***************************************************************************** BLDSCO.TXT ***************************************************************************** SDMS 4.0 SCO UNIX OpenServer 5 Building the SCO OpenServer BTLD Diskette To create a BTLD diskette for SCO OpenServer 5 installations, copy the raw dd image file onto a 1.44 Mbytes diskette. This process is dependent upon the operating system that you are using to create this diskette. See the instructions below for UNIX System or DOS and Windows System Users. * * * * * * * * * * * * * * * * * * * * * * * * * * For UNIX System Users Follow these steps to create the BTLD diskette: 1. Insert a 3.5-inch blank diskette into the floppy drive. 2. At the UNIX prompt, type: dd if=/<path>/sco.dd of=/dev/fd0 The <path> is where the dd image is located. On this CD-ROM, the dd image file is located here: {UNIX CD-ROM path}/DRIVERS/UNIXES/OPNSERVR/SCO.DD This command will dd the image to the blank diskette to create a BTLD diskette. * * * * * * * * * * * * * * * * * * * * * * * * * * For DOS and Windows System Users 1. Use a utility that will copy the raw dd image onto a 1.44 Mbytes diskette. FDIMAGE.EXE is a public domain utility and is available on this SDMS CD-ROM. Instructions for using this utility are included in its accompanying FDIMAGE.TXT file. 2. The dd image is located here: {CD-ROM Drive Letter}:\DRIVERS\UNIXES\OPNSERVR\SCO.DD 3. FDIMAGE.EXE is located in this directory on the SDMS CD-ROM: {CD-ROM Drive Letter}:\DRIVERS\UNIXES\FDIMAGE.EXE After the image has been copied to a 3.5-inch diskette, use this BTLD diskette for SCO OpenServer installations as instructed.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.