Please follow this procedure when upgrading the BIOS on the system board. 1) Create a bootable floppy disk. 2) Unzip or decompress the upgrading files to this diskette. There should be a least a flash utility and a bin file. 3) Take note of the bin file name. 4) Boot the system up from the floppy. DO NOT BOOT FROM THE HARD DRIVE ! This may kill the BIOS. 5) Run the flash utility or the BAT file (if available). 6) Follow the direction when running the flash utility and type in the name of the bin file when prompted. 7) After following the request of the flash utility the system should reboot with the new bios. The upgrade is completed.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.