32-bit CardBus 10/100 Ethernet NDIS2 Drivers
Installation for LANtastic 6.0
================================================
In this driver release, the NDIS2 drivers are provided for
the Lantastic 6.0 installation.
The NDIS2 driver CB8139.DOS, is located in subdirectory \NDIS
And it's used for Lantastic for DOS and Windows installation
DRIVER LOCATION : \NDIS\CB8139.DOS
The information covers the following two topics:
* Installing NDIS2 driver for Lantastic 6.0 for Windows 3.1x
* Installing NDIS2 driver for Lantastic 6.0 for DOS
Please also refer to the \NDIS\README.TXT file for the
optional keywords defined for CB8139.DOS and to be specified
in PROTOCOL.INI.
For Widnows 3.1x installation :
-------------------------------
1. Insert Lantastic INSTALL diskette in drive A:. Then type
INSTALL from your drive A:.
2. Follow the on-screen installation procedures until you
reach the "Select network adapter" screen.
3. Select "NDIS Support for Network Adapters" and press "OK"
button.
4. You will be prompted for entering driver directory on the
"Enter NDIS driver directory" screen. Remove the
Lantastic diskette from drive A: and insert the adapter
driver diskette. Type
A:\NDIS
5. The system will copy the necessary driver files from the
driver diskette into your Lantastic system directory.
6. Complete the rest of the installation.
For DOS installation :
----------------------
1. Insert Lantastic INSTALL diskette in drive A:. Then type
INSTALL from your drive A:.
2. Follow the on-screen installation procedures until you
reach the the network adapter installation screen.
3. Select "NDIS Support for Network Adapters" and press
<Enter> key.
4. You will be prompted for entering driver directory on the
"Install the NDIS driver for your Network Adapter"
screen. Remove the Lantastic diskette from drive A: and
insert the adapter driver diskette. Type
--------> A:\NDIS
5. The system will copy the necessary driver files from the
driver diskette into your Lantastic system directory.
6. Complete the rest of the installation.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.