README Driver File Contents (

*                                                                          *
*                         Pocket Ethernet Adapter                          *
*                                                                          *
*                 LANtastic AI-LANBIOX Compatible Driver                   *
*                                                                          *
*                               Ver. 4.00                                  *
*                                                                          *
*                              README file                                 *
*                                                                          *

1. Introduction:

   This Ethernet LANtastic AI-LANBIOS Compatible Driver supports 802.3 and
   XEROX frame type.  Ensure that you have an adapter-independent version
   of the LANtastic product and the LANtastic NOS/AI, since AE-2 LANtastic
   v3.02 or later can no longer work with non-Artisoft hardware.

2. Contents of the Subdirectory:

      EP200.EXE       The LANtastic AI-LANBIOS compatible driver that
                      supports AILANBIOS v4.04 specification.  It works
                      with LANtastic v5.00 and LANtastic v6.00.

3. Installation

   1) Install the Pocket Ethernet Adapter on your system, following the pro-
      cedure described in your Pocket Ethernet adapter user's manual.

   2) Install the LANtastic product following the instructions in your LAN-
      tastic Network Operating System User Manual.

   3) When you are asked to select the type of your LAN adapter, choose
      "NEX016 Novell NE2000 16-bit ISA Bus or Compatible".

   4) After finished, edit STARTNET.BAT to replace the line "NEX000..."
      with "EP200 VERBOSE", as the following example shown:
                ( SHARE /L:200 )

                EP200 VERBOSE
                REDIR PCNAME LOGINS=3

                ( SERVER )
                NET LOGIN \\SERVER USER

    5) Copy EP200.EXE from the Distribution Diskette to your \LANTASTI sub-

    6) Run STARTNET.BAT to start LANtastic NOS.

4. Unload

   To unlode the driver, firstly remove AILANBIOS, then remove the driver,
   as shown below:
                 AILANBIOS REMOVE
                 EP200 REMOVE

Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web4, load: 1.18