Drivers Installation Readme
for
Windows NT V3.1 & Windows for Workgroups V3.11
==============================================
***********************************************
* README for Windows NT V3.1 Installation *
***********************************************
The Ethernet LAN drivers of EZ2000 cards for Windows NT contained in this
diskette are as follows:
\NT31\EZ2000.SYS NDIS 3.0 driver for Windows NT
\NT31\OEMSETNT.INF OEMSETUP file for Windows NT
\DISK1
Installation Procedure:
(1) When LAN drivers is installed, Windows NT will present a list of all
available drivers. Since there will be no EZ2000 drivers
initially, select OTHERS for 3rd party adapters not in the driver list.
(2) Windows NT will ask for the drive/path containing the EZ2000 Windows NT
drivers. Insert the driver diskette in drive A: and respond with
the following
A:\NT31
(3) Windows NT will attempt to locate an OEMSETNT.INF file in the specified
path. If you have entered the path name correctly, Windows NT should copy
the appropriate drivers to the Windows NT system.
(4) At this point, the driver would have been properly copied and the
installation would proceed to the next step. Please refer to your
Windows NT installation guide for correct procedures.
(5) After the initial installation, the EZ2000 drivers will be permanently
copied to the Windows NT system. Subsequent network driver lists will
already contain EZ2000 driver.
**********************************************************
* README for Windows for Workgroups V3.11 Installation *
**********************************************************
The Ethernet LAN drivers of EZ2000 cards for Windows for Workgroups
contained in this diskette are as follows:
\WFW311\EZ2000.386 NDIS 3.0 WFW driver for Windows for Workgroups
\WFW311\EZ2000.DOS NDIS 2.0 DOS driver for Windows for Workgroups
\WFW311\EZ2000.COM ODI driver for Windows for Workgroups
\WFW311\NET.CFG NET.CFG file for Windows for Workgroups
\WFW311\OEMSETUP.INF OEMSETUP file for Windows for Workgroups
\DISK1
Installation Procedure:
(1) When LAN drivers is installed, Windows for Workgroups will present a list
of all available drivers. Since there will be no EZ-2000 drivers
initially, select UNLIST for 3rd party adapters not in the driver list.
(2) Windows for Workgroups will ask for the drive/path containing the EZ2000
Windows for Workgroups drivers. Insert the driver diskette in
drive A: and respond with the following
A:\WFW311
(3) Windows for Workgroups will attempt to locate an OEMSETUP.INF file in the
specified path. If you have entered the path name correctly, Windows
for Workgroups should copy the appropriate drivers to the Windows for
Workgroups system.
(4) At this point, the driver would have been properly copied and the
installation would proceed to the next step. Please refer to your
Windows for Workgroups installation guide for correct procedures.
(5) After the initial installation, the EZ2000 drivers will be permanently
copied to the Windows for Workgroups system. Subsequent network driver
lists will already contain EZ2000 drivers.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.