Auerswald USB kernel driver =========================== What is it? What can I do with it? ================================== The auerswald USB kernel driver connects your linux 2.4.x system to the auerswald usb-enabled devices. There are two types of auerswald usb devices: a) small PBX systems (ISDN) b) COMfort system telephones (ISDN) The driver installation creates the devices /dev/usb/auer0..15. These devices carry a vendor- specific protocol. You may run all auerswald java software on it. The java software needs a native library "libAuerUsbJNINative.so" installed on your system. This library is available from auerswald and shipped as part of the java software. You may create the devices with: mknod -m 666 /dev/usb/auer0 c 180 112 ... mknod -m 666 /dev/usb/auer15 c 180 127 ISDN support ============ If you enable CONFIG_USB_AUERISDN, you will get full ISDN modem support via the HISAX ISDN4LINUX driver. Of course, as for every USB-based ISDN adaptor, you will have to modify your hotplug scripts to load the isdn subsystem and configure the network interfaces. Same procedure as for the ST5481 driver. The maintainer of this driver is wolfgang@iksw-muees.deDownload Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.