****************************************************************************
** ENU *********************************************************************
****************************************************************************
*
* Intel(R) Chipset Software Installation Utility
* Installation Readme
*
* NOTE: This document refers to systems containing the
* following Intel chipsets:
*
* Intel(R) 810 Chipset
* Intel(R) 810E Chipset
* Intel(R) 815 Chipset
* Intel(R) 815E Chipset
* Intel(R) 815EM Chipset
* Intel(R) 820 Chipset
* Intel(R) 820E Chipset
* Intel(R) 840 Chipset
* Intel(R) 850 Chipset
* Intel(R) 440BX AGPset
* Intel(R) 440DX AGPset
* Intel(R) 440EX AGPset
* Intel(R) 440GX AGPset
* Intel(R) 440LX AGPset
* Intel(R) 440ZX AGPset
* Intel(R) 440MX Chipset
* Intel(R) 430TX PCIset
* Intel(R) 815EP Chipset
* Intel(R) 810E2 Chipset
*
*
****************************************************************************
****************************************************************************
****************************************************************************
* CONTENTS OF THIS DOCUMENT
****************************************************************************
This document contains the following sections:
1. Overview
2. System Requirements
3. Installing the Software
3A. Installing the Software in Interactive Mode
3B. Installing the Software in Silent Mode
3C. List of Available Command Line Flag Options
4. Verifying Installation of the Software
5. Contents of the Distribution Package
6. Identifying the Software Version Number
7. Troubleshooting
****************************************************************************
* 1. OVERVIEW
****************************************************************************
The Intel(R) Chipset Software Installation Utility installs
to the target system the Windows* INF files that outline to
the operating system how the chipset components will be
configured. This is needed for the proper functioning of
the following features:
- Core PCI and ISAPNP Services
- AGP Support
- IDE/ATA33/ATA66 Storage Support
- USB Support
- Identification of Intel Chipset Components in
Device Manager
****************************************************************************
* 2. SYSTEM REQUIREMENTS
****************************************************************************
1. The software included with this distribution package is
designed to operate with the following chipset
configurations:
Intel(R) 810 Chipset
Intel(R) 810E Chipset
Intel(R) 815 Chipset
Intel(R) 815E Chipset
Intel(R) 815EM Chipset
Intel(R) 820 Chipset
Intel(R) 820E Chipset
Intel(R) 840 Chipset
Intel(R) 850 Chipset
Intel(R) 440BX AGPset
Intel(R) 440DX AGPset
Intel(R) 440EX AGPset
Intel(R) 440GX AGPset
Intel(R) 440LX AGPset
Intel(R) 440ZX AGPset
Intel(R) 440MX Chipset
Intel(R) 430TX PCIset
Intel(R) 815EP Chipset
Intel(R) 810E2 Chipset
2. One of the following operating systems must be
installed on the system:
Windows 95 4.00.950 (Original release)
Windows 95 4.00.950a (OSR1)
Windows 95 4.00.950b (OSR2 without USB
Supplement)
Windows 95 4.00.950b (OSR2.1 with USB
Supplement)
Windows 95 4.00.950c (OSR2.5 with or
without USB Supplement)
Windows 98 4.10.1998 (Original release)
Windows 98 Second Edition
4.10.2222 (Original release)
Windows ME 4.90.3000 (Original release)
Windows 2000 5.00.2195 (Original release)
To verify which operating system has been installed onto
the target system, follow the steps below:
a. Click on Start.
b. Select Settings.
c. Select Control Panel.
d. Double-click on the System icon.
e. Click on the General system properties tab.
f. Verify which OS has been installed by reading
the System information.
3. The software should be installed on systems with at
least 32 MB of system memory.
4. There should be sufficient hard disk space in the <TEMP>
directory (typically C:\WINDOWS\TEMP) of the system on
which this software is installed.
Please check with your system provider to determine which
operating system and Intel chipset are used in your system.
****************************************************************************
* 3. INSTALLING THE SOFTWARE
****************************************************************************
This software can be installed in two modes: Interactive or
Silent. The Interactive Mode requires user input during
installation; the Silent Mode does not.
Additionally, this software offers a set of command line
flag options that enable extended installation functionality.
The command line flags are not case-sensitive. See Section
3C for detailed descriptions of these flags.
Important Note:
The Intel(R) Chipset Software Installation Utility is
distributed in two formats -- self extracting .EXE files
(INFINST_xxx.EXE) or compressed .ZIP files (INFINST_xxx.ZIP).
Depending on which distribution format is being executed,
the command-line syntax may differ. See Section 3C for more
details.
****************************************************************************
* 3A. INSTALLING THE SOFTWARE IN INTERACTIVE MODE
****************************************************************************
1. Check the System Requirements. The operating system
must be fully installed and running on the system before
running this software.
2. Close any running applications. Otherwise, you may
experience difficulties.
3. Run the InstallShield* installation program:
Self-extracting .EXE distribution: INFINST_xxx.EXE
Compressed .ZIP distribution : SETUP.EXE
4. You will be prompted to agree to the license agreement.
If you do not agree, the Installer will exit before
extracting any files.
5. Follow the on-screen instructions and use the default
settings to complete the setup, once the operating
system has rebooted.
6. This completes the installation of the Intel(R) Chipset
Software Installation Utility.
****************************************************************************
* 3B. INSTALLING THE SOFTWARE IN SILENT MODE
****************************************************************************
1. Check the System Requirements. The operating system
must be fully installed and running on the system before
running this software.
2. Close any running applications. Otherwise, you may
experience difficulties.
3. Run the InstallShield installation program:
For silent install with auto-reboot:
Self-extracting .EXE distribution:
INFINST_xxx.EXE -a -b -s
Compressed .ZIP distribution :
SETUP.EXE -b -s
- OR -
For silent install without auto-reboot:
Self-extracting .EXE distribution:
INFINST_xxx.EXE -a -s
Compressed .ZIP distribution :
SETUP.EXE -s
4. The utility will perform the necessary updates and
record the installation status in the following
system registry key:
HKEY_LOCAL_MACHINE\Software\Intel\INFInst
5. If the utility was invoked with the "-b" flag, the
system will automatically reboot if the update was
successful.
NOTE: The system MUST be rebooted for all device
updates to take effect.
6. To determine whether the install was successful,
verify the 'install' value in the registry key
specified in Step 4.
The following table describes the various parameter
values:
Value Type Data Description
------ ---- ---- -----------
"install" String "success" The installation
was successful.
"fail" The installation
was not successful.
No INF files were
copied to the
system.
"reboot" String "Yes" A reboot is required
to complete the
installation.
"No" No reboot is required
to complete the
installation.
"version" String <varies> Current version
number of the
Intel(R) Chipset
Software Installation
Utility
****************************************************************************
* 3C. LIST OF AVAILABLE COMMAND LINE FLAG OPTIONS
****************************************************************************
The Intel(R) Chipset Software Installation Utility supports
several command line flags for various installation options.
All command line flags and parameters must be separated by a
space, except for the language code after the '-L' flag.
Due to the different distribution formats available for the
Intel(R) Chipset Software Installation Utility, the command
line flag syntax may vary:
1. Self-Extracting .EXE Distribution:
When installing this software using the .EXE
distribution, an extra '-A' must be appended to the
INFINST_xxx.EXE program call (i.e. INFINST_ENU.EXE -A)
in order to successfully pass command line parameters.
The extra '-A' flag for the self-extracting .EXE
package is DIFFERENT from the '-A' command line flag
option described below.
Example: To extract INF files using the '-A' flag
described below, the installation program
should be invoked as follows:
INFINST_ENU.EXE -A -A (optional -P)
2. Compressed .ZIP Distribution:
When installing this software using the .ZIP
distribution, there is no need to append any extra
flags to the SETUP.EXE program call in order to pass
command line flags.
Example: To extract INF files using the '-A' flag
described below, the installation program
should be invoked as follows:
SETUP.EXE -A (optional -P)
Below is a list of all the available command line flags
that may be used with the program call. Note that the
'-L' and the '-S' flags MUST be specified at the end of
the command line flag list.
Flag Description
---- -----------
-? Help flag. Displays the list of available
command line flags. This parameter works
in the Interactive mode only.
-A Extracts INF files, README.TXT and
instructions for OEM preload (PRELOAD.TXT)
to either "C:\Program Files\Intel\InfInst"
or the <Installation Path> directory
specified using the '-P' flag. The
software will NOT install these INF files
to the system. This flag can be combined
only with the '-P' flag option. All other
options will be ignored if the '-A' flag
is specified. This parameter works in
either Silent mode or Interactive mode.
-B Automatically reboots the system after
installation. This flag is ignored if '-A'
flag is specified. This parameter works
in either Silent mode or Interactive mode.
-L<LangCode>
Forces the InstallShield user interface to
display the specified language during
setup. Note that there should be NO
spaces between '-L' and the 4-digit
language code (see below). This flag and
the '-S' flag must be placed at the end
of the command line flag list. This
parameter works in Interactive mode only.
-P <Installation Path>
Specifies the HDD location to which the
INF program files are copied. If this
flag is not specified at the command line,
the <Installation Path> directory is by
default assumed to be:
C:\Program Files\Intel\INFInst
If this flag is used without the '-A'
option, only README.TXT will be copied to
<Installation Path>. The directory name
can include spaces. In this case,
however, a pair of double quotes (") must
enclose the directory name. This
parameter works in either Silent mode or
Interactive mode.
-S Runs the Installer in silent mode. No
user interface is displayed. This flag
and the '-L' flag must be placed at the
end of the command line flag list.
Below are the language codes used with the '-L' flag:
Language <LangCode>
-------- ----------
Chinese (PRC) 0804
Chinese (Taiwan) 0404
Danish 0006
Dutch 0013
English (UK - International) 0809
English (US) 0409
Finnish 000B
French (Canadian) 0C0C
French (Standard) 040C
German 0007
Italian 0010
Japanese 0011
Korean 0012
Norwegian 0014
Polish 0015
Portuguese (Brazilian) 0416
Portuguese (Standard) 0816
Russian 0019
Spanish 000A
Swedish 001D
Thai 001E
****************************************************************************
* 4. VERIFYING INSTALLATION OF THE SOFTWARE
****************************************************************************
Run Device Manager to verify the correct installation and
usage of the INF files.
For Windows 95, Windows 98 and Windows 98 Second Edition,
Windows ME:
1. Click on Start.
2. Select Settings.
3. Select Control Panel.
4. Double-click on System icon.
5. Click on Device Manager tab.
6. Click on View Devices by Connection button.
7. Click on Plug and Play BIOS, or Advanced
Configuration and Power Interface (ACPI) BIOS.
8. Click on PCI bus.
For Windows 2000:
1. Click on Start.
2. Select Settings.
3. Select Control Panel.
4. Double-click on System icon.
5. Click on Hardware tab.
6. Click on Device Manager button.
7. From the View menu, select menu item Devices by
connection.
8. Click on Standard PC, or
Advanced Configuration and Power Interface (ACPI)
PC.
9. Click on PCI bus.
After the Device Manager is launched as described above,
check the descriptions for the following entries:
*** NOTE: Device Manager will display only the names
of devices currently detected in the
system.
Intel(R) 810 Chipset:
Intel(R) 82810 System and Graphics Controller
-or-
Intel(R) 82810 DC-100 System and Graphics
Controller
Intel(R) 810E Chipset, Intel(R) 810E2 Chipset:
Intel(R) 82810E DC-133 System and Graphics
Controller
Intel(R) 820 Chipset, Intel(R) 820E Chipset:
Intel(R) 82820 Processor to I/O Controller
Intel(R) 82820 Processor to AGP Controller
Intel(R) 840 Chipset:
Intel(R) 82840 Processor to I/O Controller
Intel(R) 82840 Processor to AGP Controller
Intel(R) 82840 PCI Bridge
Intel(R) 82806AA PCI 64-bit Hub:
Intel(R) 82806AA Advanced Programmable Interrupt
Controller
Intel(R) 82806AA PCI Bridge
Intel(R) 82806AA Controller (reserved)
Intel(R) 82801AA I/O Controller Hub (ICH):
Intel(R) 82801AA LPC Interface Controller
Intel(R) 82801AA Ultra ATA Controller
Intel(R) 82801AA USB Universal Host Controller
Intel(R) 82801AA SMBus Controller
Intel(R) 82801AA PCI Bridge
Intel(R) 82801AB I/O Controller Hub (ICH0):
Intel(R) 82801AB LPC Interface Controller
Intel(R) 82801AB Ultra ATA Controller
Intel(R) 82801AB USB Universal Host Controller
Intel(R) 82801AB SMBus Controller
Intel(R) 82801AB PCI Bridge
Intel(R) 82371AB PCI to ISA/IDE Xcelerator (PIIX4):
Intel(R) 82371AB PCI to ISA bridge (EIO mode)
Intel(R) 82371AB PCI to ISA bridge (ISA mode)
Intel(R) 82371AB Power Management Controller
Intel(R) 82371AB/EB/MB PCI Bus Master IDE
Controller
Intel(R) 82371AB/EB/MB PCI to USB Universal Host
Controller
Intel(R) 82371EB/MB PCI to ISA/IDE Xcelerator (PIIX4):
Intel(R) 82371EB/MB PCI to ISA bridge (EIO mode)
Intel(R) 82371EB/MB PCI to ISA bridge (ISA mode)
Intel(R) 82371EB/MB Power Management Controller
Intel(R) 82371AB/EB/MB PCI Bus Master IDE
Controller
Intel(R) 82371AB/EB/MB PCI to USB Universal Host
Controller
Intel(R) 82371SB PCI to ISA/IDE Xcelerator (PIIX3):
Intel(R) 82371SB PCI to ISA bridge
Intel(R) 82371SB PCI Bus Master IDE Controller
Intel(R) 82371SB PCI to USB Universal Host
Controller
Intel(R) 440MX Chipset:
Intel(R) 82440MX Processor to I/O Controller
Intel(R) 82440MX PCI to ISA Bridge
Intel(R) 82440MX Power Management Controller
Intel(R) 82440MX Bus Master IDE Controller
Intel(R) 82440MX USB Universal Host Controller
Intel(R) 430TX PCIset:
Intel(R) 82443TX Processor to PCI bridge
Intel(R) 440BX AGPset, Intel(R) 440DX AGPset,
Intel(R) 440ZX AGPset:
Intel(R) 82443BX/ZX/DX Processor to PCI bridge
Intel(R) 82443BX/ZX/DX Processor to AGP controller
Intel(R) 440GX AGPset:
Intel(R) 82443GX Processor to PCI bridge
Intel(R) 82443GX Processor to AGP controller
Intel(R) 440LX AGPset:
Intel(R) 82443LX Processor to PCI bridge
Intel(R) 82443LX Processor to AGP controller
Intel(R) 815 Chipset, Intel(R) 815E Chipset, Intel(R) 815EP Chipset,
Intel(R) 815EM Chipset:
Intel(R) 82815 Processor to I/O Controller - 1130
Intel(R) 82815 Processor to AGP Controller - 1131
Intel(R) 82801BA I/O Controller Hub:
Intel(R) 82801BA LPC Interface Controller - 2440
Intel(R) 82801BA PCI Bridge - 244E
Intel(R) 82801BA Ultra ATA Storage
Controller - 244B
Intel(R) 82801BA/BAM SMBus Controller - 2443
Intel(R) 82801BA/BAM USB Universal Host
Controller - 2442
Intel(R) 82801BA/BAM USB Universal Host
Controller - 2444
Intel(R) 82801BA/BAM AC '97 Audio Controller - 2445
Intel(R) 82801BAM I/O Controller Hub:
Intel(R) 82801BAM LPC Interface Controller - 244C
Intel(R) 82801BAM PCI Bridge - 2448
Intel(R) 82801BAM Ultra ATA Storage
Controller - 244A
Intel(R) 82801BA/BAM SMBus Controller - 2443
Intel(R) 82801BA/BAM USB Universal Host
Controller - 2442
Intel(R) 82801BA/BAM USB Universal Host
Controller - 2444
Intel(R) 82801BA/BAM AC '97 Audio
Controller - 2445
Intel(R) 850 Chipset:
Intel(R) 82850 Processor to I/O Controller - 2530
Intel(R) 82850/82860 Processor to AGP
Controller - 2532
10. On certain systems, the following device may also be
updated:
a. Click on View Devices by Connection button.
b. Click on Plug & Play BIOS, or Advanced
Configuration and Power Interface (ACPI) BIOS.
c. Verify that the following entry is present:
Intel(R) 82802 Firmware Hub Device -OR-
Intel(R) Security Driver
****************************************************************************
* 5. CONTENTS OF THE DISTRIBUTION PACKAGE
****************************************************************************
The Intel(R) Chipset Software Installation Utility package
contains the following items:
File(s)
-------
INFINST_xxx.EXE -or- INFINST_xxx.ZIP
README.TXT
The version of the software included in the distribution
package is specified in the file RELNOTES.TXT.
RELNOTES.TXT is available in English only.
After installation on a Windows 95, Windows 98, Windows ME or
Windows 2000 system, one or more of the following
INF files are copied to the <Windows>\INF directory:
File(s)
-------
440MXCOR.INF
440MXIDE.INF
440MXUSB.INF
810.INF
810B.INF
820.INF
820B.INF
840.INF
850.INF
ICH2AUD.INF
ICH2CORE.INF
ICH2IDE.INF
ICH2SMB.INF
ICH2USB.INF
ICHx.INF
ICHxIDE.INF
ICHxSMB.INF
ICHxUSB.INF
IFWH.INF
IHOST.INF
P64H.INF
P64HRES.INF
PIIXXIDE.INF
PIIXXUSB.INF
PIIX4.INF
815.INF
ICH2CORM.INF
ICH2IDEM.INF
*** NOTE: Only the files that reference the currently
detected devices are copied to the system.
If the -A option is exercised, the files are
not copied to the <Windows>\INF directory.
See Section 3C for more information.
One or more of the following digital signature files are
installed to the <Windows>\CATROOT directory on a
Windows 98, Windows ME or Windows 2000 system ONLY:
File(s)
-------
440MXCOR.CAT
440MXIDE.CAT
440MXUSB.CAT
810.CAT
820.CAT
820B.CAT
840.CAT
850.CAT
ICHx.CAT
ICHxIDE.CAT
ICHxSMB.CAT
ICHxUSB.CAT
IFWH.CAT
P64H.CAT
P64HRES.CAT
815.CAT
ICH2AUD.CAT
ICH2CORE.CAT
ICH2IDE.CAT
ICH2USB.CAT
ICH2SMB.CAT
ICH2CORM.CAT
ICH2IDEM.CAT
*** NOTE: Only the files that reference the currently
detected devices are copied to the system.
If the -A option is exercised, the files are
not copied to the <Windows>\CATROOT directory.
See Section 3C for more information.
****************************************************************************
* 6. IDENTIFYING THE SOFTWARE VERSION NUMBER
****************************************************************************
The version of the software included in the distribution
package is specified in the file RELNOTES.TXT.
RELNOTES.TXT is available in English only.
The version of the software included in the distribution
package can also be identified by examining the following
registry location:
Key name: \\HKEY_LOCAL_MACHINE\Software\Intel\InfInst
Value name: version
****************************************************************************
* 7. TROUBLESHOOTING
****************************************************************************
It is assumed that the system requirements in Section 2
above have been satisfied.
Issue: System locks up during Device Manager Remove or
during restart.
Solution: System lockup can occur during Restart as a
result of several possible system issues. In
the event of system lockup, restart the machine
and view Device Manager. If devices are listed
properly and the system experiences no further
problems, then the .INF file restore process was
successful. If devices are not configured
correctly, try re-running the procedures
outlined in Section 3.
If this does not fix problems or further
problems are experienced, reinstall the
operating system.
Issue: After running the setup program and rebooting
the machine, Windows reports that it cannot
find one of the following files:
ESDI_506.pdr
Solution: Click Browse in the dialog box where this
problem occurs, locate the
<Windows>\System\IOSubsys
directory and click OK. The system should
be able to locate this file in this directory
and continue re-enumerating for the new
devices.
Issue: After running the setup program and rebooting
the machine, Windows reports that it cannot
find one of the following files:
UHCD.SYS
USBD.SYS
USBHUB.SYS
Solution: Click Browse in the dialog box where this
problem occurs, locate the
<Windows>\System32\drivers (for Windows 98,
Windows ME)
-or-
<Windows>\System (for Windows 95)
directory, and click OK. The system should
be able to locate this file in this directory
and continue re-enumerating for the new
devices.
Issue: During setup, installation stops and prompts
for one of the following files:
UHCD.SYS
USBD.SYS
USBHUB.SYS
Solution: Ensure that the Windows 95 USB Supplement has
been installed prior to running the Intel(R)
Chipset Software Installation Utility setup
program.
Issue: After running the setup program and rebooting
the machine, Windows reports that it cannot
find the following file:
isapnp.vxd
Solution: Click Browse in the dialog box where this
problem occurs, locate the
<Windows>\System
directory, and click OK. The system should
be able to locate this file in this directory
and continue re-enumerating for the new
devices.
Issue: After performing the silent install, the
HKLM\Software\Intel\InfInst key was not created
or the data of the value "install" is not
"success".
Solution: This is caused by one of the following
scenarios:
- The current system does not contain
a supported operating system, or
- The current system does not contain
a supported chipset.
Verify the System Requirements in Section 2.
****************************************************************************
****************************************************************************
* DISCLAIMER
****************************************************************************
Intel is making no claims of usability, efficacy or
warranty.
The INTEL SOFTWARE LICENSE AGREEMENT
(OEM / IHV / ISV Distribution & Single User)
completely defines the licensed use of this software.
****************************************************************************
Information in this document is provided in connection with
Intel products. No license, express or implied, by estoppel
or otherwise, to any intellectual property rights is granted
by this document. Intel assumes no liability whatsoever,
and Intel disclaims any express or implied warranty
relating to sale and/or use of Intel products, including
liability or warranties relating to fitness for a particular
purpose, merchantability or infringement of any patent,
copyright or other intellectual property right. Intel
products are not intended for use in medical, life saving,
or life-sustaining applications.
****************************************************************************
Intel Corporation disclaims all warranties and liabilities
for the use of this document and the information contained
herein, and assumes no responsibility for any errors which
may appear in this document, nor does Intel make a
commitment to update the information contained herein. Intel
reserves the right to make changes to this document at any
time, without notice.
****************************************************************************
****************************************************************************
* Third-party brands and names are the property of their
respective owners.
Copyright (c) Intel Corporation, 1997-2000
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.