[Version]
Signature="$CHICAGO$"
Provider=%S_Provider%
DriverVer=06/12/2006,1.0.0.0
; the following is needed for WHQL certification, choose an appropriate cat file name
CatalogFile=cudal.cat
Class=CudalControlledDevices
;/*static*/ const GUID CUDAL_GUID = { 0x92b5d269, 0xf794, 0x49d9, {0x8d, 0x29, 0xcc, 0x3d, 0xee, 0x8b, 0xa, 0x1} };
ClassGUID={92B5D269-F794-49d9-8D29-CC3DEE8B0A01}
;******************************************************************************
; Class Install section
;------------------------------------------------------------------------------
; install class, Windows 98:
[ClassInstall]
AddReg=_AddReg_ClassInstall
; install class, Windows 2000/XP:
[ClassInstall32]
AddReg=_AddReg_ClassInstall
; registry entries required for class
[_AddReg_ClassInstall]
HKR,,,,"%S_DeviceClassDisplayName%"
HKR,,Icon,,"-20"
;******************************************************************************
; Manufacturer section
;------------------------------------------------------------------------------
[Manufacturer]
%S_Mfg%=_Devices
;******************************************************************************
; Device section
;------------------------------------------------------------------------------
; TODO add correct Vid and Pid
[_Devices]
%S_DeviceDesc%=_Install1, USB\Vid_11a0&Pid_0001
;******************************************************************************
; Install section
;------------------------------------------------------------------------------
; driver-specific, Win98
[_Install1]
CopyFiles=_CopyFiles_sys_98
AddReg=_AddReg_SW1, _AddReg_98, _Parameters1_98
; device-specific, Win98
[_Install1.HW]
AddReg=_AddReg_HW1
; driver-specific, Win2000/XP
[_Install1.NTx86]
CopyFiles=_CopyFiles_sys
AddReg=_AddReg_SW1, _Parameters1_NT
; service-install, Win2000
[_Install1.NTx86.Services]
AddService = %S_DriverName%, 0x00000002, _NT_AddService, _NT_EventLog
; device-specific, Win2000
[_Install1.NTx86.HW]
AddReg=_AddReg_HW1
;******************************************************************************
; NT Service sections (Win2000/XP only)
;------------------------------------------------------------------------------
[_NT_AddService]
DisplayName = %S_ServiceDisplayName%
ServiceType = 1 ; SERVICE_KERNEL_DRIVER
StartType = 3 ; SERVICE_DEMAND_START
ErrorControl = 1 ; SERVICE_ERROR_NORMAL
ServiceBinary = %10%\System32\Drivers\%S_DriverName%.sys
[_NT_EventLog]
AddReg=_NT_EventLog_AddReg
[_NT_EventLog_AddReg]
HKR,,EventMessageFile,0x00020000,"%%SystemRoot%%\System32\IoLogMsg.dll;%%SystemRoot%%\System32\drivers\%S_DriverName%.sys"
HKR,,TypesSupported, 0x00010001,7
;******************************************************************************
; Registry sections ( Device1 )
;------------------------------------------------------------------------------
[_AddReg_98]
; required standard entries
HKR,,NTMPDriver,,%S_DriverName_98%.sys
HKR,,DevLoader,,*ntkern
[_AddReg_SW1]
; create registry key used to store configuration parameters
HKLM,"%S_ConfigPath%",,,
HKLM,"%S_ConfigPath%"\"%S_DeviceConfigPath1%",,,
[_AddReg_HW1]
; Create a link to the configuration key. This is absolutely required!
HKR,,DriverConfigurationPath,,\Registry\Machine\%S_ConfigPath%\%S_DeviceConfigPath1%
; Cleanup Wizard hook
HKR,,CleanupWizard_DeviceIdentString,,"{DAB6A146-D93E-48ab-B3E5-374AB8FFF277}"
; Device GUID for WinAmp remote control
; TODO generate a new GUID for each product and add here:
; const GUID APPLICATION_GUID = { 0x5300e82e, 0x92, 0x4f7b, { 0x96, 0xad, 0xeb, 0xdc, 0x6, 0x1d, 0x61, 0x6 } };
HKR,,DriverUserInterfaceGuid,,"{5300E82E-0092-4f7b-96AD-EBDC061D6106}"
; parameters used on Windows 98, Windows ME
[_Parameters1_98]
; ### modify here ###
HKLM,"%S_ConfigPath%"\"%S_DeviceConfigPath1%",PowerStateOnOpen,0x00010001, 0
HKLM,"%S_ConfigPath%"\"%S_DeviceConfigPath1%",PowerStateOnClose,0x00010001, 0
HKLM,"%S_ConfigPath%"\"%S_DeviceConfigPath1%",MinPowerStateUsed,0x00010001, 3
HKLM,"%S_ConfigPath%"\"%S_DeviceConfigPath1%",MinPowerStateUnused,0x00010001, 3
HKLM,"%S_ConfigPath%"\"%S_DeviceConfigPath1%",EnableRemoteWakeup,0x00010001, 1
HKLM,"%S_ConfigPath%"\"%S_DeviceConfigPath1%",AbortPipesOnPowerDown,0x00010001, 1
HKLM,"%S_ConfigPath%"\"%S_DeviceConfigPath1%",UnconfigureOnClose,0x00010001, 1
HKLM,"%S_ConfigPath%"\"%S_DeviceConfigPath1%",ResetDeviceOnClose,0x00010001, 0
HKLM,"%S_ConfigPath%"\"%S_DeviceConfigPath1%",MaxIsoPackets,0x00010001, 64
HKLM,"%S_ConfigPath%"\"%S_DeviceConfigPath1%",ShortTransferOk,0x00010001, 1
HKLM,"%S_ConfigPath%"\"%S_DeviceConfigPath1%",RequestTimeout,0x00010001, 1000
; parameters used on Windows 2000 and Windows XP
[_Parameters1_NT]
; ### modify here ###
HKLM,"%S_ConfigPath%"\"%S_DeviceConfigPath1%",PowerStateOnOpen,0x00010001, 0
HKLM,"%S_ConfigPath%"\"%S_DeviceConfigPath1%",PowerStateOnClose,0x00010001, 0
HKLM,"%S_ConfigPath%"\"%S_DeviceConfigPath1%",MinPowerStateUsed,0x00010001, 3
HKLM,"%S_ConfigPath%"\"%S_DeviceConfigPath1%",MinPowerStateUnused,0x00010001, 3
HKLM,"%S_ConfigPath%"\"%S_DeviceConfigPath1%",EnableRemoteWakeup,0x00010001, 1
HKLM,"%S_ConfigPath%"\"%S_DeviceConfigPath1%",AbortPipesOnPowerDown,0x00010001, 1
HKLM,"%S_ConfigPath%"\"%S_DeviceConfigPath1%",UnconfigureOnClose,0x00010001, 1
HKLM,"%S_ConfigPath%"\"%S_DeviceConfigPath1%",ResetDeviceOnClose,0x00010001, 0
HKLM,"%S_ConfigPath%"\"%S_DeviceConfigPath1%",MaxIsoPackets,0x00010001, 512
HKLM,"%S_ConfigPath%"\"%S_DeviceConfigPath1%",ShortTransferOk,0x00010001, 1
HKLM,"%S_ConfigPath%"\"%S_DeviceConfigPath1%",RequestTimeout,0x00010001, 1000
HKLM,"%S_ConfigPath%"\"%S_DeviceConfigPath1%",SuppressPnPRemoveDlg,0x00010001, 1
;******************************************************************************
; Copy Files section for Win98/ME
;------------------------------------------------------------------------------
[_CopyFiles_sys_98]
; File name of the driver binary.
cudal98.sys
;******************************************************************************
; Copy Files section for Win2000/XP
;------------------------------------------------------------------------------
[_CopyFiles_sys]
; File name of the driver binary.
cudal.sys
;******************************************************************************
; Options
;------------------------------------------------------------------------------
[ControlFlags]
; Advanced options can be specified here.
;******************************************************************************
; Destination Directories
;------------------------------------------------------------------------------
[DestinationDirs]
DefaultDestDir = 11 ; SYSTEM directory
_CopyFiles_sys_98 = 10,System32\Drivers
_CopyFiles_sys = 10,System32\Drivers
;******************************************************************************
; Disk Layout
;------------------------------------------------------------------------------
[SourceDisksNames]
1=%S_DiskName%,,
[SourceDisksFiles]
; File name of the driver binary.
cudal98.sys=1
cudal.sys=1
;******************************************************************************
; Text Strings
;------------------------------------------------------------------------------
[Strings]
; provider name
S_Provider="Chipcon"
; manufacturer name
S_Mfg="Chipcon"
; device class display name, shown in Device Manager
S_DeviceClassDisplayName="Cudal controlled devices"
; device description
S_DeviceDesc="TODO Add device description here"
; disk name
S_DiskName="Chipcon Cudal Driver Disk"
; file name of driver executable
S_DriverName_98="cudal98"
S_DriverName="cudal"
; service display name
S_ServiceDisplayName="Cudal Driver (cudal.sys)"
;
; configuration registry path (where the registry parameters will be located)
S_ConfigPath="SYSTEM\CurrentControlSet\Services\Cudal"
; device-specific configuration registry path
S_DeviceConfigPath1="Parameters"
; *** EOF ***
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.