RAYON PCIPort Adapter DOCUMENTATION FOR WIN2000/XP ----------------------------------------------------- DRIVER INSTALLATION If you currently have an driver installed, please remove it .After removing the driver, reboot your system. This is necessary because P&P will not allow a new driver to be installed until the driver is unloaded from memory. Once Windows has started, the PLUG & PLAY function of 2000/XP system will find the new PCIPORT card. If this is the first time to install PCIPORT card in your 2000 system. You will be informed to install the driver. Just put our PCIPORT driver diskette to driver. Please follow the instruction to specify the correct path (ex. a:\win2000) for our driver in diskette. ******NOTE: don't select the wrong path as a:\win95********************** Because the resource will be assigned by PCI BIOS. It is not easy to check the first card or sencond card by resource. So we have one jumper to set this card to be first one or second one. Then we can fix the COM port number for each card. (Traditionly, user can not confirm the COM port number for each card. Because it will depend the card numbers in one system, card slot number and the installation sequence. So you may have wrong COM port number for different condition and time point.) After you had installed PCIPORT driver in one 2000 system. You will be informed to have new hardware found. But 2000 system will install the COM port automatically. Note for multi-P588/P584 card installation. 1. We can install upto two PCIPORT cards in one 2000/XP system. 2. When we need to install two PCIPORT cards in one 2000 system, we must let one card to have jumper ON and the other card to have jumper OFF. 3. The card with jumper ON is the first card. The card with jumper OFF is the second card. We can specify the start COM port number for first card and second card seperately.(***In P&P procedure 2000/XP system will assign the available COM port***) 4. If user install P588 and P584 card in one 2000/XP system simultaneously, please confirm that the COM port number do not overlap. Or you may have only one COM port to be actived. Of course this condition must be confirmed with other COM port card in the same 2000/XP system. 5. P584/P588 card can be used in interrupt shared mode. PCI BIOS will assign the interrupt for each P588/P584 card. For multi-P584/P588 card we can have same IRQ. But user must confirm that one system have one IRQ or more to be assigned in P588/P584 card. If there are no IRQ left to be assigned for P588/P584 card, we may have wrong process in P588/P584 function. 6. If user had two P588 and P584 card in one 2000/XP system simultaneously, please insert one card firstly. Then you can insert the other card in next boot procedure. Or you may have some error message in driver installation procedure.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.