XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
X Company: CHIPCON AS X
X Address: Gaustadalléen 21 0349 OSLO X
X X
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
PCB NAME : CC1010EM
REVISION: 3.0
FILE: CC1010EM_REFERENCE_DESIGN_3_0.ZIP PACKED WITH WinZIP V.8.1
PCB DECRIPTION: 4 LAYER PCB 1.6 MM
1-2 0.25 MM
2-3 1.0 MM
3-4 0.25 MM
Dimensions in mil (0.001 inch)
DOUBLE SIDE SOLDER MASK,
SINGLE SIDE SILKSCREEN,
8 MIL MIN TRACE WIDTH AND 8 MIL MIN ISOLATION.
FILE NAME DESCRIPTION FILE TYPE
***PCB MANUFACTURING FILES:
L1.SPL LAYER 1 COMPONENT SIDE/POSITIVE EXT. GERBER
L2.SPL LAYER 2 GROUND PLANE/NEGATIVE EXT. GERBER
L3.SPL LAYER 3 VCC ROUTING/POSITIVE EXT. GERBER
L4.SPL LAYER 2 SOLDER SIDE/POSITIVE EXT. GERBER
STOPCOMP.SPL SOLDER MASK COMPONENT SIDE/NEGATIVE EXT. GERBER
STOPSOLD.SPL SOLDER MASK SOLDER SIDE/NEGATIVE EXT. GERBER
SILKCOMP.SPL SILKSCREEN COMPONENT SIDE/POSITIVE EXT. GERBER
SILKSOLD.SPL SILKSCREEN SOLDER SIDE/POSITIVE EXT. GERBER
NCDRILL.SPL NC DRILL THROUGH HOLE EXCELLON
NCDRILL.REP NC DRILL REPORT ASCII
DRILL.SPL DRILL/MECHANICAL DRAWING EXT. GERBER
DRILL.REP DRILL REPORT ASCII
NOR01.USR EXTENDED GERBER APERTURE TABLE ASCII
CNC.USR NC DRILL DEVICE FILE ASCII
README.TXT THIS FILE ASCII
***PCB ASSEMBLY FILES:
PARTLIST_433.TXT PART LIST, edited, 433 MHz ASCII
PARTLIST_868.TXT PART LIST, edited, 868/915 MHz ASCII
BOM_433.TXT BOM, edited, 433 MHz ASCII
BOM_868.TXT BOM, edited, 868/915 MHz ASCII
PASTCOMP.SPL SOLDER PASTE COMPONENT SIDE EXT. GERBER
PASTSOLD.SPL SOLDER PASTE SOLDER SIDE EXT. GERBER
ASSYCOMP.SPL ASSEMBLY DRAWING COMPONENT SIDE EXT. GERBER
***DESIGN FILES:
CC1010EM_3_0.SCM CADSTAR SCHEMATIC FILE BINARY
CC1010EM_3_0.PCB CADSTAR PCB FILE BINARY
CC1010EM_3_0.CPA CADSTAR PCB FILE (ARCHEIVE) ASCII
END.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.