Firmware upgrade for Sony CRX-100E CD-RW to version 1.0n 1. The flash utility must be run only in real DOS mode (not in windows DOS box). 2. During the flash you must have not disc in the drive. UPDCRX.EXE commands UPDCRX filename /AT|/98 [/P|/1|/2] [/M|/S] You must at least set [filename] and [/AT or /98]. [Option] filename :Update filename /AT : PC/AT compatible /98 : PC-98xx /P,/1 : Primary /2 : 2ndary /M : Master /S : Slave /C : Write sequence change The 4 possible combinations are : 1st IDE Master : updcrx21 100E_10N.bin /AT /1 /M 1st IDE Slave : updcrx21 100E_10N.bin /AT /1 /S 2nd IDE Master : updcrx21 100E_10N.bin /AT /2 /M 2nd IDE Slave : updcrx21 100E_10N.bin /AT /2 /S Flashing the drive is done at you own risk. A bad use of the software could damage you drive definitively.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.