DefaultDestDir=12 [Models] %MODEL_NAME% = SymbianUSB, %MODEL_HARDWARE_ID% ;>>> Note: we recommend that each .INF file supports just one model and that multiple models ;>>> are handled by multiple .INF files [SymbianUSB.NT] CopyFiles=FakeModemCopyFileSection AddReg = All, MfgAddReg, Modem1.AddReg, EXTERNAL [SymbianUSB.NT.Services] AddService=usbser, 0x00000000, LowerFilter_Service_Inst [SymbianUSB.NT.HW] AddReg=LowerFilterAddReg [LowerFilterAddReg] HKR,,"LowerFilters",0x00010000,"usbser" [LowerFilter_Service_Inst] DisplayName = %MODEL_NAME% ServiceType = 1 StartType = 3 ErrorControl = 0 ServiceBinary = %12%\usbser.sys [FakeModemCopyFileSection] usbser.sys,,,0x20 [All] HKR,,FriendlyDriver,,unimodem.vxd HKR,,DevLoader,,*vcomm HKR,,ConfigDialog,0,modemui.dll HKR,,EnumPropPages,0,modemui.dll,EnumPropPages HKR,,PortSubClass,1,02 HKR, Init, 1,, "AT<cr>" HKR, Responses, "<cr><lf>OK<cr><lf>", 1, 00, 00, 00,00,00,00, 00,00,00,00 HKR, Responses, "<cr><lf>ERROR<cr><lf>", 1, 03, 00, 00,00,00,00, 00,00,00,00 [Modem1.AddReg] HKR,, DeviceType, 1, 01 ; External HKR,, DCB, 1, 1C,00,00,00, 00,c2,01,00, 15,20,00,00, 00,00, 0a,00, 0a,00, 08, 00, 00, 11, 13, 00, 00, 00 HKR,, Properties, 1, 00,00,00,00, 32,00,00,00, ff,00,00,00, 00,00,00,00, 00,00,00,00, 30,00,00,00, 00,c2,01,00, 00,F4,01,00 HKR, Init, 4,, "ATG1=2G11=2<cr>" [EXTERNAL] HKR,, DeviceType, 1, 01 [MfgAddReg] HKR,, InactivityScale, 1, 3c,00,00,00 HKR, Init, 2,, "AT&FX1E0&D2&C1<cr>" HKR, Init, 3,, "ATV1S0=0G44=0<cr>" HKR, Monitor, 1,, "ATS0=0<cr>" HKR, Monitor, 2,, "None" HKR, Hangup, 1,, "ATH<cr>" HKR, Answer, 1,, "ATA<cr>" HKR,, Reset,, "ATZ<cr>" HKR, Settings, Prefix,, "AT" HKR, Settings, Terminator,, "<cr>" HKR, Settings, DialPrefix,, "D" HKR, Settings, DialSuffix,, "" HKR, Settings, FlowControl_Off,, "\Q0" HKR, Settings, FlowControl_Hard,, "\Q3" HKR, Settings, FlowControl_Soft,, "\Q1" HKR, Settings, CallSetupFailTimer,, "S7=<#>" HKR, Settings, InactivityTimeout,, "C26=<#>" HKR, Responses, "<cr><lf>NO CARRIER<cr><lf>" , 1, 04, 00, 00,00,00,00, 00,00,00,00 HKR, Responses, "<cr><lf>NO DIALTONE<cr><lf>" , 1, 05, 00, 00,00,00,00, 00,00,00,00 HKR, Responses, "<cr><lf>BUSY<cr><lf>" , 1, 06, 00, 00,00,00,00, 00,00,00,00 HKR, Responses, "<cr><lf>NO ANSWER<cr><lf>" , 1, 07, 00, 00,00,00,00, 00,00,00,00 HKR, Responses, "<cr><lf>RING<cr><lf>" , 1, 08, 00, 00,00,00,00, 00,00,00,00 HKR, Responses, "<cr><lf>DELAYED<cr><lf>" , 1, 1d, 00, 00,00,00,00, 00,00,00,00 HKR, Responses, "<cr><lf>CONNECT<cr><lf>" , 1, 02, 00, 00,00,00,00, 00,00,00,00 HKR, Responses, "<cr><lf>CONNECT 9600<cr><lf>" , 1, 02, 00, 80,25,00,00, 00,00,00,00 HKR, Responses, "<cr><lf>CONNECT 19200<cr><lf>" , 1, 02, 00, 00,4b,00,00, 00,00,00,00 HKR, Responses, "<cr><lf>CONNECT 38400<cr><lf>" , 1, 02, 00, 00,96,00,00, 00,00,00,00 HKR, Responses, "<cr><lf>CONNECT 64000<cr><lf>" , 1, 02, 00, 00,fa,00,00, 00,00,00,00 HKR, Responses, "<cr><lf>CONNECT 128000<cr><lf>", 1, 02, 00, 00,f4,01,00, 00,00,00,00 HKR, Responses, "<cr><lf>ACON<cr><lf>" , 1, 02, 00, 00,00,00,00, 00,00,00,00 HKR, Responses, "0<cr>" , 1, 00, 00, 00,00,00,00, 00,00,00,00 ; OK HKR, Responses, "2<cr>" , 1, 08, 00, 00,00,00,00, 00,00,00,00 ; RING HKR, Responses, "3<cr>" , 1, 04, 00, 00,00,00,00, 00,00,00,00 ; NO CARRIER HKR, Responses, "4<cr>" , 1, 03, 00, 00,00,00,00, 00,00,00,00 ; ERROR HKR, Responses, "6<cr>" , 1, 05, 00, 00,00,00,00, 00,00,00,00 ; for WHQL dummy HKR, Responses, "7<cr>" , 1, 06, 00, 00,00,00,00, 00,00,00,00 ; NO ANSWER HKR, Responses, "8<cr>" , 1, 07, 00, 00,00,00,00, 00,00,00,00 ; for WHQL dummy ;>>>;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ;>>> Licensee Configuration Section ;;; ;>>>;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; [Strings] ;>>> Name of one-and-only supported hardware model, and hardware signature of that model ;VT modified MODEL_NAME = "Siemens SX1" MODEL_HARDWARE_ID = "USB\VID_11F5&PID_0001" ;; Siemens VID and PIDDownload Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.