CLOCK77/NT Version 1.94 ================================================================== Inhalt - Was ist neu ? - Support - Updates ------------------------------------------------------------------ Was ist neu ? ------------------------------------------------------------------ V1.94 ( 15.2.2005 ) o Time-Kernel: Filter Funktion o Clock77.EXE: Log-Funktion o Clock77.EXE: Diverses V1.40 ( 2.1.2001 ) o Time-Kernel: Problem dass auf einigen Boards zur Anzeige des Jahres 2000 führte behoben. o Monitor: Bei starken Zeitabweichungen benötigte die Zeichenroutine zu viel Prozessorzeit. V1.30 ( 3.5.1999 ) o Time-Kernel: Die Clock77-Software ist jetzt vollständig Jahr-2000-tauglich. o Setup: Die Verknüpfung auf Clock77 wird jetzt zusätzlich unter Start|Programme|Autostart angelegt. Damit steht das Monitorpro- gramm nach der Anmeldung in der Taskleiste zur Verfügung. o Setup: Die Installation des Treibers sollte jetzt auf allen NT-Systemen korrekt durchgeführt werden. ------------------------------------------------------------------ Hinweise ------------------------------------------------------------------ o Sollte die Länge der Zuleitung zum Empfänger nicht ausreichend sein, so kann diese bis auf 20m verlängert werden. Hierzu wird eine dreiadrige Leitung verwendet, mit der die Pins 1,2 und 9 1:1 verbunden werden. o Auf Anfrage ist auch eine Verstärkerbox lieferbar mit der sich die Kabellänge auf über 1000m verlängern lässt. ------------------------------------------------------------------ Support ------------------------------------------------------------------ Bei Fragen wenden Sie sich bitte an folgende Email-Adresse: support@quancom.de Als Betreff bzw. Subject geben Sie bitte folgende Zeile an: CLOCK77/NT Support ------------------------------------------------------------------ Updates ------------------------------------------------------------------ Aktuelle Versionen der CLOCK77-Software bzw. Updates finden Sie auf unserer Homepage im Internet unter www.quancom.de ================================================================== 03-05-00 Dipl.-Ing. (FH) Markus Jakubasch QUANCOM Informationssysteme GmbH Abt. Entwicklung & Support email: jakubasch@quancom.de 02-01-01 Michael Reimer QUANCOM Informationssysteme GmbHDownload Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.