readme.txt Driver File Contents (util_fingerprint_v5.6.0_Build3221.zip)

		Readme for Protector Suite QL 5.6

		   Copyright 2001-2006 by UPEK
		      All Rights Reserved.
--------------------------------------------------------------------
Thank you for using Protector Suite QL. This
Read Me file contains important information regarding the current
version of this product. It is highly recommended to read the entire
document.


___________________
WHAT'S IN THIS FILE

- What is Protector Suite QL
- Installation
- Silent Install
- SMS Install
- Documentation
- Known Problems



___________________________________________________________________
WHAT IS PROTECTOR SUITE QL

Protector Suite QL is a desktop security
and convenience product for Windows 2000, XP, and Vista.
Its components provide an easy and convenient access to your computer,
web pages, and sensitive files using a biometric device. The product is designed
to be extremely easy to install and to use.

Protector Suite QL enables
- fingerprint logon (with boot security support for strip sensor)
- fingerprint fast user switching (on Windows XP/Vista)
- accessing web pages and replaying forms using your fingerprint
- registering dialogs
- storing and accessing your sensitive files in a special "File Safe" archive using your fingerprints.
- launching favorite application using your fingerprints

_____________________
INSTALLATION

Protector Suite QL installation is carried out by the Setup
wizard. It is recommended to read explaining texts in wizard
screens to avoid potential problems. The detailed description of
the installation procedure can be found in the user documentation.

Authentication hardware is installed together with the whole product.
If you use an external type of hardware, connect it after you install
the software part. You will be asked to do so after you reboot
the computer after installation and log on your computer. If any problems,
drivers and instructions can be found in tc-driver folder. 


_______________________
SILENT INSTALL

Silent installation of Protector Suite QL is also possible.
32-bit OS:
Run Setup.exe in the Install directory on your CD-ROM.
Use the following syntax:

Setup.exe <PROPERTY=VALUE> /q /i

Example:
Setup.exe USERNAME="Test user" COMPANYNAME="MyCompany" INSTALLDIR="F:\Program Files\Protector Suite QL" /q /i

64-bit OS: 
Run Setup.msi in the Install directory on your CD-ROM.
Use the following syntax:

msiexec.exe /i Setup.msi  /q <PROPERTY=VALUE>

Example:
msiexec /i Setup.msi /q USERNAME="Test user" COMPANYNAME="MyCompany" INSTALLDIR="F:\Program Files\Protector Suite QL"

(Silent setup must be run from elevated Command prompt in Vista)

You can specify the following properties:

INSTALLDIR
Installation directory

CTLCNTR
Set to 0 if you do not display Control Center on startup.

NOSAFE
Set to 1 if you do not want to install File Safe.

NOPP
Set to 1 if you do not want to install Password Bank.

NOAPPL
Set to 1 if you do not want to install Application Launcher.


All properties are optional.

To uninstall, use /x instead of /i.

During standard uninstall with user interface, dialogs for selecting
whether to delete existing passports and disable the boot security feature
are displayed. In silent uninstall, you can use the following properties:

DELPAS
Set DELPAS="1" to delete existing passports.

If these properties are not defined, or have any other value, passports
are left on the computer and the boot security remains enabled. If you
leave the boot security on, you will not be able to edit fingerprints
in the boot security memory unless you re-install the Protector Suite.

Example:
Setup.exe DELPAS="1" /q /x
uninstalls Protector Suite QL, deletes all existing passports, and leaves
the boot security on.

___________________
SMS INSTALL

SMS Installations are also supported. Open SMS Administrator Console, create
a new package and set package properties in a standard way. Open the package
and select New-Program in Programs item. To the command line field, enter

Setup.exe /m yourmiffilename /q /i

Optionally, enter desired parameters as described in the Silent Install
section. Setup normally reboots at the end of installation process.
If you want to suppress all reboots during installation and reboot later
(after installing more programs), add REBOOT="ReallySuppress" to the list
of properties. 

__________________________
DOCUMENTATION

You can find the documentation of the Protector Suite QL
in the \Doc directory on the installation CD. The documentation is in pdf
format. If you do not have Acrobat Reader installed on your computer,
you can download it from www.adobe.com.

Hardware specific installation and troubleshooting information
for your authentication hardware you will find in the README.TXT file
in \tc-driver directory.

____________________________
KNOWN PROBLEMS


My Safe to File Safe conversion and various antivirus programs
My Safe host files cannot be mounted when some antivirus
programs are on. This problem exists e.g. with Norton AntiVirus, or Sophos.
The solution is to set the antivirus program to ignore My Safe host files.
Scanning host files does not make sense due to the encrypted nature of
My Safe.
Excluding My Safe in Norton AntiVirus:
1. Open NAV Options dialog
2. Go to System | Exclusions. Add a new entry for *.fdp
   and enable Include subfolders checkbox.
3.  Go to System | Auto Protect |File types to scan | Select extensions
    and add .fdp entry.
Excluding My Safe in Sophos:
1. Run Sophos AntiVirus "configuration center"
2. Select ICClient tab.
3. Choose Options | Configuration from the menu.
4. Choose Check tab and uncheck the Automatically detected as executable type checkbox.
5. Click OK.

File Safe Drag-and-drop (Copy-and-paste) on Vista
If you try to drag-and-drop (copy-and-paste) on Vista from File Safe into a folder under
UAC protection, no elevation prompt is displayed and operation fails with "Access denied".
It is necessary to copy the file into a folder which you can access and then perform
the copy operation in a standard way.

Firefox Support
Firefox (32-bit only) is not supported on 64-bit Vista. 

Standby problem
Computer can be woken up from standby by a finger even if "Allow this device
to bring PC out of standby"  is unchecked. The driver is not able to turn
remote wakeup off in situation when remote wakeup is disabled and selective
suspend enabled in the device manager. Both check boxes must be unchecked
for the correct behavior.







Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: ftp, load: 1.25