README Driver File Contents (

*                                                                          *
*                        Pocket Ethernet Adapter                           *
*                                                                          *
*                             Packet Driver                                *
*                                                                          *
*                               Ver. 1.03                                  *
*                                                                          *
*                              README file                                 *
*                                                                          *

1. Introduction

   This Ethernet Packet driver conforms to FTP Software Public Domain Packet
   Driver Specification Revision 1.09 (Sep. 15, 1989).  It supports many
   network applications, such as FTP Software PC/TCP, NCSA TCP/IP, Wollongong
   Pathway Access and NetWare for DOS workstations.

2. Contents of the Subdirectory

      EP200.COM       The Packet driver for the Pocket Ethernet Adapters.

3. Installation

   1) Install the Pocket Ethernet Adapter on your PC system, following the
      procedure in your Pocket Ethernet adapter user's manual.

   2) Install your network applications.

   3) Copy EP200.COM to the subdirectory created while installing your net-
      work applications.

   4) Follow the instructions given in your network application menu to alter
      your system configuration file, then reboot the PC.

   5) At the DOS prompt, type as follows to load EP200:

          EP200  Packet_Int_No [LptPort]


          Packet_Int_No   The software interrupt number.  The range is from
                          0X60 to 0X80 (Hex).  This is a compulsory parameter.

          LptPort         The printer port used.  It can be 1 - 4 (blank for
                          auto-detection).  This is optional.

4. Unload

   To remove the packet driver from the main memory, run EP200 with '-u' at
   the DOS prompt, as shown below:

          EP200  -u <Packet_Int_No>


          Packet_Int    The software interrupt number specified during in-
                        stallation.  This is a compulsory parameter.

Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web5, load: 0.93