1. pc_funkuhr_195.zip Driver
2. clk77usb.inf File Contents

clk77usb.inf Driver File Contents (pc_funkuhr_195.zip)

[Version]
Signature="$Windows 95$"
Provider=%ProviderName%

LayoutFile  = layout.inf
Class = System
ClassGuid = {4d36e97d-e325-11ce-bfc1-08002be10318} 
DriverVer=02/10/2005,1.9.4.4
CatalogFile = quancom.cat



;--------- SourceDiskNames and SourceDiskFiles Section -----------------------

; These sections identify source disks and files for installation.  They are
; shown here as an example, but commented out.

;[SourceDisksNames]
;1 = "Install Disk",Disk1,,

;[SourceDisksFiles]
;Clk77Usb.sys = 1,,

;--------- ClassInstall/ClassInstall32 Section -------------------------------

; Not necessary if using a standard class

; 9X Style
[ClassInstall]
Addreg=Class_AddReg

; NT Style
[ClassInstall32]
Addreg=Class_AddReg

[Class_AddReg]
HKR,,,,%DeviceClassName%
HKR,,Icon,,0

;--------- DestinationDirs Section -------------------------------------------

[DestinationDirs]
Clk77Usb_Files_Driver = 10,System32\Drivers

;--------- Manufacturer and Models Sections ----------------------------------

[Manufacturer]
%MfgName%=Mfg0

[Mfg0]

; PCI hardware IDs use the form
;   PCI\VEN_aaaa&DEV_bbbb&SUBSYS_cccccccc&REV_dd

%String1%=Clk77Usb_DDI, USB\VID_0A7C&PID_0008

;---------- DDInstall Sections ( USB Modules ) -----------------------------------------------
; --------- Windows 9X -----------------

; Experimentation has shown that DDInstall root names greater than 19 characters
; cause problems in Windows 98

[Clk77Usb_DDI]
CopyFiles=Clk77Usb_Files_Driver
AddReg=Clk77Usb_9X_AddReg

[Clk77Usb_9X_AddReg]
HKR,,DevLoader,,*ntkern
HKR,,NTMPDriver,,Clk77Usb.sys
HKR, "Parameters", "BreakOnEntry", 0x00010001, 0
HKR, "Parameters", "Mode", 0x00010001, 0x0000

; --------- Windows NT -----------------

[Clk77Usb_DDI.NT]
CopyFiles=Clk77Usb_Files_Driver
AddReg=Clk77Usb_NT_AddReg

[Clk77Usb_DDI.NT.Services]
Addservice = Clk77Usb, 0x00000002, Clk77Usb_AddService

[Clk77Usb_AddService]
DisplayName    = %UsbDesc%
ServiceType    = 1                  ; SERVICE_KERNEL_DRIVER
StartType      = 3                  ; SERVICE_DEMAND_START
ErrorControl   = 1                  ; SERVICE_ERROR_NORMAL
ServiceBinary  = %10%\System32\Drivers\Clk77Usb.sys

[Clk77Usb_NT_AddReg]
HKLM, "System\CurrentControlSet\Services\Clk77Usb\Parameters",\
	"BreakOnEntry", 0x00010001, 0
HKLM, "System\CurrentControlSet\Services\Clk77Usb\Parameters",\
	"Mode", 0x00010001, 0x0000


; --------- Files (common) -------------

[Clk77Usb_Files_Driver]
Clk77Usb.sys

;--------- Strings Section ---------------------------------------------------

[Strings]
ProviderName="QUANCOM"
MfgName="QUANCOM Informationssysteme GmbH"
UsbDesc="Clock77/USB Funkuhr"
DeviceClassName="System"
String1="Clock77/USB"
CardDesc="Driver for USB Clock77"