____________________________________________________________________ ____________________________________________________________________ MiLAN Technology A Division of Digi International 1299 Orleans Drive * Sunnyvale, CA. 94089 Technical Support Phone: (408) 744 -2751 * FAX (408) 744-2771 E-Mail: support@milan.com * FTP: ftp.milan.com Sales Phone: (800) 466-4526 * FAX (408) 744-2793 World Wide Web: http://www.milan.com ____________________________________________________________________ IMPORTANT: MAKE SURE THAT YOU USE "SETIP" PROGRAM TO ASSIGN AN IP ADDRESS TO PRINT SERVER BEFORE POCEEDING Readme file for DIGI 6.0 FastPort firmware release with DigiLpr Windows printing utility April 96 ABOUT WIN95LPR.EXE (Digi International's Windows 95/98 lpr printing tool) Starting with firmware version 6.00 of the MiLAN Technology Fastport line of printer servers, a Windows 95/98 utility titled win95lpr.exe will be shipped. This utility allows users of Windows 95/98 or other winsock'ed systems to print from their local machine to Fastport print server connected printers. The utility requires that the local machine be configured with a winsock.dll (standard with Win95/98 and WinNT). ABOUT INSTALLING WIN95LPR.EXE To install this utility, users must first extract the setup utility from the diskette to a local drive (see readme.txt on distribution diskette) Once the utility is extracted, run the setup program from Windows. The setup utility will guide you through your choices, and will properly install and configure the utility. ABOUT USING WIN95LPR.EXE Once the setup procedure is finished, users must perform two steps to use the utility. First, users must run the win95lpr utility, and choose "queues - add queue" and fill in the values in this screen. The field titled "local printer-port name" should be a short descriptive name for the printer such as "xerox_49" or "KodakXLS". The local printer-port name can be a maximum of 8 characters long due to directory name length limitation. Once that is done, users must next go into the Windows control panel / printers screen. Windows 95/98 will ask the user to choose an appropriate printer driver. If Windows 95/98 asks whether this is a a local or network printer, users should choose "local" printer. Windows will then show a list of ports to connect the driver to, and users should choose the "Windows port name" they created in step one. Click OK and you are ready to print. PRINTING TO OLDER MODEL MIL-3000 AND MIL-3100 FASTPORTS WITH FIRMWARE => 3.5 < 4.8 When printing to the parallel port remove the _p1 or type in raw in lower case letters only in the "Choose from this list of print-queues on the FastPort." And for printing to the serial port use raw-s in lower case letters only. Please refer to the release 6.0 manual addendum for complete instructions on installation and use of the Digilpr tool. ____________________________________________________________________ ____________________________________________________________________Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.