****************************************************************************
* *
* Pocket Ethernet Adapter *
* *
* NDIS Driver for Windows NT v3.1/v3.5 *
* *
* Ver. 3.00 *
* *
* README file *
* *
****************************************************************************
1. Introduction:
This Ethernet NDIS driver conforms to Microsoft LAN Manager Network
Driver Interface Specification (NDIS) Version 3.0, supporting Microsoft
Windows NT v3.1 and v3.5 environments.
2. Contents of the Subdirectory:
EP200.SYS The NDIS driver for Windows NT.
OEMSETUP.INF A setup-information file for installing the Ethernet
NDIS driver under Windows NT.
3. Installation
First, install your Ethernet Adapter on your PC system following the
procedure described in your installation manual. Then follow the in-
structions listed below to load this driver on a Windows NT system.
1) If Windows NT operating system is being installed, select other
manufacturers from the network adapter card options and follow
steps 6-10.
2) If Windows NT operating system is already installed, logon as
administrator and select Network icon from the Control Panel
window.
3) Select the "Add Adapter" button from the Network window.
4) When network adapter choices appear, select "<other> Require
disk from manufacturer" and then select the "Continue" button.
5) Insert the distribution disk into drive A: or B:, and specify the
path name where stores the Windows NT driver (e.g., A:\WINNT), if
necessary. If the driver is loaded successfully, the "Select OEM
Option" window with EP200 Ethernet Adapter listed will appear.
Press the OK button to continue.
6) Follow the instructions appearing on the screen and select the appro-
priate drive name (A:\ or B:\) when asked to give the source for the
driver.
7) Also select appropriate hardware setup of the Ethernet adapter.
8) Select OK from the Network window.
9) Shut down your PC.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.