XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
X Company: CHIPCON AS X
X Address: Gaustadalléen 21 0349 OSLO X
X X
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
PCB NAME : CC2420DB
REVISION: 1.2
FILE: CC2420DB_REFERENCE_DESIGN_1_3.ZIP PACKED WITH WinZIP V.8.0
PCB DESCRIPTION: 4 LAYER PCB 1.122 MM Nominal thickness with 35um Cu in each layer
1-2 0.321 MM DIELECTRIC FR4
2-3 0.340 MM DIELECTRIC FR4
3-4 0.321 MM DIELECTRIC FR4
Dielectric constant for FR4 is 4.5
Dimensions in manufacturing files are in mils (0.001 inch)
DOUBLE SIDE SOLDER MASK,
DOUBLE SIDE SILKSCREEN,
5 MIL MIN TRACE WIDTH AND 8 MIL MIN ISOLATION.
FILE NAME DESCRIPTION FILE TYPE
-----------------------------------------------------------------------------------
CC2420DB_REFERENCE_DESIGN_README.TXT THIS FILE ASCII
***PCB MANUFACTURING FILES:
L1.SPL LAYER 1 COMPONENT SIDE/POSITIVE EXT. GERBER
L2.SPL LAYER 2 GROUND PLANE/POSITIVE EXT. GERBER
L3.SPL LAYER 3 POWER PLANE/POSITIVE EXT. GERBER
L4.SPL LAYER 4 SOLDER SIDE/POSITIVE EXT. GERBER
STOPCOMP.SPL SOLDER MASK COMPONENT SIDE/NEGATIVE EXT. GERBER
STOPSOLD.SPL SOLDER MASK SOLDER SIDE/NEGATIVE EXT. GERBER
SILKCOMP.SPL SILKSCREEN COMPONENT SIDE/POSITIVE EXT. GERBER
SILKSOLD.SPL SILKSCREEN SOLDER SIDE/POSITIVE EXT. GERBER
PASTCOMP.SPL SOLDER PASTE COMPONENT SIDE EXT. GERBER
PASTSOLD.SPL SOLDER PASTE SOLDER SIDE EXT. GERBER
DRILL.SPL DRILL/MECHANICAL DRAWING EXT. GERBER
DRILL.REP DRILL REPORT ASCII
NCDRILL.SPL NC DRILL THROUGH HOLE EXCELLON
NCDRILL.REP NC DRILL REPORT ASCII
***PCB ASSEMBLY FILES:
ASSYCOMP.SPL ASSEMBLY DRAWING COMPONENT SIDE EXT. GERBER
ASSYSOLD.SPL ASSEMBLY DRAWING SOLDER SIDE EXT. GERBER
PARTLIST.rep PART LIST ASCII
BOM.rep Bill Of Materials ASCII
ext_gerber.USR EXTENDED GERBER APERTURE TABLE ASCII
CNC.USR NC DRILL DEVICE FILE ASCII
***DESIGN FILES:
CC2420DB_1_2.SCM CADSTAR SCHEMATIC FILE BINARY
CC2420DB_1_2.PCB CADSTAR WORK FILE (PCB) BINARY
CC2420DB_1_1.CPA CADSTAR WORK FILE (PCB) ASCII
***PDF FILES:
CC2420DB_1_2_p1.pdf SCHEMATIC PAGE1 (TOP LEVEL) PDF
CC2420DB_1_2_p2.pdf SCHEMATIC PAGE2 (RF PART) PDF
CC2420DB_1_2_p3.pdf SCHEMATIC PAGE3 (MICROCONTROLLER) PDF
CC2420DB_1_2_p4.pdf SCHEMATIC PAGE4 (vOLTAGE REGULATOR) PDF
CC2420DB_1_2_p5.pdf SCHEMATIC PAGE5 (RS-232) PDF
CC2420DB_1_2_p6.pdf SCHEMATIC PAGE5 (RAM) PDF
L1.PDF LAYER 1 PDF
L2.PDF LAYER 2 PDF
L3.PDF LAYER 3 PDF
L4.PDF LAYER 4 PDF
TOP_ASSEMBLY.PDF ASSEMBLY DRAWING COMPONENT SIDE PDF
BOTTOM_ASSEMBLY.PDF ASSEMBLY DRAWING SOLDER SIDE PDF
END.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.