This is a draft document. Refer to your installation guide. Important Notes: ================ 1. For first installation follow the procedure below. If your system already contains ASOUND-LINK and you want to re-install new version then first uninstall ASOUND-LINK (See UnInstall Procedure at the end of this document), and only then proceed to install Modio. 2. If you need unimodemV capabilities (Voice TAPI compliance), you have to install Microsoft's UnimodemV. To install ASOUND-LINK : ----------------------------------- Hardware needed : ASOUND-LINK Card (Preferably with active speakers). Software : ASOUND-LINK device drivers and files in the ASOUND-LINK Installation CD-ROM DISK. Installation Procedure: ----------------------- 1. If First installation - Plug in the ASOUND-LINK card into a free PCI slot. 2. Restart the system 3. When the system detects the card and asks for disk,insert the ASOUND-LINK CD-ROM disk then press "Browse" and select the directory "CD-ROM:\ASLINK". 4. ASOUND-LINK will be installed. After installation: ------------------- 1. In Control Panel - System/Device Manager under Sound,video and game controllers: check for 1-3 ASOUND-LINK devices 1 ASOUND-LINK Voice Modem Wave device (Optional - with Unimodem V only) In Control Panel - Modems: check for your modem 2. Double click on the ASOUND-LINK PCI Sound Chip Choose Modem property page Press the "Test Now" button and make sure that you got the "Tested OK" message. --- If audio system included ----------------------- 3. In Control Panel - Multimedia: check "Show volume control on the task bar". 4. If no Volume Control is installed, install it from the Control Panel with "Add New Software" - Windows Setup/Multimedia. 5. With Volume Control unmute Wave Device and ensure it is working by playing any .wav file (e.g. from Control Panel - Sounds). To Check that ASOUND-LINK is working: ------------------------------ 1. Create a configuration (Direct to port or Modem) of Hyper Terminal. 2. Run Hyper Terminal. type ATI1-3 and make sure you receive the Modem IDs. Dial any accessible phone number, and see that that phone rings. Dial to another modem (ATDTxxx or via the dial button of the TAPI interface) and see that a modem session is established. Tips: ----- If the modem does not work: 1. Double click on the CODEC device in Control Panel/Multimedia. Select Modem property page, press the test button and watch the diagnostics. 2. if ERROR, NO DIALTONE or a similar message is received, check whether ASOUND-LINK is connected to the line. 3. If the typing response of the terminal is very slow check that there is no interrupt conflict. 4. Check whether Hyperterminal is configured to the right port. You can find the ASOUND-LINK COM port no. in Control Panel/Modems. If not, press disconnect and change the port. 5. If the Audio Codec Device IRQ is above 7, Try configuring it IRQ 5 or 7 6. Try setting other DMA channels for the Audio Codec device --------------------------------------------------------------------- If you have successfully connected, then ASOUND-LINK has been successfully installed. --------------------------------------------------------------------- Uninstall Procedure: -------------------- 1. Go to Control Panel/ Add/Remove Programs 2. Select "ASOUND-LINK Uninstall" 3. Click on Add/Remove Button You may now install a new version of ASOUND-LINK. Setup for some applications/online services: -------------------------------------------- When using the following applications/online services, select the appropriate modem name from the modem list as follows: 1. AOL (America Online) - "Hayes Compatible (Default)" 2. Juno - "Generic 33600 modem". 3. BitWare - "Rockwell based voice modem"Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.