[This file is cloned from VesaFB/matroxfb] What is sa1100fb? ================= This is a driver for a graphic framebuffer for the SA-1100 LCD controller. Configuration ============== For most common passive displays, giving the option video=sa1100:bpp:<value>,lccr0:<value>,lccr1:<value>,lccr2:<value>,lccr3:<value> on the kernel command line should be enough to configure the controller. The bits per pixel (bpp) value should be 4, 8, 12, or 16. LCCR values are display-specific and should be computed as documented in the SA-1100 Developer's Manual, Section 11.7. Dual-panel displays are supported as long as the SDS bit is set in LCCR0; GPIO<9:2> are used for the lower panel. For active displays or displays requiring additional configuration (controlling backlights, powering on the LCD, etc.), the command line options may not be enough to configure the display. Adding sections to sa1100fb_init_fbinfo(), sa1100fb_activate_var(), sa1100fb_disable_lcd_controller(), and sa1100fb_enable_lcd_controller() will probably be necessary. Accepted options: bpp:<value> Configure for <value> bits per pixel lccr0:<value> Configure LCD control register 0 (11.7.3) lccr1:<value> Configure LCD control register 1 (11.7.4) lccr2:<value> Configure LCD control register 2 (11.7.5) lccr3:<value> Configure LCD control register 3 (11.7.6) -- Mark Huang <mhuang@livetoy.com>Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.