[SYSTEM] Language=English font=MS Sans Serif size=12 charset=0 [MESSAGE] 0="EMP NS Connection Ver.2.0" 1="This application will not run on your current version of the OS. Upgrade your OS." 2="This application is already running." 4="The slide show may will not begin until PowerPoint is restarted." 5="Network adapter information could not be obtained." 6="Connection in Quick Connection Mode failed as no IP address is available." 7="An error has occurred in the EMP NS Connection driver." 8="A communication error has occurred. Do you want to reconnect the projector?" 9="Connection to the projector failed." 10="EMP NS Connection initialization failed." 11="Attempt to reconnect to the projector failed." 12="An error has occurred in communication with the projector. Do you want to reconnect the projector?" 13="Reconnection failed after changing the resolution." 14="Projector URL display failed." 15="The application closed due to insufficient memory." 16="Network adapter information could not be obtained. Check the network configuration and restart the computer." 17="Projector control failed." 18="EMP NS Connection does not support display resolutions exceeding UXGA (1600 x 1200 pixels). Reduce the screen resolution and retry." 19="The keyword does not match. Re-enter the keyword displayed on the projector screen." 20="The version of the activated application is incorrect." 22="A network error occurred." 23="The projector has disconnected." 24="Another PC has connected to the currently connected projector. The projector was disconnected." 25="The selected projector is busy. Do you want to continue the connection process?" 26="A maximum of four projectors may be connected at once." 27="When connecting to two or more projectors, the encryption function of Network Presentation is not available. Do you want to connect the projectors without encryption?" 28="The IP address entered is already registered." 29="One or more connected projectors do not support resolutions greater than SXGA. Reduce the screen resolution and reconnect." 30="Failed to open the file." 31="Failed to save the file." 32="Enter the keyword displayed on the projector screen." 33="Connection failed due to keyword mismatch." 34="Folders should not be created more than 5 layers deep. " 35="Enter max. 32 characters." 36="Enter the Profile Name." 37="Failed to switch to Movie Sending Mode." 38="The connected projectors do not support Movie Sending." 39="Failed to reconfigure the firewall settings." 40="Failed to recover the firewall settings." 41="Failed to read in the EMP_NSPC.dll file." 42="One or more projectors is not responding." 43="No projector was found." 44="The AirPort network is not available or enabled. Projector search failed." 45="Could not obtain information from the AirPort network. Projector search failed." 46="ESSID switching failed." 47="Wireless security is enabled. Could not restore ESSID." 48="While EPSON USB Display is starting, you cannot start EMP NS Connection." 80="Unable to search for projectors due to firewall. Do you want to disable the firewall?" 81="Do you want to overwrite the current profile?" 82="Do you want to delete the selected profile or folder?" 86="Do you want to delete the selected projector information?" 100="OK" 101="Cancel" 102="Yes" 103="No" 111="Select Connection Mode." 112="Quick Connection Mode" 113="Advanced Connection Mode" 114="Set the selected Connection Mode as the default mode for future connections. \n(Do not display this window again.)" 117="Select the network adapter you want to use." 118="Use all network adapters." 120=" - Quick Connection -" 121=" - Advanced Connection -" 122="Automatic search" 123="Manual search" 125="Update information" 126="Save list" 127="Clear list" 128="Set options" 129="Connect" 130="Select a projector and connect it." 131="Disable interrupt connection" 132="Use multi-display" 133="Display layout" 134="Display properties" 151="Enter the profile name and specify where to save the profile." 152="Profile name" 153="Save in" 154="Add" 155="Untitled" 156="Save as" 157="Enter the Profile Name." 161="Profile" 162="Information on selected profile" 163="Copy" 164="Delete" 165="Rename" 166="Create folder" 167="Export" 168="Import" 170="Close" 171="New folder" 172="Copy" 173="Enter a New Name." 174="New Name" 181="General settings" 182="Adjust performance" 183="Use full-screen video transfer" 184="Encrypt communications" 185="Display Connection Mode window on startup" 186="Edit profile" 187="Switch LAN" 188="Adjust the Movie quality" 189="Adjust transmission interval" 190="Transfer layered window" 191="Select startup option" 192="Fine" 193="Normal" 194="Fast" 195="Automatic search on startup" 196="Specify search method after startup" 197="Search with the last network configuration" 199="Image Quality" 211="Enter the keyword displayed on the projector screen." 213="Keyword" 221="Disconnect" 222="ALL" 223="Simple" 224="Normal" 225="Full" 226="Display the Tool Bar" 227="Show" 228="Stop" 229="Pause" 230="Movie Sending Mode" 231="Presentation Mode" 235="Select target projector" 240="Projector control" 241="A/V Mute" 242="Switch PC source" 244="Switch video source" 250="Select a projector." 251="Status" 252="Projector name" 253="ESSID" 254="Signal intensity" 255="Display" 256="IP address" 257="No." 259="Standby" 261="Busy" 262="Currently in use by another applicaton" 263="Not found." 264="Searching" 270="Screen Preview" 282="Movie file list" 283="Select file" 285="Movie file" 291="Select the projector for Movie Sending. " 292="Destination projector for Movie Sending" 302="Enter the projector IP address or name." 303="Select the ESSID of the projector to be connected." 320="Files are missing or invalid. Failed to start the application. Reinstall/remove the application." 321="Add/Remove EPSON Virtual Display" 322="Select the virtual display to use. If you want to select a virtual display other than the one currently in use, you will need to restart your computer." 323="Restarting your computer will remove the virtual display. Do you want to restart your computer now?" 324="Administrator privileges required to install/uninstall this program.\nInstallation aborted." 340="Version" 342="Starting…" 343="You are about to remove the USB Display from your computer. Would you like to continue?" 344="Remove EPSON USB Display" 345="Restarting your computer will remove the EPSON USB Dislay. Do you want to restart your computer now?" 346="Are you sure you want to quit the setup?" 347="Agree" 348="Disagree" 349="While EMP NS Connection is starting, you cannot start EPSON USB Display." 350="EPSON USB Display does not support display resolutions exceeding UXGA (1600 x 1200 pixels). Reduce the screen resolution and retry."Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.