1. CM2020_win_drv.exe Driver
2. readme.txt File Contents

readme.txt Driver File Contents (CM2020_win_drv.exe)

                             README.TXT File
    README file for OMNIKEY CardMan 2020/6020 Driver, Version 3.7.3.2
                Copyright (c) 2000 - 2001 OMNIKEY AG

This document describes the release notes of the OMNIKEY CardMan 2020/6020 Driver
=================================================================================



I. General
**********


PLEASE NOTE: NEVER INSTALL THE MICROSOFT SMART CARD BASE COMPONENTS 
MANUALLY!!(scbase.exe and smclib.exe)


Supported Operating Systems:
----------------------------

This driver supports the operating systems
Windows 98
Windows Millennium Edition
Windows 2000
Windows XP


II. Installation:
*****************

The installation will be done by PnP.
The 'New Hardware Found' dialog box will appear and you will be asked for the
driver location, where you have to select the source directory of the driver 
files.

At the same time, the CardMan Diagnostic Tool will be installed. This tool is 
listed in the Control Panel and displays version and status information.

You can remove the CardMan Diagnostic Tool by deleting the following files: For 
Windows 98 and Windows Millennium Edition: : cmdiag.cpl, cmdiag.ini, cmabout.dll, 
cmabout.ini and ok.bmp in the SYSTEM directory.
For Windows 2000: cmdiag.cpl and cmdiag.ini in the SYSTEM32 directory.


MS Smart Card Base Components
-----------------------------

The CardMan 2020/6020 needs the Microsoft Smartcard Base Components for proper 
operation.

The Microsoft Smartcard Base Components are automatically installed by the driver 
files for Windows 95, Windows 98, Windows Millennium Edition and Windows NT 4.0.

The Microsoft Smartcard Base Components are already integrated in Windows 2000 
and XP.
If you have accidentally installed the Base Components under Windows 2000, you 
can recover the smartcard subsystem with the following commands on an 
administrator's console window:
Regsvr32 %windir%\system32\scardssp.dll
Scardsvr reinstall
Note: You must not use these commands for XP! They will not work.

III. Updating:
**************

Windows 98 and Windows Millennium Edition:
Because the Resource Manager does not support PnP, two message windows (two 
times:...Access is denied.) will appear during the update process. Just press OK, 
restart, and everything is all right.

Windows 2000 and XP:
When asked how you want to update the driver, do not select the recommended 
choice. Select the '...I can choose a specific driver' and in the next window 
select the newer driver.




Release date: 04/09/2002

-------------------------------- END OF FILE -------------------------------

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

• Expand the archive file (if the download file is in zip or rar format).

• If the expanded file has an .exe extension, double click it and follow the installation instructions.

• Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

• Find the device and model you want to update in the device list.

• Double-click on it to open the Properties dialog box.

• From the Properties dialog box, select the Driver tab.

• Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.