1. Q2V90-UP.EXE Driver
2. RN6429Q2.TXT File Contents

RN6429Q2.TXT Driver File Contents (Q2V90-UP.EXE)

QUESTER II V.90 Release Notes


General:

A Quester II V.90 Modem is a Quester II V.34 Modem 
(GDC P/N S-060A202-001) that has been upgraded with new
Flashrom code (Version 6.4.2.9 or higher) to support
V.90 (56K). Only a Quester II with flash memory GDC 
P/N S-060A202-001 modem can be upgraded.


Features added :

V.90 Analog (Client) Modem mode of operation
DTE rate of 230.4kbps
Additional V.90 commands and connect messages
(Refer to Quester II V.90 Manual Addendum for details.)

NOTE:
The V.90 standard provides the ability for a V.90 analog
client modem to connect to a V.90 digital modem at down 
line speeds from 28Kbps to 56Kbps. Currently the max speed
allowed in the U.S. is 53Kbps. Typical connections average
46Kbps. There is no guarantee that V.90 will work on any 
analog line. For more information see the application brief
on www.gdc.comweb site.

The Quester II V.90 modem requires additional program space
to support the V.90 modulation standard. To accomplish this
, the following features and options found in the Quester
II V.34 modem are no longer available:

• MNP protocol (V.42/V.42 bis will be used exclusively)
• Alphanumeric Help Screen
• V25 bis Dialer
• Remote Configuration of User Defaults (Extended AT* commands)
• RDL, DL Tests (not supported in V.42)
• Factory Defaults #2 and #3
• Storable Transmit Level Adjustments
• Analog Loopback (for lower speed modulations)

NOTE:
You can restore these features by accessing the GDC internet site
at www.gdc.com to download and install Quester V.34 software. The
site also provides complete instructions for this procedure. 
Restoring Quester II V.34 software will remove the V.90 features
and enable the original V.34 feature set.


Supporting Your Quester II V.90 Modem

Your Quester II V.90 is designed to interface seamlessly with 
Windows 95, Windows 98 and NT 4.0 via a dedicated modem device 
driver. You will need to access the GDC internet site at www.gdc.
com to download and install the Quester III V.90 Modem driver 
(Q3V90D.inf). The site also provides complete instructions for 
this procedure.

NOTE:
Once upgraded to Quester II V.90 capability, you must install the
V.90 Modem driver(Q3V90D.INF)listed above in order to ensure full
functionality.