+==============================================================================+ BIOS CORE Version ................ Insyde BIOS CPUs Supported ................ Dothan / Banias / Celeron-M Chipset ................ Intel 855GME+ Bridge ................ ICH4-M Super I/O ................ SMC217 PCMCIA ................ ENE CB-1420 Cardbus controller Video ................ ATI M11 (FL322) Intel 855GME+(FL324) On-board Audio ................ RealTek ALC202A AC'97 Audio On-board LAN ................ Broadcom BCM4401/BCM5788 KBC ................ ENE 910 1394 controller ................ TI TSB43AB22 +==============================================================================+ +==============================================================================+ | MODEL NO. : DFL322 RELEASE DATE : 04/27/2004 | |------------------------------------------------------------------------------| | Major Version : 1.30 CPU u-code Version: | | KBC BIOS Version : 1.30 MU2069401 - Banias A1 stepping | | ATI M11 VGA BIOS : VER008.011.001.102 M2069505 - Banias B1 stepping | | ATI M9+X VGA BIOS : VER008.017M.145.000 M206D109 - Dothan A1 stepping | | 855GME+ VGA BIOS : 3104 M206D210 - Dothan A2 stepping | | Flash Utility Ver.: 0.20A M206D617 - Dothan B1 stepping | | Checksum (ROM) : 9E5Eh M8069545 - Banias Celeron B1 | +==============================================================================+ SYS BIOS: 1.Add Dothan B1 stepping support EC BIOS: 1.Implement power team solution for Notes issue CC095: (D2,3,4)Battery discharge to 0% at 0 degree chamber then plug in AC, battery LED will flash amber light. +==============================================================================+ | MODEL NO. : DFL322 RELEASE DATE : 04/20/2004 | |------------------------------------------------------------------------------| | Major Version : 1.20 CPU u-code Version: | | KBC BIOS Version : 1.20 MU2069401 - Banias A1 stepping | | ATI VGA BIOS : VER008.011.001.102 MU2069505 - Banias B1 stepping | | 855GME+ VGA BIOS : 3104 MU206D109 - Dothan A1 stepping | | Flash Utility Ver.: 0.20A MU206D210 - Dothan A2 stepping | | Checksum (ROM) : BFC6h MU8069545 - Banias Celeron B1 | +==============================================================================+ SYS BIOS: 1. Fix AP can't detect bluetooth after install RCD. EC BIOS: 1. System wake up from s3 will auto-shutdown issue. 2. Pressing power button several times while system is entering hibernation, System will resume and power light will flash with amber light. +==============================================================================+ | MODEL NO. : DFL322 RELEASE DATE : 04/13/2004 | |------------------------------------------------------------------------------| | Major Version : 1.01 CPU u-code Version: | | KBC BIOS Version : 1.01 MU2069401 - Banias A1 stepping | | ATI VGA BIOS : VER008.011.001.102 MU2069505 - Banias B1 stepping | | 855GME+ VGA BIOS : 3104 MU206D109 - Dothan A1 stepping | | Flash Utility Ver.: 0.20A MU206D210 - Dothan A2 stepping | | Checksum (ROM) : 157Fh MU8069545 - Banias Celeron B1 | +==============================================================================+ SYS BIOS: 1. Update VGA bios to fix garbag appear after reboot or s3 resume. 2. Fix SKU 1,3,5 ATAPI model name exceed the frame of devices block in SCU. 3. Implement MAC address of uuid EC BIOS: 1. Notes issue CC113:The LCD auto dim disable function has no function. 2. Notes issue CC095:(D2,3,4)Battery discharge to 0% at 0 degree chamber then plug in AC, battery LED will flash amber light. 3. Remove function:When press stop button for 4 seconds,the IOMP will shut down. 4. Remove function:(IOMP mode)When battery capacity is lower than 10%, the system start to beep. +==============================================================================+ | MODEL NO. : DFL322 RELEASE DATE : 04/05/2004 | |------------------------------------------------------------------------------| | Major Version : 1.00 CPU u-code Version: | | KBC BIOS Version : 1.00 MU2069401 - Banias A1 stepping | | ATI VGA BIOS : VER008.011.001.102 MU2069505 - Banias B1 stepping | | 855GME+ VGA BIOS : 3104 MU206D109 - Dothan A1 stepping | | Flash Utility Ver.: 0.20A MU206D210 - Dothan A2 stepping | | Checksum (ROM) : 3908h MU8069545 - Banias Celeron B1 | +==============================================================================+ SYS BIOS: 1. Remove Setup item "USB Mass Storage" 2. Modify the position of memory block in SCU. 3. Fix SKU6 can't runing amidiag 4. Make "Password on Boot" item grayly when don't set supervisor 5. Fix system will hang up after exit saving changes in SCU. 6. Fix sometimes can't enter IOMP. 7. Fix dmi utility can't write serial number EC BIOS: 1. Notes issue CC001:(D2) The LCM screen should show " Aspire 2020" not " 2010". 2. Notes issue CC012:System sound will become small to max when disable mute function. 3. Notes issue CC077:When fully discharge with playing the DVD,the system can't boot into windows O.S. 4. Notes issue CC087:(IOMP mode)When battery capacity is lower than 10%, the system doesn't start to beep. 5. Notes issue CC089:(IOMP mode)When press stop button for 4 seconds, the IOMP can't shut down. 6. Notes issue CC095:Battery discharge to 0% at 0 degree chamber then plug in AC, battery LED will flash amber light. 7. Support command 0x45 data 0xE0 for system bios to disable blue tooth power. 8. Remove system wake up from S3 when Lid switch open. +==============================================================================+ | MODEL NO. : DFL322 RELEASE DATE : 03/30/2004 | |------------------------------------------------------------------------------| | Major Version : 0.09 CPU u-code Version: | | KBC BIOS Version : 0.09 MU2069401 - Banias A1 stepping | | ATI VGA BIOS : VER008.011.001.102 MU2069505 - Banias B1 stepping | | 855GME+ VGA BIOS : 3104 MU206D109 - Dothan A1 stepping | | Flash Utility Ver.: 0.20A MU206D210 - Dothan A2 stepping | | Checksum (ROM) : AA18h MU8069545 - Banias Celeron B1 | +==============================================================================+ SYS BIOS: 1. Modify the position of memory block in SCU 2. Remove APIC item in SCU 3. Update VGA bios to fix garbag appear after reboot or s3 resume 4. Chage the delay of cdrom bootting from 100 ms to 200 ms 5. Notify OS switch back to Windows screen out of S4 EC BIOS: 1. Modify Number Lock function to for new ABO SPEC. 2. Modify sub-woofer key equal Fn key in Drogo-3 and Drogo-4. 3. Implement System wake up from S3 when Lid switch open. 4. Modify LCM default word "Aspire 2020" +==============================================================================+ | MODEL NO. : DFL322 RELEASE DATE : 03/23/2004 | |------------------------------------------------------------------------------| | Major Version : 0.08 CPU u-code Version: | | KBC BIOS Version : 0.08 MU2069401 - Banias A1 stepping | | ATI VGA BIOS : VER008.011.001.102 MU2069505 - Banias B1 stepping | | 855GME+ VGA BIOS : 3104 MU206D109 - Dothan A1 stepping | | Flash Utility Ver.: 0.20A MU206D210 - Dothan A2 stepping | | Checksum (ROM) : 9BA4h MU8069545 - Banias Celeron B1 | | FLASHIT XXXX.ROM /ALLB | +==============================================================================+ SYS BIOS: 1. Update the product name in DMI and SCU STRING 2. Change the position of "Password on Boot" in SCU 3. Fix reboot & S3 issue EC BIOS: 1. Notes issue BC033:In the dos mode the keyboard founction is abnormal. 2. It is for SM_BUS1 sometime will be lock when plug battery SMB reading tooling Due to SMB1 map to SCL1/SDA1 and SCL2/SDA2 in Reg"SMBPIN",just monitor SMB1 3. Fixed ESCD shutdown issue. 4. Alt+Ctrl+Del(warm boot) casue Alt key lock. 5. ALT+CTRL+DEL warmboot in DOS cause CTRL key lock. 6. EC_ON assert low and System shutdown when plug-out AC after BIOS flash restart. 7. IKB timeout cause firmware scan code send to Host incompletely. +==============================================================================+ | MODEL NO. : DFL322 RELEASE DATE : 03/16/2004 | |------------------------------------------------------------------------------| | Major Version : 0.07 CPU u-code Version: | | KBC BIOS Version : 0.07 MU2069401 - Banias A1 stepping | | ATI VGA BIOS : VER008.011.001.102 MU2069505 - Banias B1 stepping | | 855GME+ VGA BIOS : 3104 MU206D109 - Dothan A1 stepping | | Flash Utility Ver.: 0.20A MU206D210 - Dothan A2 stepping | | Checksum (ROM) : A72Ah MU8069545 - Banias Celeron B1 | | FLASHIT XXXX.ROM /ALLB | +==============================================================================+ SYS BIOS: 1. Int 15 ax9610 bl=35 WLAN function ax9610 bl=10 UMA panel type = 1028x800 ax9610 bl=36 VGA type ax9610 bl=12 Project Name 2. Remove TV out function of Fn+F5 3. Modify biglogo & osb for sw spec definition 4. Add Celeron M osb support 5. change the copyright declear from "1983 - 2002" to "1983 - 2004" 6. Exchange the position of "Set User password" & "Set Supervisor password" in SCU. 7. Fix reboot fail 8. Fix crisis has no screen EC BIOS: 1. Notes issue BC135:Press power switch "more then 2 times" to power on system, system will hang on. (LCD no display, power LED is on) 2. Notes issue BC139:(D2) When disable the low battery sound alarm , the sound alarm still can be heard. 3. Delay 300ms when SPB and SWI wake up from S3. +==============================================================================+ | MODEL NO. : DFL322 RELEASE DATE : 03/11/2004 | |------------------------------------------------------------------------------| | Major Version : 0.06 CPU u-code Version: | | KBC BIOS Version : 0.06 MU2069401 - Banias A1 stepping | | ATI VGA BIOS : VER008.011.001.102 MU2069505 - Banias B1 stepping | | 855GME+ VGA BIOS : 3104 MU206D109 - Dothan A1 stepping | | Flash Utility Ver.: 0.20A MU206D210 - Dothan A2 stepping | | Checksum (ROM) : 9B2Fh MU8069545 - Banias Celeron B1 | | FLASHIT XXXX.ROM /ALLB /C (Bootblock update) (cmos update) | +==============================================================================+ SYS BIOS: 1. fix any key wake up faile when getting into S3 and keyboard pressing down 2. FIR disable funtion fault 3. Swith CPU to low speed when entering IOMP Disable Bluetooth and Wireless Lan Power with IOMP playing USE cmosIOMPcheck boot. can remove EC command ACESS. 4. Change USB mass storage boot default to Disable. Resovled IOMP can't boot when insert samrt media card 5. Implement subbrand detection function of acer oem int 15 6. Add centrino logo support EC BIOS: 1. Modify hot key Fn+F8 for H/W team to fix noise and volumn issue. 2. Support CMD 0x45 DAT 0xF0 for Launch Manager to know the project ID. +==============================================================================+ | MODEL NO. : DFL322 RELEASE DATE : 03/03/2004 | |------------------------------------------------------------------------------| | Major Version : 0.05 CPU u-code Version: | | KBC BIOS Version : 0.05 MU2069401 - Banias A1 stepping | | ATI VGA BIOS : VER008.011.001.102 MU2069505 - Banias B1 stepping | | 855GME+ VGA BIOS : 3104 MU206D109 - Dothan A1 stepping | | Flash Utility Ver.: 0.20A MU206D210 - Dothan A2 stepping | | Checksum (ROM) : 0414h MU8069545 - Banias Celeron B1 | +==============================================================================+ SYS BIOS: 1. Fix the Quiet boot setting up in cmos default 2. modify the title "Quite" to "Quiet" in scu menu 3. Update VGA bios, it fix the issue that press F12 continously will appear garbage. 4. Add PNP IDs for touch pad. 5. Fix LCM time not display issue. 6. Fix the sequence of boot in cmos default 7. Fix TV out function can't work 8. switch on IOMP EC BIOS: 1. Notes issue BC043,BC078: Sub-woofer on/off function can not be control by hot key. Solution: At the beginning, the drongo type is defined by board ID, it will be defined by project ID now. 2. Notes issue BC074:Power LED always flashing with amber color. Solution: Don't store the flash flag into EEPROM. 3. H/W team require: When power off system or entry suspend, the MUTE_WOOFER# pin will active at the first. 4. Implement battery parameter item 9. 5. SW team require: When cover switch be Opened, EC doesn't sent out event to system bios for fixing notes issue BC092. +==============================================================================+ | MODEL NO. : DFL322 RELEASE DATE : 02/25/2004 | |------------------------------------------------------------------------------| | Major Version : 0.04 CPU u-code Version: | | KBC BIOS Version : 0.04 MU2069401 - Banias A1 stepping | | ATI VGA BIOS : VER008.011.001.102 MU2069505 - Banias B1 stepping | | 855GME+ VGA BIOS : 3104 MU206D109 - Dothan A1 stepping | | Flash Utility Ver.: 0.20A MU206D210 - Dothan A2 stepping | | Checksum (ROM) : BADCh MU8069545 - Banias Celeron B1 | +==============================================================================+ SYS BIOS: 1. Correct ATI M11 VGA BIOS version in SCU 2. Fix 1394 can't connect other NB after S3 resume 3. Change enable/disable key from "enter" to "space" in SCU 4. Implement Fn+F5 function 5. Enable L2 cahe size 2M for Dothan CPU (reduce memory thermal) 6. Support thermal utility 2.0 7. Fix VGA memory item has no information on SCU 8. Support PXE lan boot 9. add Intel wireless b+g in ACER Int15 wireless function EC BIOS: 1. Note issue AC057:[D3,D4]The system does not show "No support Sub-woofer" when perssed hot key of Sub-woofer. 2. Note issue AC011:(Drongo2&3&4)The SUSP LED(amber color) will keep flashing when system is at idle status. 3. Note issue AC037:(Drong 2)The Audio button founction appears abnormal. 4. H/w change the voltage of board id. +==============================================================================+ | MODEL NO. : DFL322 RELEASE DATE : 02/18/2004 | |------------------------------------------------------------------------------| | Major Version : 0.03 CPU u-code Version: | | KBC BIOS Version : 0.03 MU2069101 - Banias A1 stepping | | ATI VGA BIOS : XXXX MU2069402 - Banias B0 stepping | | 855GME+ VGA BIOS : 3104 MU2069505 - Banias B1 stepping | | Flash Utility Ver.: 0.20A MU206D006 - Dothan A0 | | Checksum (ROM) : F7FCh MU206D109 - Dothan A1 | +==============================================================================+ SYS BIOS: DFL32-031 [MK006] Add Intel wireless b+g card DFL32-027 [IS005] 1. Disable internal VGA in bootblock 2. Disable shared memory function DFL32-026 [JH015] Fix thermal utility can't run DFL32-025 [JH014] Fix power status display abnormally when AC IN/OUT on power meter & right_down screen. DFL32-024 [JH013] Add "USB Mass Storage" item for enable/disabl the function on SCU. DFL32-023 [IS004] Add usb mass storage boot function DFL32-022 [IS003] Fix when resume from S3, system will crash. DFL32-021 [JH012] Modify project ID EC BIOS: 1. Note issue AC036:The definition of the one touch button on power board is different from Launch Manager. Solution:EC code swap the two buttons. 2. Support scan code for driver to show message about no sub-woofer. 3. Implement battery parameter except item 9 and 2.2 +==============================================================================+ | MODEL NO. : DFL322 RELEASE DATE : 02/11/2004 | |------------------------------------------------------------------------------| | Major Version : 0.02 CPU u-code Version: | | KBC BIOS Version : 0.02 MU2069101 - Banias A1 stepping | | ATI VGA BIOS : XXXX MU2069402 - Banias B0 stepping | | 855GME+ VGA BIOS : 3104 MU2069505 - Banias B1 stepping | | Flash Utility Ver.: 0.20A MU206D006 - Dothan A0 | | Checksum (ROM) : F70Eh MU206D109 - Dothan A1 | +==============================================================================+ SYS BIOS: DFL32-020 [JH011] Fix HotKey(Fn+F7) can't enable/disable touchpad DFL32-019 [JH010] Add thermal utility support DFL32-018 [Mk004] Add CPU C4 support CST DFL32-017 [JH009] Fix cardbus can't work DFL32-016 [JH008] Modify PCI IRQ routing table DFL32-014 [JH006] Fix launch manager can't find wireless lan device DFL32-013 [IS002] Fix DFL322 restart crash EC BIOS: 1. After the KB910Q B4 chip is being powered on,the DPLL is default to be disabled. The fireware should enable the internal DPLL after 3 seconds after power-on. 2. H/W change power sequence: When SUSP# pin is high,VR_ON pin will high after 20ms. +==============================================================================+ | MODEL NO. : DFL322 RELEASE DATE : 02/05/2004 | |------------------------------------------------------------------------------| | Major Version : 0.01 CPU u-code Version: | | KBC BIOS Version : 0.01 MU2069101 - Banias A1 stepping | | ATI VGA BIOS : XXXX MU2069402 - Banias B0 stepping | | 855GME+ VGA BIOS : 3104 MU2069505 - Banias B1 stepping | | Flash Utility Ver.: 0.19A MU206D006 - Dothan A0 | | Checksum (ROM) : 2C41h MU206D109 - Dothan A1 | +==============================================================================+ SYS BIOS: DFL32-006 [JH003] Fix that COM, LPT & FIR disappear in WinXP DFL32-005 [JH002] Add IEEE 1394 GUID initializtion DFL32-004 [JH001] Add ssid DFL32-003 [JS002] Add Winbond 39L040 512KB ROM Part. EC BIOS: 1. Fix power,e_main... LED can't turn on. 2. H/W team ask to swap dot_cs pin and dot_rs pin.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.