1. CanonS100_WIN2kXP.zip Driver
2. README.TXT File Contents

README.TXT Driver File Contents (CanonS100_WIN2kXP.zip)

-----------------------------------------------------------------------------
CD-ROM VER. 1.0
-----------------------------------------------------------------------------
Copyright CANON INC. 2001
-----------------------------------------------------------------------------

"Microsoft" and "Windows" are registered trademarks of Microsoft Corporation
in the United States and other countries.

"Windows NT" is a registered trademark of Microsoft Corporation in the United
States and other countries.

All other trademarks and registered trademarks are the property of their
respective owners.


Contents ====================================================================

1.  Introduction
2.  Outline
        2.1  Main functions
        2.2  Supported operating systems
3.  Operation
        3.1  Using the menu
        3.2  Installing driver
        3.3  Installing the same driver again
4.  About Disk Utility
        4.1  Creating installation floppy disks
        4.2  Installation using installation disks

1. Introduction =============================================================

This Readme.txt file explains how to install the contents of the CD-ROM. See
the Readme.txt file and manual for each driver item for software-specific
details. 


2. Outline ==================================================================

The following driver is contained in this CD-ROM: 

        - BJ Raster Printer Driver Ver. 6.70 for 
          Microsoft(R) Windows(R) Millennium Edition,
          Microsoft(R) Windows(R) 98 and Microsoft(R) Windows(R) 95
        - BJ Raster Printer Driver Ver. 1.32 for 
          Microsoft(R) Windows(R) 2000
        - USB Driver for Microsoft(R) Windows(R) Millennium Edition and Microsoft(R) Windows(R) 98
       
The languages supported by the driver are as listed below.

        Windows Me,Windows 98 and Windows 95 Printer Driver
        - English
        - French
        - German
        
        Windows 2000 Printer Driver
        - English
        - French
        - German
        
2.1  Main functions

The main functions of this CD-ROM are as follows: 

        - Executes the installer for each driver item.
        - Displays the Readme.txt file for each driver item using Notepad.
        - Creates installation floppy disks for each driver item.
        - Displays an electronic manual.

2.2  Supported operating systems

This CD-ROM supports the following operating systems: 

        - Microsoft Windows 98
        - Microsoft Windows 2000 Professional/Server
        - Microsoft Windows Millennium Edition


3. Operation ================================================================

IMPORTANT
- Save any data you are working with before you begin installation, 
  and close all applications.
- Before installation, remove any earlier version of the driver.

To use the CD-ROM, do either of the following operations: 

        - Load this CD-ROM in the CD-ROM drive. After a brief delay, the 
          installer starts automatically.

        - Double-click the My Computer icon at the top left of the desktop. 
          Then double-click the CD-ROM icon in the window that opens.

If you cannot get the installation screen to appear, see "Manual 
installation", below.

- Manual installation

1) Load the CD-ROM.

2) Click Run... in the Start menu. The Run dialogue box opens.

3) Click Browse. The Browse dialogue box opens.

4) Choose the CD-ROM icon from the Look in box.

5) Select "MSetup.exe", and click Open.

6) Click OK. The installer starts.

The subsequent steps are the same as when installation is carried out 
automatically.

- If the language selection dialogue box appears

If your operating system language is not supported by the CD-ROM, the dialogue 
box for selecting which language to use opens. Choose the language, and click 
Next.

3.1  Using the menu

The following 2 buttons appear on the screen: 

        - [Install Software]
        - [View Documentation]

[Install Software] displays the screen for installing the driver.

[View Documentation] displays the Reference Guide. The Guide is a PDF file that 
is viewed with Adobe Acrobat Reader or Acrobat Exchange. If Acrobat is not 
already installed on your machine, Acrobat Reader installer is started 
automatically.

The following section describes the screen for installing the driver.

On the initial screen, the setting for choosing the appropriate driver is 
selected. Normally, if you click Start, the installer for the required driver 
is run automatically.

If you want to install the scanner software, click the grey button on 
the left. The LED indicator goes red. The option for installing scanner 
software does not appear for a printer that does not support a scanner.

There is a Readme button to the right of the driver legend. When you click 
this button, the Readme file for the driver is displayed using Notepad. 
Before installing the driver item, you should look at its Readme.

3.2  Installing driver

Make sure the necessary driver has been chosen (the LED indicator of the 
appropriate green button should be on), and click Start.

The installer for the driver is started.

The option for installing scanner software does not appear for a printer 
that does not support a scanner.

- Printer driver installation

The installation of the printer driver is done automatically. If a message 
appears during the process, follow the instructions that appear. When 
installation of the printer driver is complete, the scanner software 
installer starts if appropriate.

- Scanner software installation

To install the scanner software, follow the instructions that appear on 
the screen. When installation is complete, the initial screen 
automatically reappears.

- When installation finishes

When installation of the printer driver is complete, the selected printer 
is set up as the default printer.

3.3  Installing the same driver again

Use the following procedure to install a driver item from the CD-ROM after 
it has already been installed.

1) The legend for the driver that is already installed will be greyed out, 
   and "Installed" will be indicated on the right. Select the driver by 
   clicking the green button to the left of the legend so that the LED 
   indicator comes on.

   Also, if a newer version of the driver is currently installed, you cannot 
   select reinstallation. To reinstall an old version, first remove the 
   currently-installed newer version.

2) Make sure the correct driver has been chosen for installation, and click 
   Start.


4. About Disk Utility =======================================================

If you click Utilities and then click Disk Utility on the screen to install 
the driver, the Disk Utility for creating installation floppy disks starts.

If your computer has a CD-ROM drive, you can install the driver directly 
from the CD-ROM. In this case, you can ignore the following explanation.

The CD-ROM contains the data necessary to create installation floppy disks. 
If your computer does not have a CD-ROM drive, you can create installation 
disks by copying the necessary files from the CD-ROM to floppy disks using 
another computer. The driver can then be installed using these installation 
disks.

Certain operating systems and drivers may not support this function.

4.1  Creating installation floppy disks

1) Obtain some 2HD floppy disks.
   A CD-ROM drive is necessary to copy the necessary files to the floppy 
   disks. Check whether your computer at work or a friend's computer has 
   a CD-ROM drive that you can use to create the installation disks.

2) Format the floppy disks.

3) Load the CD-ROM in the CD-ROM drive.

4) When the screen for choosing which driver to install appears, click the 
   button to the left of the Utilities legend. The screen changes to the one 
   for choosing utilities.

5) Click Disk Utility. Disk Utility is started.

6) Choose the operating system and the model of the printer for which to 
   create the installation disks, and click Next.

7) Select the language for the printer driver and scanner software, and 
   click Next.

8) Select which drive to copy the files to, and click Next. An MO or other 
   removable-disk drive drive can be chosen instead of a floppy disk drive.

9) Load a floppy disk and click Start to begin copying.

10) If copying finishes without error, OK is indicated on the icon for disk 
    1, and disk 2 can then be created. Load a floppy disk and click Start. 
    Create all installation disks in the same way. You should put a label on 
    each disk showing the disk number, driver name, version number, date of 
    creation, and any other important details.

4.2  Installation using installation disks

The printer driver or scanner software can be installed using the 
installation disks as explained below.

- Printer driver

1) Load the printer driver installer disk #1 in the floppy disk drive.

2) From the Start menu, select Run...

3) Click Browse...

4) In the Look In box, select 3½ Floppy.

5) Select Setup.exe and click Open.

6) Click OK. The installer starts. Carry out installation by following the 
   instructions on the screen.

- Scanner software

1) Load the scanner software installer disk #1 in the floppy disk drive.

2) From the Start menu, select Run...

3) Click Browse...

4) In the Look In box, select 3½ Floppy.

5) Select Setup.exe and click Open.

6) Click OK. The installer starts. Carry out installation by following the 
   instructions on the screen.