FETSCO5.TXT Driver File Contents (ARB1564.zip)

******************************fetsco5.txt************************************
*                                                                           *
*                         PCI FAST Ethernet Adapter                         *
*                                                                           *
*                      Ethernet Driver for SCOUNIX 5.0                      *
*                                                                           *
*                         V. 2.6,   July. 1998                               *
*                                                                           *
*****************************************************************************
                 
         
Introduction:
=============

       Below are instructions for creating an SCO "custom" installation diskette
   containing the MDI device driver for Fast Ethernet network adapter family.
   MDI drivers are used with SCO's Open Server 5.0 Operating System.  Once the
   diskette is created, follow the SCO instructions for using the "custom" and
   "netconfig" utilities to install the driver.


Contents of the Subdirectory:
=============================

    fetsco5.a              The SCOUNIX 5.0.4 driver installation package in ASCII encoded format.
    fetsco5.txt            This file.


Installation:
=============

       To begin, place the viavtcmdi.a file on a DOS formatted diskette.  fetsco5.a is
    an ASCII encoded, compressed, SCO UNIX diskette image file.  Place the
    diskette in drive A on a computer with SCO UNIX installed.  If you wish to
    use drive B, adjust the instructions below appropriately.

    1)Now enter the following commands at the UNIX prompt.  Remember, UNIX is case sensitive.
      doscp a:fetsco5.a fetsco5.a  (copies from DOS disk to current working directory)
      uudecode fetsco5.a         (decodes the ASCII file to binary VOL.000.000)

    2)Now place the 3.5" diskette you want to become the installation diskette 
      in drive A.  This should be a UNIX formatted, high density diskette.
      Enter the following command.  Again, if you wish to use drive B, adjust the
      instructions below appropriately.

      dd if=VOL.000.000 of=/dev/rfd0135ds18 (transfers disk image to diskette)

      The diskette is now ready to use with the SCO "custom" utility.

    3) Run netconfig ,and in Hardware select "Add new LAN adapter card" .
       It will find the card automatically. The driver will be set auto mode.


    4) The driver can support 5 mode:1.auto 2.100 full 3.100 half 4.10 full 5.10 half         
       If you want to change the driver mode,you must run netconfig,select the card 
       and run "Hareware"-"Modify hardware configuration"-"Advance option" to select 
       driver mode you want.After you change driver mode,you must link unix again 
       and reboot system.



   



        
     
      





Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web5, load: 1.22