README This disk contains the modem INF file for Windows95, WindowsNT4.0. Installation *Plug&Play modem under Windows95: If your modem card is external type, use Windows95's Start button, then select Settings/Control Panel/System, under System, select Device Manager, then select Refresh button. If your modem is internal type, just plug in the modem and power on the PC. Windows95 will prompt you a new hardware have been found and request for driver. Please select Driver from manufacture and insert this driver disk. *Internal Plug&Play modem under DOS: Insert your modem into PC correctly. If your PC do not support Plug&Play BIOS, then your modem card may not work correctly. Please run setpnp.exe included in this disk to set the modem to desired comm port. For more information about setpnp.exe please see setpnp.txt. *Non Plug&Play modem under Windows95 & WindowsNT4.0: Insert your modem into PC correctly(internal) or connect to serial port of your PC(external). Push Windows95's Start button, then select Settings/Control Panel/Modem, under Modem, Select Add, then check the "Don't auto detect modem,..." and push Next, then select Have a disk and push Next. Insert the driver disk and follow the steps. *UNIMODEM V Driver: Unimodem V is the newest release of Unimodem, the Windows 95 universal modem driver/telephony service provider for data/fax modems. Unimodem V adds the most commonly requested features to support data/fax/voice modems, including wave playback and recording to and from the phone line, wave playback and recording to and from the handset, and support for speakerphones, caller ID, distinctive ringing, and call forwarding. The unimodem V driver have been integrated into the latest Windows 95 version. If your Windows 95 system doesn't include this unimodem V driver. You can download unimodv.exe file on the Microsoft ftp site (ftp.microsoft.com or 18.104.22.168) in the \softlib\mslfiles directory. Caution: WindowsNT4.0 do not support Plug&Play modem. Please use legacy modem instead.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.