Overview
The purpose of this file is to allow for the Manual installation of
Windows NT4.0 Workstation or Server with the SMC PCI Adapters.
Supported Adapters:
SMC1211TX 10/100
This software distribution has unattended files and sample scripts
for WindowsNT 4.0 Workstation and Server.
The sample Unattended script is:
WindowsNT 4.0 Workstation/Server = /UNATTEND.TXT
The WindowsNT 4.0 Workstation/Server script has been designed to install NT with
the following options: (your site could have different requirements)
· FileSystem ===> FAT
· Workgroup ===> WORKGROUP, ie not into a DOMAIN
· NT root directory ===> \WINNT40
· Networking protocols used ===> NetBEUI, IPX
Note : For best results with multiple machines it is recommended that you
use this file in conjunction with an UDF file to customize
options such "ComputerName" and "FullName".
Installation Steps:
1) Extract the Compress file.
2) Create a new Subdirectory structure on your Network Installation Server
within the WindowsNT distribution share point. The new directory structure
is shown in the Example below:
EXAMPLE: F:\WINNT\i386 - Distribution Share Point on Server
ADD: \$OEM$\NET\SMC - Directory Structure
The directory structure once completed should look like this:
EXAMPLE: F:\WINNT\I386\$OEM$\NET\SMC
3) Copy the SMC Drivers into the new SMC subdirectory:
EXAMPLE: UNATTEND.TXT
SMC1211.SYS
OEMSETUP.INF
4) If you are using your own Unattend.txt file please take note of the
sections below. Please add these sections to your existing script
file:
[Unattended]
OemPreinstall = yes
[Network]
InstallAdapters = SelectedAdaptersSection
[SelectedAdaptersSection]
SMC1211 = OEMAdapterParamSection, \$OEM$\NET\SMC
[OEMAdapterParamSection]
Command line execution
Start NT installation with the following command line
{source}\winnt.exe /B /S:{source} /U:{source}\$OEM$\NET\SMC\UNATTEND.TXT.
Where {source} is the source drive and source directory on the distribution
software server. In this example the share point directory is called
F:\WINNT\I386.
This Example assumes that it is executed from within the I386 Directory.
EXAMPLE: WINNT /B /S:F:\WINNT\I386 /U:F:\WINNT\I386\$OEM$\NET\SMC\UNATTEND.TXT
For further information on using attended installation with Microsoft
Windows NT Workstation or Server see Windows NT Resource Kit or contact
Microsoft Corporation.
SMC Networks, Inc.
This commercial computer software and documentation is provided with RESTRICTED
RIGHTS. Use, duplication, or disclosure by the Government is subject to
restrictions set forth in subparagraph (c) (1) (ii) of the Rights in Technical
Data and Computer Software clause at DFARS 252.227-7013, or subparagraphs (c)
(1) and (2) of the Commercial Computer Software -- Restricted Rights clause at
FAR 52.227-19, or Alternate III of the Rights in Data - General clause at FAR
52.227-14, as applicable. The manufacturer / subcontractor is SMC Networks, Inc.
6 Hughes, Irvine CA.
SMC and Standard Microsystems are registered trademarks; and EtherPower, EtherPower^2,
EtherPower 10/100, EZStart, and SuperDisk are trademarks of Standard Microsystems
Corporation. Other product and company names are registered trademarks or trademarks
of their respective holders.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.