This PC program basically performs in-circuit programmming of the CC1010 FLASH memory.
It implements a full SPI protocol and a synchronous serial link between the PC parallel
port and the CC1010 SPI port. To use this program, please do the following installation
procedure first:
1. Make sure your OS platform is MS Windows95/98, or MS Windows NT/2000/XP.
2. Extract CCPROG.EXE to location of your choice.
(Chipcon prefers C:\Program Files\Chipcon\Flash Programmer)
3. Extract CCPPORT.DLL to Windows directory (C:\WINNT).
4. Extract TVICPORT.VXD to Windows System directory (C:\WINNT\system32).
5. Extract TVICPORT.SYS to Windows Driver directory (C:\WINNT\system32\drivers).
If you have problems installing or using the CC1010 in-circuit FLASH programmer, please
contact Chipcon:
Chipcon AS
Gaustadalléen 21
N-0349 OSLO
NORWAY
Telephone : (+47) 22 95 85 44
Support line : (+47) 22 95 85 45
Fax : (+47) 22 95 85 46
email : support@chipcon.com
web : http://www.chipcon.com
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.