;=========================================================================================================================
;
; GeneralTouch Touchscreen USB interface
;
; USB Touchscreen driver for Windows 2000/XP.
;
; ReadMe file for touchscreen driver package
;
; Release 2.2
;
; Copyright 2004-2010,GeneralTouch Technology Co., Ltd. all rights reserved.
;
;=========================================================================================================================
The GeneralTouch Touchscreen USB interface driver package for Windows 2000 and XP
contains a HID (Human Interface Device) filter driver designed for Windows using
the WDM (Windows Driver Model) architecture, calibration program, uninstall utility,
and a 32-bit control panel.
==================================
Supported Touchscreen controller
==================================
- GeneralTouch PnP-compliant usb controller 2038,4001u
--------------------------------------------------------
| |
| This driver does not support GeneralTouch serial |
| controller 2036,2037,4001s,4001s-M. |
| |
| Refer to www.Generaltouch.com for availability of |
| drivers for these products. |
| |
--------------------------------------------------------
==============================
CONTENTS
==============================
1.Install/Uninstall Manual
1.1 Installing touchscreen driver for Windows 2000/XP
1.2 Change touchscreen settings
1.3 Uninstall touchscreen software
1.4 Release Notes
2.Software package component
3.Problem solution
==============================
1. Install/Uninstall Manual
==============================
1.1 Installing touchscreen driver for Windows 2000/XP
Note to Windows 2000/XP users: you must have administrator access rights on
your Windows 2000/XP system to install this software. You must also have
administrator access rights to run the touchscreen control panel and
calibration applications.
Shutdown your computer and connect your touchscreen as described
in the accompanying documentation.
A. If Windows STARTS the New Hardware Wizard
--------------======------------------------
1. Choose Next. Select "Search for the best driver for
your device (Recommended)" and Choose Next.
2. When a list of search locations is displayed, place a
checkmark on the floppy drive containing this USB driver
for Windows disk. Insert the disk into your floppy drive.
(If the driver files have been copied to your hard drive or
have been distributed on CD, place a checkmark on "Specify
a location" and use Browse to select the directory
containing the driver files.)
3. Choose Next. Once the GeneralTouch Touchscreen USB
Interface driver has been detected choose Next again.
4. Wait while driver files are copied to your computer. Insert
your Windows CD if prompted.
5. Choose Finish.
B. If Windows DOES NOT START the New Hardware Wizard
--------------==============------------------------
1. After Windows loads, click the "Start" button, and then
click "Control Panel", "System", "Device Manager".
2. In the Device Manager, right click on the USB Human
Interface Device, and then click on Properties, Driver
tab, Update Driver, Next. Select "Search for the best driver
for your device (Recommended)" and Choose Next.
3. When a list of search locations is displayed, place a
checkmark on the floppy drive or CD containing this USB driver
for Windows disk. Insert the disk into your drive. (If the
driver files have been copied to your hard drive, place a
checkmark on "Specify a location" and use Browse to select
the directory containing the driver files.)
4. Choose Next. Once the GeneralTouch Touchscreen USB
Interface driver has been detected choose Next again.
5. Wait while driver files are copied to your computer. Insert
your Windows CD if prompted.
6. Choose Finish.
7. The touchscreen calibration application, GenCalib.exe, must be used
manually to align cursor movement with point of touch.
=========================================
1.2 Change Touchscreen settings
=========================================
1. Click the "Start" button, point to "Settings", and then click
"Control Panel".
2. Double-click the "GeneralTouch Touchscreen" icon,now you can change
your touchscreen settings, For more information about touchscreen
settings,you can use context_sensitive help.
=========================================
1.3 Uninstalling touchscreen driver for Windows 2000/XP.
=========================================
1. Click the "Start" button, point to "Settings", and then click
"Control Panel".
2. Double-click the "Add/Remove Programs" icon.
3. Select "GeneralTouch Touchscreen USB interface for 2000/XP" from
the list of uninstallable programs on the "Install/Uninstall" tab.
4. Click the "Add/Remove" button then follow the directions on
your screen.
===============================
1.4 Release Notes
===============================
- Because your GeneralTouch Touchscreen USB interface controller conforms to the USB HID
class specification, Windows 2000/XP supports it inherently with default HID class
drivers. You may notice that a touch will move the Windows cursor even before you install
this device driver package for Windows.
However, you must install this driver package in order to install and use the calibration
application (used to correctly align your finger to the Windows cursor) and our
control panel.
- Windows 2000/XP only: you must have administrator access rights to
run the GeneralTouch Touchscreen control panel and calibration
applications.
===============================
2. Software package component
===============================
Our touchscreen USB interface driver software package is composed of the following programs:
GenUsb.Sys Our touchscreen USB driver(using WDM architecture)
GenUsbXp.Inf Our touchscreen HID interface INF file
GenPanel.Cpl 32 bit Touchscreen control panel.
UnInst.exe 32 bit Touchscreen uninstall utility.
GenCalib.exe 32 bit Touchscreen calibration program.
GenUsb.hlp context_sensitive help file.
Null.cur null cursor.
README.txt It's me!
Setup.exe 32 bit Touchscreen install utility.
GenUsbXp.cat Catalog file
==============================
3. Problem solution
==============================
- Make sure that your USB host controller and root hub is available before installation,
some mainboard can disable usb function in CMOS setup,you should enable it and install default
driver for it.
===================================
4. Revision History
===================================
GenPanel.cpl V2.2.0.3 Updated 2006.9.14
;==================================================================================================================
;
; Copyright 2004,2006 GeneralTouch Technology Co., Ltd. All rights reserved.
;
; (http://www.GeneralTouch.com)
;
;==================================================================================================================
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.