LANTASTI.TXT Driver File Contents (DFE_670TXD.zip)

================================================================
NOTES ON
Installing D-Link DFE-670TXD Fast Ethernet PC Card
For Lantastic users
================================================================
    (c) 2001 Copyright D-Link Corporation ALL RIGHTS RESERVED


This document contains DFE-670TXD Fast Ethernet PC Card installation notes,
which is not included in the DFE-670TXD Fast Ethernet PC Card USER'S GUIDE
or onscreen instructions, for Lantastic users.


This document contains information on the following topics:

1.0   Overview
2.0   Installation Notes
3.0   Example Configuration File
________________________________________________________________________

1.0  Overview
-------------
    To install the DFE-670TXD Fast Ethernet PC Card driver,
    Lantastic 6.0 users please also refer to the following:

    --------------------------------------------------------------------
    File                            Description/Installation Notes
    --------------------------------------------------------------------
    INST_DOS.TXT                    Overall Installation for DOS users,
                                    including users of Windows 3.1/3.11.
    \HELP\NDIS2DOS\README.TXT       Overall installation notes for all
                                    NDIS users


2.0  Installation Notes
-----------------------
  There are two methods to install DFE-670TXD Fast Ethernet PC Card drivers.

    2.1  Method 1
    -------------
        To install NDIS driver "DFE670.DOS", user can use Lantastic 6.0
        install program, and select "NDIS support for network adapters"
        then type path "D:\NDIS2" (specify by install program).
        Install program will search "DFE670.DOS" and "PROTOCOL.INI"
        and copy these two files to target directory.

    2.2  Method 2
    -------------
        If user already installed Lantastic 6.0 and want to install
        D-Link DFE-670TXD Fast Ethernet PC Card, just replace AEXNDIS.DOS
        with NDIS driver "DFE670.DOS" at CONFIG.SYS


3.0  Example Configuration File
-------------------------------
       NOTE: "DFE670.DOS" is an NDIS driver supported by Vendor.
             "AEXNDIS.DOS" is an NDIS driver supported by ARTISOFT

             *** CONFIG.SYS ***
             DEVICE=C:\LANTASTI\PROTMAN.DOS /I:C:\LANTASTI
             --------------------------------------------------------
             DEVICE=C:\LANTASTI\AEXNDIS.DOS  -------> By Lantastic

             * please replace to *

             DEVICE=C:\LANTASTI\DFE670.DOS   -------> By Vendor
             --------------------------------------------------------


             *** STARTNET.BAT ***
             @echo ===== Begin Lantastic configuration =====
             SET LAN_CFG=C:\LANTASTI
             PATH C:\LANTASTI;%PATH%
             SET LAN_DIR=C:\LANTASTI.NET
             rem Please obtain the NETBEUI.EXE program from Microsoft
             NETBEUI
             --------------------------------------------------------
             AI-NDIS BIND_TO=AEXNDIS_NIF

             * please replace to *

             AI-NDIS BIND_TO=DFE670_NIF
             --------------------------------------------------------
             AILANBIO @STARTNET.CFG
             REDIR  LANTA @STARTNET.CFG
             SERVER C:\LANTASTI.NET @STARTNET.CFG
             NET LOGIN \\LANTA
             @echo ===== End LANtastic configuration =====


             *** Protocol.ini ***
             [NETBEUI_XIF]
                 DriverName = netbeui$
                 Sessions = 6
                 NCBS = 12
             --------------------------------------------------------
                 Bindings = AEXNDIS_NIF

                 * please replace to *

                 Bindings = DFE670_NIF
             --------------------------------------------------------
                 LANABASE = 1
             --------------------------------------------------------
             [AEXNDIS_NIF]
                 DRIVERNAME = AEXNDIS$

                 * please replace to *

             [DFE670_NIF]
                 DRIVERNAME = DFE670$
             --------------------------------------------------------

Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web4, load: 1.29