This package is a port of the JFFS2 flash filing system to eCos. It has been developed on the Compaq Ipaq, and has not been tested on any other device. This code is subject to the original licensing terms, and additionally it should be noted that this code is still in an early stage of development. As this code will write to flash directly, caution should be exercised in its use. It may cause areas of the flash chips essential to the operation of the device to become corrupted. Minor modifications are necessary to the the eCos flash drivers io/flash/current/src/flash.c devs/flash/intel/strata/current/src/flash_program_buf.c to allow byte aligned rather than word aligned writes, and to ensure overwriting an existing word is successful (these are supplied in jffs2/current/src). Two test files are included fileio1.c (which performs the same tests as used for eCos RamFS), and romfileio1.c (tests as eCos RomFS). romfileio1.c requires that a jffs2 filesystem image jffs2.img is present at the desired mount point. This image was prepared on Linux with the tools originating with JFFS2 source from www.infradead.orgDownload Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.